Type CD4 High-Frequency, Mica Capacitors Ultra-High-Frequency Capacitor for CATV and RF Applications 0.1 Lead Spacing Nearly the textbook ideal capacitor for high-frequency applications, Type CD4 is rock stable over its full temperature and voltage range. Higher self-resonant frequency and lower equivalent series inductance makes CD4 even better than CD17 and CD18 for high-frequency applications. 0.1" lead spacing means CD4 can replace ceramic capacitors on printed circuit boards. Highlights * * * * * * * * Higher self-resonant frequency and lower equivalent series inductance than CD17 and CD18 Low impedance to beyond 1 GHz Replaces other 0.1" lead-spacing capacitors Cool operation--Typical Qs > 2000 Shockproof and delamination free Near zero capacitance change with frequency and temperature 100,000 V/s dV/dt capability minimum Zero capacitance change with voltage Specifications Voltage Range: 100 Vdc to 500 Vdc Capacitance Range: 1 pF to 1,500 pF Capacitance Tolerance: 1/2 pF (D), 1 pF (C),12% (E)1% (F),1% (F),2% (G), 5% (J) Temperature Range: -55 C to +125 C Ratings Catalog (pF) Part Number L In (mm) 910 1000 1100 1200 1500 CD4FA911J03 CD4FA102J03 CD4FA112J03 CD4FA122J03 CD4FA152J03 .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) 560 620 680 750 820 CD4FC561J03 CD4FC621J03 CD4FC681J03 CD4FC751J03 CD4FC821J03 .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) 1 CD4CD010D03 2 CD4CD020D03 3 CD4CD030D03 4 CD4CD040D03 5 CD4CD050D03 6 CD4CD060D03 7 CD4CD070D03 8 CD4CD080D03 10 CD4CD100J03 12 CD4CD120J03 15 CD4CD150J03 18 CD4CD180J03 20 CD4ED200J03 22 CD4ED220J03 24 CD4ED240J03 27 CD4ED270J03 30 CD4ED300J03 33 CD4ED330J03 36 CD4ED360J03 .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) H In (mm) 100 Vdc .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) 300 Vdc .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) 500 Vdc .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) T In (mm) S In (mm) d In (mm) .160 (4.1) .160 (4.1) .160 (4.1) .170 (4.3) .180 (4.6) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) (pF) 39 43 47 50 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 250 270 300 330 360 390 430 470 500 510 Catalog Part Number CD4ED390J03 CD4ED430J03 CD4ED470J03 CD4ED500J03 CD4ED510J03 CD4ED560J03 CD4ED620J03 CD4ED680J03 CD4ED750J03 CD4ED820J03 CD4FD910J03 CD4FD101J03 CD4FD111J03 CD4FD121J03 CD4FD131J03 CD4FD151J03 CD4FD161J03 CD4FD181J03 CD4FD201J03 CD4FD221J03 CD4FD241J03 CD4FD251J03 CD4FD271J03 CD4FD301J03 CD4FD331J03 CD4FD361J03 CD4FD391J03 CD4FD431J03 CD4FD471J03 CD4FD501J03 CD4FD511J03 L In (mm) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .290 (7.4) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) .340 (8.6) H In (mm) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.6) .220 (5.8) .220 (5.8) .220 (5.8) .240 (6.1) .240 (6.1) .240 (6.1) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) T In (mm) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .110 (2.8) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) .160 (4.1) S In (mm) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) d In (mm) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) .020 (.5) CDE Cornell Dubilier*1605 E. Rodney French Blvd.*New Bedford, MA 02744*Ph: (508)996-8561*Fax: (508)996-3830* www.cde.com Type CD4 High-Frequency, Mica Capacitors Typical Performance Curves Insertion Loss Over the frequency range of 100 MHz to 1 GHz the insertion loss in a balanced 50 or 75 system is flat 0.2 dB. A typical test setup is below. Insertion Loss vs. Frequency for CD17FC621JO3, 75 System Choosing CD4, CD16, CDV16, CD18 or CDV18 While insertion loss is flat within .2dB through 1 GHz, you may be able to avoid the small notch by changing the capacitor type to fit your capacitance. See table at right. TYPE Flat to Above 1 GHz CD17 470 pF max CD4 620 pF max CD16 870 pF CDV16 870 pF CD18 660 pF max CDV18 1000 pF max CDE Cornell Dubilier*1605 E. Rodney French Blvd.*New Bedford, MA 02744*Ph: (508)996-8561*Fax: (508)996-3830* www.cde.com Type CD4 High-Frequency, Mica Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the "Information") in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements ("Cornell Dubilier") has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter - and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier*1605 E. Rodney French Blvd.*New Bedford, MA 02744*Ph: (508)996-8561*Fax: (508)996-3830* www.cde.com