RF01001, Rev. A (1/4/13) ©2013 Microsemi Corporation Page 1 of 7
MSMCG5.0A – MXLSMCG170CAe3,
MSMCJ5.0 – MXLSMCJ170CAe3
Available Surface Mount 1500 Watt
Transient Voltage Suppressor
Screening in
reference to
MIL-PRF-19500
available
DESCRIPTION
The MSMCG(J)5.0A through MXLSMCG(J)170A series of 1500 watt high-reliability Transient
Voltage Suppressors (TVSs) protects a variety of voltage-sensitive compone nts. The SMCG gull-
wing design i n the DO -215AB package allows for visible solder connections. The SMCJ J-bend
design in the DO-214AB package allows for greater PC board m ount i ng density. Selections include
uni d i r ect i o n al and bi di r ec tion al as w el l as R oHS compliant versions. These are available w i t h a
var i e ty of up sc ree ni ng opt ion s f or en h anc ed r el i ab i l i ty. They can protect against the secondary
effects of li ghtnin g per I EC61000-4-5 and against voltage pulses from inductive switching
environments and induced by RF radiation. Since their res ponse tim e i s vir tually instantaneou s,
they can also be used in protection from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.
DO-215AB
(SMCG) Package
DO-214AB
(SMCJ) Package
NOTE: All SMC series are
equival ent to pri or SMM pa ckage
identifications.
Also avai l able:
Commercial grade
SMCG(J)5.0A –
SMCG(J)170CAe3
Important: For the lates t inform ation, v isit our website http://www.microsemi.com.
FEATURES
• High reliability devices with fabrication and ass embly lot traceability.
• All devi ces are 100% surge tested.
• 3σ lot norm screening performed on standby current (ID).
• Availabl e in both unidirectional and bidi rectional versions.
• Moisture classifi catio n is “Level 1” with no dry pack required per IPC/JEDEC J-STD-020B.
• Enhanced reliability screening opt ions are available in reference to MIL-PRF-19500.
Refer to High Reliability Up-Screened Plastic Products Portfolio for more details on the screening
options.
(See part nomenclature for all available options).
• RoHS compliant versions available.
• Axial-lead equivalent packages for thru-hole mount ing are available as 1.5KE6.8A to 1.5KE200CA
or 1N6267 thru 1N6303A and 1N5908 (contact Mi crosemi for other surface mount options).
APPL ICATIONS / BENEF ITS
• High-reliabil ity devices.
• Selections for 5.0 to 170 volts standoff voltages (VWM).
• Protection from switching transients and induced RF.
• Protecti on from ESD, and EFT per IE C 61000-4-2 and IEC 61000-4-4.
• Secondary lightning protecti on per IEC61000-4-5 with 42 ohms source impedance:
Class 1: MSMC 5.0A to MXLSMC 170A or CA
Class 2: MSMC 5.0A to MXLSMC 150A or CA
Class 3: MSMC 5.0A to MXLSMC 75A or CA
Class 4: MSMC 5.0A to MXLSMC 36A or CA
• Secondary lightning protecti on per IEC61000-4-5 with 12 ohms source impedance:
Class 1: MSMC 5. 0A to MXLSM C 90A or CA
Class 2: MSMC 5.0A to MXLSMC 45A or CA
Class 3: MSMC 5.0A to MXLSMC 24A or CA
Class 4: MSMC 5.0A to MXLSMC 11A or CA
• Secondary lightning protecti on per IEC61000-4-5 with 2 ohms source impedance:
Class 2: MSMC 5.0A to MXLSMC 22A or CA
Class 3: MSMC 5.0A to MXLSMC 10A or CA
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
RF01001, Rev. A (1/4/13) ©2013 Microsemi Corporation Page 2 of 7
MSMCG5.0A – MXLSMCG170CAe3,
MSMCJ5.0 – MXLSMCJ170CAe3
MAX IMUM RATING S
Parameters/Test Condi tions
Symbol
Value
Unit
Junction and Storage Temperature
TJ and TSTG
-65 to +150
ºC
Thermal Resistance Junction-to-Lead
RӨJL
20
ºC/W
Thermal Resistance Junction-to-Ambient (1)
RӨJA
80
ºC/W
Peak Pulse Power Dissipation @ 25 ºC (at 10/1000 µs,
see Figures 1, 2, and 3)
P
PP
1500
W
Impulse Repetition Rate (duty factor)
df
0.01
%
t
clamping
(0 volts to V
(BR)
min.)
Unidirectional
Bidirectional
t
clamping
<100
<5
ps
ns
Rated Average Power Dissipation
T
L
= +30 ºC
T
A
= +25 ºC
P
M(AV)
6
1.56(1)
W
Maximum Forward Surge Current (2)
I
FSM
200
A (pk)
Solder Temperature @ 10 s
TSP
260
oC
Notes: 1. When mounted on FR4 PC board (1oz Cu) with recommended footprin t (see last page).
2. Peak impulse of 8.3 ms half-si ne wave at 25 ºC (unidirectional only).
M ECHANICAL and PACKAGING
• CASE: Void-free transfer molded thermosetting epoxy body meeti ng UL94V-0.
• TERMINALS: Tin-lead or RoHS compliant ann ealed matte-tin plating. So lderable to MI L-STD-750, method 2026.
• MARKING: Part number marked on package.
• POLARITY: Cathode indicated by band. No cathode band on bi-directional devices.
• TAPE & REEL option: Standard per EIA-481-2 with 16 mm tape (add “TR” suffix to part number). Consult factory for quantities.
• WEIGHT: Approximately 0.25 grams.
• See Package Dimensions on last page.
PART NOMENCLATURE
MX SM C G 5.0 C A e3
Reliability Level*
M
MA
MX
MXL
*(see
High Reliability
Up-Screened Plastic
Products Portf olio )
Surface M ount
Package
1500 W Power Level
Gull-wing Lead Frame
G = Gull-Wing
J = J-Bend
RoHS Compliance
e3 = RoHS Compl iant
Blank = non-RoHS Compliant
+/- 5% Tolerance Level
Uni/Bidirectional
C = Bi directional
Blank = Unidirectional
Reverse Stand-Off Voltage
(see Electrical Characteristics
table)
RF01001, Rev. A (1/4/13) ©2013 Microsemi Corporation Page 3 of 7
MSMCG5.0A – MXLSMCG170CAe3,
MSMCJ5.0 – MXLSMCJ170CAe3
SYMBOLS & DEFINITI ONS
Symbol
Definition
I(BR)
Breakdown Current: The current used for measuring breakdown voltage V(BR) .
ID
Standby Current: The current at the rated standoff voltage (VWM).
IF
Forward Current: The forward current dc value, no alternating component.
IO Average Rectified Output Current: The output current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave input
and a 180 degree conduction angle.
IPP
Peak Impulse Current: The peak current during the impulse.
PPP
Peak Pulse Power: The peak power dissipation resulting from the peak impulse current IPP.
VC
Cla mping Volta ge: Maximum clamping voltage at specified IPP (Peak Pulse Current) at the specified pulse conditions.
V(BR)
Minimum B reakdown Voltage: The minimum voltage the device will exhibit at a specified current.
VWM
Working Peak Voltage: The maximum peak voltage that c an be applied over the operating temperature range. This is
also referred to as standoff voltage.
ELECTRICAL CHARACTERISTICS @ 25 ºC unl ess otherwis e stat ed
MICROSEMI PART NUMBER REVERSE
STAND-OFF
VOLTAGE
VWM
Volts
BREAKDOWN
VOLTAGE
V(BR) @ I (BR)
Volts
MAXIMUM
CLAMPING
VOLTAGE
@ I PP
Volts
PEAK PULSE
CURRENT
(See Fig. 2)
IPP
Amps
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
µA
Gull-Wing
J-Bend
MIN. MAX.
I
(BR)
mA
MSMCG5.0A
MSMCG6.0A
MSMCJ5.0A
MSMCJ6.0A
5.0
6.0
6.40 – 7.00
6.67 – 7.37
10
10
9.2
10.3
163.0
145.6
1000
1000
MSMCG6.5A
MSMCG7.0A
MSMCJ6.5A
MSMCJ7.0A
6.5
7.0
7.22 – 7.98
7.78 – 8.60
10
10
11.2
12.0
133.9
125.0
500
200
MSMCG7.5A
MSMCG8.0A
MSMCJ7.5A
MSMCJ8.0A
7.5
8.0
8.33 – 9.21
8.89 – 9.83
1
1
12.9
13.6
116.3
110.3
100
50
MSMCG8.5A
MSMCG9.0A
MSMCJ8.5A
MSMCJ9.0A
8.5
9.0
9.44 – 10.4
10.0 – 11.1
1
1
14.4
15.4
104.2
97.4
20
10
MSMCG10A
MSMCG11A
MSMCJ10A
MSMCJ11A
10
11
11.1 – 12.3
12.2 – 13.5
1
1
17.0
18.2
88.2
82.4
5
5
MSMCG12A
MSMCG13A
MSMCJ12A
MSMCJ13A
12
13
13.3 – 14.7
14.4 – 15.9
1
1
19.9
21.5
75.3
69.7
5
1
MSMCG14A
MSMCG15A
MSMCJ14A
MSMCJ15A
14
15
15.6 – 17.2
16.7 – 18.5
1
1
23.2
24.4
64.7
61.5
1
1
MSMCG16A
MSMCG17A
MSMCJ16A
MSMCJ17A
16
17
17.8 – 19.7
18.9 – 20.9
1
1
26.0
27.6
57.7
53.3
1
1
MSMCG18A
MSMCG20A
MSMCJ18A
MSMCJ20A
18
20
20.0 – 22.1
22.2 – 24.5
1
1
29.2
32.4
51.4
46.3
1
1
MSMCG22A
MSMCG24A
MSMCJ22A
MSMCJ24A
22
24
24.4 – 26.9
26.7 – 29.5
1
1
35.5
38.9
42.2
38.6
1
1
MSMCG26A
MSMCG28A
MSMCJ26A
MSMCJ28A
26
28
28.9 – 31.9
31.1 – 34.4
1
1
42.1
45.4
35.6
33.0
1
1
MSMCG30A
MSMCG33A
MSMCJ30A
MSMCJ33A
30
33
33.3 – 36.8
36.7 – 40.6
1
1
48.4
53.3
31.0
28.1
1
1
MSMCG36A
MSMCG40A
MSMCJ36A
MSMCJ40A
36
40
40.0 – 44.2
44.4 – 49.1
1
1
58.1
64.5
25.8
23.2
1
1
MSMCG43A
MSMCG45A
MSMCJ43A
MSMCJ45A
43
45
47.8 – 52.8
50.0 – 55.3
1
1
69.4
72.7
21.6
20.6
1
1
MSMCG48A
MSMCG51A
MSMCJ48A
MSMCJ51A
48
51
53.3 – 58.9
56.7 – 62.7
1
1
77.4
82.4
19.4
18.2
1
1
MSMCG54A
MSMCG58A
MSMCJ54A
MSMCJ58A
54
58
60.0 – 66.3
64.4 – 71.2
1
1
87.1
93.6
17.2
16.0
1
1
MSMCG60A
MSMCG64A
MSMCJ60A
MSMCJ64A
60
64
66.7 – 73.7
71.1 – 78.6
1
1
96.8
103.0
15.5
14.6
1
1
MSMCG70A
MSMCG75A
MSMCJ70A
MSMCJ75A
70
75
77.8 – 86.0
83.3 – 92.1
1
1
113
121
13.3
12.4
1
1
Continued.
RF01001, Rev. A (1/4/13) ©2013 Microsemi Corporation Page 4 of 7
MSMCG5.0A – MXLSMCG170CAe3,
MSMCJ5.0 – MXLSMCJ170CAe3
ELECTRICAL CHARACTERISTICS @ 25 ºC unl ess otherwis e stat ed ( continued)
MICROSEMI PART NUMBER REVERSE
STAND-OFF
VOLTAGE
VWM
Volts
BREAKDOWN
VOLTAGE
V(BR) @ I (BR)
Volts
MAXIMUM
CLAMPING
VOLTAGE
@ I PP
Volts
PEAK PULSE
CURRENT
(See Fig. 2)
IPP
Amps
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
µA
Gull-Wing
J-Bend
MIN. MAX.
I
(BR)
mA
MSMCG78A
MSMCG85A
MSMCJ78A
MSMCJ85A
78
85
86.7 – 95.8
94.4 – 104.0
1
1
126
137
11.4
10.4
1
1
MSMCG90A
MSMCG100A
MSMCJ90A
MSMCJ100A
90
100
100 – 111
111 – 123
1
1
146
162
10.3
9.3
1
1
MSMCG110A
MSMCG120A
MSMCJ110A
MSMCJ120A
110
120
122 – 135
133 – 147
1
1
177
193
8.4
7.8
1
1
MSMCG130A
MSMCG150A
MSMCJ130A
MSMCJ150A
130
150
144 – 159
167 – 185
1
1
209
243
7.2
6.2
1
1
MSMCG160A
MSMCG170A
MSMCJ160A
MSMCJ170A
160
170
178 – 197
189 – 209
1
1
259
275
5.8
5.5
1
1
RF01001, Rev. A (1/4/13) ©2013 Microsemi Corporation Page 5 of 7
MSMCG5.0A – MXLSMCG170CAe3,
MSMCJ5.0 – MXLSMCJ170CAe3
GRAPHS
t – Ti me (ms ec )
tp – Pulse Time – sec
FIGURE 2 – Pulse Waveform
FIGURE 1 – Peak P ulse Power vs. P ulse Time
TL Lead Temperature oC BV – Breakdown Voltage (V)
FIGURE 3 – Deratin g Cu rve FIGURE 4
Typical C apacitanc e vs .
Breakdown Vol tage (unidirectional configuration)
NOTE: Bidirectional capacitance is hal f that shown at zero volts.
1µs 10µsec 100µsec 1ms 10ms
(P
PP
) – Peak Pulse Power - kW
(Waveform – See F igu re 2)
Non-repetitive
Peak Pulse Power (
P
PP) or continuous
Power in Percent of 25
o
C Rating
100
10
1.0
0
I
PP
– Peak Pulse Current - % I
PP
C – Ca pacit a nce (p F)
Test w ave form
parameters
tr =
10
µ
sec.
t p = 1000 µsec.
RF01001, Rev. A (1/4/13) ©2013 Microsemi Corporation Page 6 of 7
MSMCG5.0A – MXLSMCG170CAe3,
MSMCJ5.0 – MXLSMCJ170CAe3
PACKAGE DIM ENSIONS
NOTES: Dimension “E” exceeds the JEDEC outline as shown.
Typical Standoff Height: 0.004” – 0.008” (0.1 mm – 0. 2 mm ).
NOTES: Dimension “E” e xceed s the JE DE C out line in he i ght as sh own.
Typical Standoff Height: 0.004” – 0.008” (0.1 mm – 0. 2 mm ).
Dimensions
Ltr
Inch
Millimeters
Min
Max
Min
Max
A
.115
.121
2.92
3.07
B
.260
.280
6.60
7.11
C
.220
.245
5.59
6.22
E
.077
.110
1.95
2.80
F
.380
.400
9.65
10.16
K
.025
.040
0.635
1.016
Dimensions
Ltr
Inch
Millimeters
Min
Max
Min
Max
A
.115
.121
2.92
3.07
B
.260
.280
6.60
7.11
C
.220
.245
5.59
6.22
D
.305
.320
7.75
8.13
E
.077
.110
1.95
2.80
L
.030
.060
.760
1.52
SMCG (DO-215AB)
SMCJ (DO-214AB)
RF01001, Rev. A (1/4/13) ©2013 Microsemi Corporation Page 7 of 7
MSMCG5.0A – MXLSMCG170CAe3,
MSMCJ5.0 – MXLSMCJ170CAe3
PAD LAYOUT
SMCG (DO-215AB)
Ltr
Inch
Millimeters
A
.510
12.95
B
.110
2.79
C
.150
3.81
SMCJ (DO-214AB)
Ltr
Inch
Millimeters
A
.390
9.90
B
.110
2.79
C
.150
3.81
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Microsemi:
MSMCG8.0A MSMCG70CA MXLSMCG75CA MASMCG58CAe3 MXSMCJ70Ae3 MXLSMCG70CAe3
MXLSMCJ120A MSMCG18CA MASMCJ78A MASMCG10Ae3 MXSMCG45CAe3 MASMCJ60Ae3 MSMCG33A
MASMCJ130CAe3 MXSMCJ90CA MSMCG33CAe3 MASMCJ13Ae3 MASMCJ51CAe3 MXLSMCG30A
MXSMCG48A MSMCJ150CA MXSMCJ7.5Ae3 MSMCG8.0Ae3 MXSMCG78Ae3 MXSMCG70Ae3 MASMCJ26Ae3
MASMCG78CAe3 MXSMCJ13CAe3 MSMCG8.0CA MASMCG14CA MASMCG28Ae3 MSMCJ11A MXSMCJ6.0Ae3
MXLSMCJ78CAe3 MSMCG100CA MXLSMCJ7.5A MSMCG45A MASMCJ24A MASMCJ45CA MSMCJ26Ae3
MASMCG75CAe3 MXSMCJ26Ae3 MASMCG110CA MXLSMCJ9.0Ae3 MASMCJ60CAe3 MASMCJ90A
MXSMCJ45CA MASMCG17CAe3 MASMCG16Ae3 MXSMCJ40Ae3 MSMCG6.0CAe3 MASMCJ100CAe3
MXLSMCJ51CAe3 MXLSMCG8.5Ae3 MXLSMCG30CAe3 MSMCJ160CA MXSMCJ20CA MXLSMCG150Ae3
MSMCG11A MASMCJ58A MSMCJ6.5A MXLSMCJ85CAe3 MASMCJ13A MXSMCG30Ae3 MXLSMCG54A
MXLSMCG7.5Ae3 MXSMCG11A MXLSMCJ8.5CAe3 MXSMCG120CAe3 MXSMCG18Ae3 MXSMCJ24CA
MXSMCG10Ae3 MSMCJ58Ae3 MXSMCJ9.0CAe3 MSMCJ130CAe3 MXSMCJ30Ae3 MXLSMCJ110CAe3
MSMCG160CAe3 MSMCJ17CA MXLSMCJ110CA MASMCG51Ae3 MXLSMCJ9.0A MSMCJ43A MXSMCJ75Ae3
MXSMCG6.5CAe3 MASMCJ10Ae3 MXSMCG17A MASMCJ54A MXSMCG28CA MASMCJ6.5A MASMCJ6.0Ae3
MASMCJ45A MSMCJ26CA MXSMCJ75CA MSMCG7.5A MSMCG45CA MXLSMCG16CAe3 MXSMCJ160A
MXSMCG160Ae3 MXLSMCG75Ae3
