Cree(R) XLamp(R) XHP35.2 LEDs Product Description FEATURES Table of Contents The XLamp(R) XHP35.2 LED is the next * Available in 5-step EasyWhite(R) bins Characteristics...............................................2 generation of Extreme High Power LEDs at 2700K to 5700K CCT and 3-step Flux Characteristics, EasyWhite(R) Order available in the XP footprint. Built on EasyWhite bins at 2700K to 3500K Codes and Bins..............................................3 Cree's latest highpower LED technology, CCT Flux Characteristics, ANSI White Order the XHP35.2 LED improves the voltage characteristics, efficacy and reliability of * Available in ANSI white bins at 2700K to 7000K CCT Codes and Bins..............................................5 Relative Spectral Power Distribution............8 the XHP35 LED in the same 3.45 mm x * Available in standard, 70-, 80-, 85- Relative Flux vs. Junction Temperature........8 3.45mm footprint. The new XHP35.2 LED and 90minimum CRI options Electrical Characteristics...............................9 provides an easy dropin upgrade so that * Binned at 85C Relative Flux vs. Current................................9 lighting manufacturers can achieve higher * Maximum drive current: 1050mA Relative Chromaticity vs. Current............... 10 system LPW on existing XHP35 designs * Low thermal resistance: 1.8C/W Relative Chromaticity vs. Temperature...... 10 with minimal system redesign cost. * Wide viewing angle: 135 Typical Spatial Distribution......................... 11 * Unlimited floor life at Thermal Design........................................... 11 30C/85% RH * Reflow solderable - JEDEC JSTD020C Performance Groups - Luminous Flux..... 12 Performance Groups - Chromaticity......... 12 Cree's EasyWhite(R) Chromaticity Regions * RoHS compliant Plotted on the 1931 CIE Curve................... 16 * UL recognized component Cree's Standard Cool White Kits Plotted (R) (E349212) CLD-DS199 Rev 0A Product family data sheet on ANSI Standard Chromaticity Regions... 19 Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions................................. 20 Bin and Order Code Formats...................... 21 Reflow Soldering Characteristics............... 22 Notes........................................................... 23 Mechanical Dimensions............................. 24 www.cree.com/Xlamp Tape and Reel.............................................. 25 Packaging.................................................... 26 Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp (R) XHP35.2 LED Characteristics Characteristics Unit Thermal resistance, junction to solder point C/W 1.8 degrees 135 mV/C -5.6 Viewing angle (FWHM) Temperature coefficient of voltage ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical Maximum V 8000 mA 1050 Reverse voltage V -5 Forward voltage (@ 350mA, 85C) V LED junction temperature C DC forward current 11.2 11.9 150 Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 2 XLamp (R) XHP35.2 LED Flux Characteristics, EasyWhite(R) Order Codes and Bins (TJ = 85C) The following table provides order codes for XLamp XHP35.2 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 21). Nominal CCT Min 70 5700K 80 90 70 5000K 80 90 70 4500K 80 90 70 4000K Minimum Luminous Flux @350mA CRI 80 90 Typ Group Flux (lm) @ 85C E2 590 D4 550 D4 550 D2 510 C4 475 C2 440 B4 410 E2 590 D4 550 D4 550 D2 510 C4 475 C2 440 B4 410 E2 590 D4 550 3-Step Group Order Code 5-Step Group 57E 57E Order Code XHP35B-00-0000-0D0BE257E XHP35B-00-0000-0D0BD457E XHP35B-00-0000-0D0HD457E XHP35B-00-0000-0D0HD257E XHP35B-00-0000-0D0UC457E 57E XHP35B-00-0000-0D0UC257E XHP35B-00-0000-0D0UB457E 57E 50E XHP35B-00-0000-0D0BE250E XHP35B-00-0000-0D0BD450E XHP35B-00-0000-0D0HD450E XHP35B-00-0000-0D0HD250E XHP35B-00-0000-0D0UC450E 50E XHP35B-00-0000-0D0UC250E XHP35B-00-0000-0D0UB450E 45E XHP35B-00-0000-0D0BE245E XHP35B-00-0000-0D0BD445E D4 550 D2 510 C4 475 C2 440 B4 410 XHP35B-00-0000-0D0UB445E E2 590 XHP35B-00-0000-0D0BE240E D4 550 D2 510 D4 550 D2 510 C2 440 B4 410 45E XHP35B-00-0000-0D0HD445E XHP35B-00-0000-0D0HD245E XHP35B-00-0000-0D0UC445E 45E 40E XHP35B-00-0000-0D0UC245E XHP35B-00-0000-0D0BD440E XHP35B-00-0000-0D0BD240E 40E 40E XHP35B-00-0000-0D0HD440E XHP35B-00-0000-0D0HD240E XHP35B-00-0000-0D0UC240E XHP35B-00-0000-0D0UB440E Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 23). * Cree XLamp XHP35.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 3 XLamp (R) XHP35.2 LED Flux Characteristics, EasyWhite(R) Order Codes and Bins (TJ = 85C) - Continued Nominal CCT Min 70 3500K 80 90 70 3000K Minimum Luminous Flux @350mA CRI 80 90 80 2700K 90 Typ 3-Step 5-Step Group Flux (lm) @ 85C E2 590 D4 550 D2 510 XHP35B-00-0000-0D0BD235E D4 550 XHP35B-00-0000-0D0HD435E D2 510 C4 475 C2 440 B4 410 D4 550 D2 510 D2 510 C4 475 C2 440 B4 410 B2 380 C4 475 C2 440 B4 410 B2 380 Group Order Code Group Order Code XHP35B-00-0000-0D0BE235E 35E 35E XHP35B-00-0000-0D0BD435E XHP35B-00-0000-0D0HD235E XHP35B-00-0000-0D0HC435E 35G XHP35B-00-0000-0D0UC235G XHP35B-00-0000-0D0UB435G 35E 30E 30E XHP35B-00-0000-0D0UC230G 30G XHP35B-00-0000-0D0UB430G 30E XHP35B-00-0000-0D0UB227G XHP35B-00-0000-0D0BD430E XHP35B-00-0000-0D0BD230E XHP35B-00-0000-0D0HD230E XHP35B-00-0000-0D0HC430E XHP35B-00-0000-0D0UB430E XHP35B-00-0000-0D0UB230E 27E XHP35B-00-0000-0D0UB427G XHP35B-00-0000-0D0UB435E XHP35B-00-0000-0D0UC230E XHP35B-00-0000-0D0UB230G 27G XHP35B-00-0000-0D0UC235E 27E XHP35B-00-0000-0D0HC427E XHP35B-00-0000-0D0HC227E XHP35B-00-0000-0D0UB427E XHP35B-00-0000-0D0UB227E Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 23). * Cree XLamp XHP35.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 4 XLamp (R) XHP35.2 LED Flux Characteristics, ANSI White Order Codes and Bins (TJ = 85C) The following table provides order codes for XLamp XHP35.2 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 21). Nomimal CCT 7000K Minimum Luminous Flux @ 350mA CRI Chromaticity Regions 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U Min Typ 0 68 70 80 90 0 68 70 6500K 1A, 1B, 1C, 1D 80 90 0 6000K 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U 70 80 90 68 Group Flux (lm) @ 85C Order Code E2 590 XHP35B-00-0000-0D00E20DT D4 550 XHP35B-00-0000-0D00D40DT E2 590 XHP35B-00-0000-0D0BE20DT D4 550 XHP35B-00-0000-0D0BD40DT D4 550 XHP35B-00-0000-0D0HD40DT D2 510 XHP35B-00-0000-0D0HD20DT C4 475 XHP35B-00-0000-0D0UC40DT C2 440 XHP35B-00-0000-0D0UC20DT B4 410 XHP35B-00-0000-0D0UB40DT E2 590 XHP35B-00-0000-0D00E20E1 D4 550 XHP35B-00-0000-0D00D40E1 E2 590 XHP35B-00-0000-0D0BE20E1 D4 550 XHP35B-00-0000-0D0BD40E1 D4 550 XHP35B-00-0000-0D0HD40E1 D2 510 XHP35B-00-0000-0D0HD20E1 C4 475 XHP35B-00-0000-0D0UC40E1 C2 440 XHP35B-00-0000-0D0UC20E1 B4 410 XHP35B-00-0000-0D0UB40E1 E2 590 XHP35B-00-0000-0D00E20DV D4 550 XHP35B-00-0000-0D00D40DV E2 590 XHP35B-00-0000-0D0BE20DV D4 550 XHP35B-00-0000-0D0BD40DV D4 550 XHP35B-00-0000-0D0HD40DV D2 510 XHP35B-00-0000-0D0HD20DV C4 475 XHP35B-00-0000-0D0UC40DV C2 440 XHP35B-00-0000-0D0UC20DV B4 410 XHP35B-00-0000-0D0UB40DV Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 23). * Cree XLamp XHP35.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 5 XLamp (R) XHP35.2 LED Flux Characteristics, ANSI Order Codes and Bins (TJ = 85C) - Continued Nomimal CCT Minimum Luminous Flux @ 350mA CRI Chromaticity Regions Min Typ 0 68 70 5700K 2A, 2B, 2C, 2D 80 90 0 68 70 5000K 3A, 3B, 3C, 3D 80 90 0 70 4500K 4A, 4B, 4C, 4D 80 90 68 Order Code Group Flux (lm) @ 85C E2 590 XHP35B-00-0000-0D00E20E2 D4 550 XHP35B-00-0000-0D00D40E2 E2 590 XHP35B-00-0000-0D0BE20E2 D4 550 XHP35B-00-0000-0D0BD40E2 D4 550 XHP35B-00-0000-0D0HD40E2 D2 510 XHP35B-00-0000-0D0HD20E2 C4 475 XHP35B-00-0000-0D0UC40E2 C2 440 XHP35B-00-0000-0D0UC20E2 B4 410 XHP35B-00-0000-0D0UB40E2 E2 590 XHP35B-00-0000-0D00E20E3 D4 550 XHP35B-00-0000-0D00D40E3 E2 590 XHP35B-00-0000-0D0BE20E3 D4 550 XHP35B-00-0000-0D0BD40E3 D4 550 XHP35B-00-0000-0D0HD40E3 D2 510 XHP35B-00-0000-0D0HD20E3 C4 475 XHP35B-00-0000-0D0UC40E3 C2 440 XHP35B-00-0000-0D0UC20E3 B4 410 XHP35B-00-0000-0D0UB40E3 E2 590 XHP35B-00-0000-0D00E20E4 D4 550 XHP35B-00-0000-0D00D40E4 E2 590 XHP35B-00-0000-0D0BE20E4 D4 550 XHP35B-00-0000-0D0BD40E4 D4 550 XHP35B-00-0000-0D0HD40E4 D2 510 XHP35B-00-0000-0D0HD20E4 C4 475 XHP35B-00-0000-0D0UC40E4 C2 440 XHP35B-00-0000-0D0UC20E4 B4 410 XHP35B-00-0000-0D0UB40E4 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 23). * Cree XLamp XHP35.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 6 XLamp (R) XHP35.2 LED Flux Characteristics, ANSI Order Codes and Bins (TJ = 85C) - Continued Nomimal CCT Chromaticity Regions Min 0 4000K 5A, 5B, 5C, 5D 70 80 90 70 3500K 6A, 6B, 6C, 6D 80 90 70 3000K 7A, 7B, 7C, 7D 80 90 80 2700K Minimum Luminous Flux @ 350mA CRI 8A, 8B, 8C, 8D 90 Typ 68 Order Code Group Flux (lm) @ 85C E2 590 XHP35B-00-0000-0D00E20E5 D4 550 XHP35B-00-0000-0D00D40E5 D2 510 XHP35B-00-0000-0D00D20E5 E2 590 XHP35B-00-0000-0D0BE20E5 D4 550 XHP35B-00-0000-0D0BD40E5 D2 510 XHP35B-00-0000-0D0BD20E5 D4 550 XHP35B-00-0000-0D0HD40E5 D2 510 XHP35B-00-0000-0D0HD20E5 C2 440 XHP35B-00-0000-0D0UC20E5 B4 410 XHP35B-00-0000-0D0UB40E5 E2 590 XHP35B-00-0000-0D0BE20E6 D4 550 XHP35B-00-0000-0D0BD40E6 D2 510 XHP35B-00-0000-0D0BD20E6 D4 550 XHP35B-00-0000-0D0HD40E6 D2 510 XHP35B-00-0000-0D0HD20E6 C4 475 XHP35B-00-0000-0D0HC40E6 C2 440 XHP35B-00-0000-0D0UC20E6 B4 410 XHP35B-00-0000-0D0UB40E6 D4 550 XHP35B-00-0000-0D0BD40E7 D2 510 XHP35B-00-0000-0D0BD20E7 D2 510 XHP35B-00-0000-0D0HD20E7 C4 475 XHP35B-00-0000-0D0HC40E7 C2 440 XHP35B-00-0000-0D0UC20E7 B4 410 XHP35B-00-0000-0D0UB40E7 B2 380 XHP35B-00-0000-0D0UB20E7 C4 475 XHP35B-00-0000-0D0HC40E8 C2 440 XHP35B-00-0000-0D0HC20E8 B4 410 XHP35B-00-0000-0D0UB40E8 B2 380 XHP35B-00-0000-0D0UB20E8 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 23). * Cree XLamp XHP35.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 7 XLamp (R) XHP35.2 LED Relative Spectral Power Relative Spectral Power Distribution Relative Radiant Power 100% 80% 60% 6000 K, 70 CRI 5000 K, 70 CRI 40% 3000 K, 80 CRI 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (IF = 350mA) 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 8 XLamp (R) XHP35.2 LED Electrical Characteristics (Tj = 85C) Electrical Characteristics (TJ = 85C) 1050 Forward Current (mA) 875 700 525 350 175 0 9.8 10.0 10.2 10.4 10.6 10.8 11.0 11.2 11.4 11.6 11.8 12.0 12.2 Forward Voltage (V) Relative Intensity vs. Current (Tj = 85C) Relative Flux vs. Current (TJ = 85C) 250% 225% Relative Luminous Flux 200% 175% 150% 125% 100% 75% 50% 25% 0% 0 175 350 525 700 875 1050 Forward Current (mA) Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 9 XLamp (R) XHP35.2 LED Relative Chromaticity Vs. Current, (Warm WW Relative Chromaticity vs. Current White) 0.020 0.016 0.012 0.008 0.004 CCx 0.000 CCy -0.004 -0.008 -0.012 -0.016 -0.020 0 175 350 525 700 875 1050 Current (mA) Relative Chromaticity vs. Temperature (Warm White) Relative Chromaticity Vs. Temperature WW 0.020 0.016 0.012 0.008 0.004 CCx 0.000 CCy -0.004 -0.008 -0.012 -0.016 -0.020 25 50 75 100 125 150 Tsp (C) Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 10 XLamp (R) XHP35.2 LED Typical Spatial Radiation Pattern Typical Spatial Distribution 100% Relative Luminous Intensity 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle () Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life Thermal and optical characteristics. Design 1200 Maximum Current (mA) 1000 800 600 400 Rj-a = 2C/W Rj-a = 4C/W 200 0 Rj-a = 6C/W Rj-a = 8C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (C) XHP35 High Intensity Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 11 XLamp (R) XHP35.2 LED Performance Groups - Luminous Flux (TJ=85C) XLamp XHP35.2 LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. Group Code Minimum Luminous Flux Maximum Luminous Flux A2 330 355 A4 355 380 B2 380 410 B4 410 440 C2 440 475 C4 475 510 D2 510 550 D4 550 590 E2 590 635 E4 635 680 Performance Groups - Chromaticity XLamp XHP35.2 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures - 3-Step Ellipse Major Axis Minor Axis x y a b Rotation Angle () 3500K 0.4073 0.3917 0.00927 0.00414 54.0 30G 3000K 0.4338 0.4030 0.00834 0.00408 53.2 27G 2700K 0.4577 0.4099 0.00834 0.00420 48.5 Major Axis Minor Axis a b Rotation Angle () Bin Code CCT 35G Center Point EasyWhite Color Temperatures - 5-Step Ellipse Bin Code CCT Center Point x y 57E 5700K 0.3287 0.3417 0.01230 0.00600 72.0 50E 5000K 0.3447 0.3553 0.01400 0.00520 65.0 61.5 45E 4500K 0.3611 0.3658 0.01420 0.00550 40E 4000K 0.3818 0.3797 0.01565 0.00670 53.7 35E 3500K 0.4073 0.3917 0.01545 0.00690 54.0 30E 3000K 0.4338 0.4030 0.01390 0.00680 53.2 27E 2700K 0.4577 0.4099 0.01350 0.00700 48.5 Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 12 XLamp (R) XHP35.2 LED Performance Groups - Chromaticity (Continued) ANSI White Bins CCT Bin Code 0A0 0B0 7000 K 0C0 0D0 ANSI White Bins x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.3042 0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.2984 0.3133 0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 CCT 0R0 0S0 7000 K 0T0 Bin Code 1A0 1B0 6500 K 1C0 1D0 x y 0.2980 0.2880 0.2950 0.2970 0.3009 0.3042 0.3037 0.2937 0.2895 0.3135 0.2870 0.3210 0.2937 0.3312 0.2962 0.3220 0.2962 0.3220 0.2937 0.3312 0.3005 0.3415 0.3048 0.3207 0.3028 0.3304 0.2984 0.3133 0.3037 0.2937 0.3048 0.3207 0.3009 0.3042 0.3068 0.3113 0.3068 0.3113 0.3009 0.3042 0.3093 0.2993 0U0 ANSI White Bins CCT Bin Code ANSI White Bins x y 0.3048 0.3130 0.3144 0.3186 CCT Bin Code x y 0.3207 0.3068 0.3113 0.3290 0.3144 0.3186 0.3161 0.3059 1R0 0.3068 0.3113 0.3093 0.2993 0.3028 0.3304 0.3005 0.3415 0.3115 0.3391 0.3099 0.3509 0.3130 0.3290 0.3115 0.3391 0.3048 0.3207 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373 0.3130 1S0 0.3028 0.3304 0.3099 0.3509 0.3196 0.3602 0.3205 0.3481 0.3290 0.3115 0.3391 0.3130 0.3290 0.3144 0.3186 0.3213 0.3373 0.3221 0.3261 0.3221 0.3261 0.3231 0.3120 0.3144 0.3186 0.3161 0.3059 6500 K 1T0 1U0 Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 13 XLamp (R) XHP35.2 LED Performance Groups - Chromaticity (Continued) ANSI White Bins CCT Bin Code 2A0 2B0 5700 K 2C0 2D0 ANSI White Bins x y 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3222 0.3243 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3215 0.3350 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 CCT 2R0 2S0 5700 K 2T0 Bin Code 3A0 3B0 5000 K 3C0 3D0 x y 0.3222 0.3243 0.3290 0.3300 0.3290 0.3180 0.3231 0.3120 0.3196 0.3602 0.3290 0.3690 0.3290 0.3538 0.3207 0.3462 0.3290 0.3690 0.3381 0.3762 0.3376 0.3616 0.3290 0.3417 0.3290 0.3538 0.3290 0.3417 0.3290 0.3300 0.3371 0.3490 0.3366 0.3369 0.3366 0.3369 0.3361 0.3245 0.3290 0.3300 0.3290 0.3180 2U0 ANSI White Bins CCT Bin Code ANSI White Bins x y 0.3371 0.3451 0.3440 0.3427 CCT Bin Code x y 0.3490 0.3530 0.3597 0.3554 0.3615 0.3659 0.3512 0.3465 4A0 0.3366 0.3369 0.3515 0.3487 0.3376 0.3616 0.3548 0.3736 0.3463 0.3687 0.3641 0.3804 0.3451 0.3554 0.3530 0.3597 0.3371 0.3490 0.3533 0.3620 0.3463 0.3687 0.3641 0.3804 0.3551 0.3760 0.3736 0.3874 0.3533 0.3620 0.3702 0.3722 0.3451 0.3554 0.3615 0.3659 0.3451 0.3554 0.3615 0.3659 0.3533 0.3620 0.3702 0.3722 0.3515 0.3487 0.3670 0.3578 0.3440 0.3427 0.3590 0.3521 4B0 4500 K 4C0 4D0 Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 14 XLamp (R) XHP35.2 LED Performance Groups - Chromaticity (Continued) ANSI White Bins CCT Bin Code 5A0 5B0 4000 K 5C0 5D0 ANSI White Bins x y 0.3670 0.3578 CCT 0.3702 0.3722 0.3825 0.3798 0.3783 .3646 0.4017 0.3751 0.3702 0.3722 0.3941 0.3848 0.3736 0.3874 0.3996 0.4015 0.3869 0.3958 .04146 0.4089 0.3825 0.3798 .04080 0.3916 0.3825 0.3798 0.4080 0.3916 0.3869 0.3958 0.4146 0.4089 .04006 0.4044 0.4299 0.4165 6A0 6B0 3500 K 6C0 Bin Code 7A0 7B0 3000 K 7C0 7D0 x y 0.3889 0.3690 0.3941 0.3848 0.4080 0.3916 0.3950 0.3875 0.4221 0.3984 0.3783 0.3646 0.4017 0.3751 0.3825 0.3798 0.4080 0.3916 0.3950 0.3875 0.4221 0.3984 0.3898 0.3716 0.4147 0.3814 6D0 ANSI White Bins CCT Bin Code ANSI White Bins x y 0.4147 0.4221 0.4342 0.4028 CCT Bin Code x y 0.3814 0.4373 0.3893 0.3984 0.4465 0.4071 0.4582 0.4099 8A0 0.4259 0.3853 0.4483 0.3919 0.4221 0.3984 0.4465 .04071 0.4299 0.4165 0.4562 0.4260 0.4430 0.4212 0.4687 0.4289 0.4342 .04028 .04582 0.4099 0.4342 0.4028 0.4582 0.4099 0.4430 0.4212 0.4687 0.4289 0.4562 0.4260 0.4813 0.4319 0.4465 0.4071 0.4700 0.4126 0.4259 0.3853 0.4483 0.3919 0.4342 0.4028 0.4582 0.4099 0.4465 0.4071 0.4700 0.4126 0.4373 0.3893 0.4593 0.3944 8B0 2700 K 8C0 8D0 Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 15 XLamp (R) XHP35.2 LED Cree's EasyWhite(R) Chromaticity Regions Plotted on the 1931 CIE Curve ANSI Cool White 0.40 5000 K 0.39 5700 K 0.38 0.37 6500 K 2T 0.36 2S CCy 8000 K 2B 1S 0.34 0T 0.33 0S 0.32 2C 1T 0.35 0B 0.31 1D 2U 2R 1A 0D 0A 0.30 2A 1B 0C 2D 1C ANSI C78.377A 1U 1R 0U 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 16 XLamp (R) XHP35.2 LED Cree's EasyWhite(R) Chromaticity Regions Plotted on the 1931 CIE Curve - Continued ANSI Neutral White and ANSI Warm White 0.45 0.44 2700 K 3000 K 0.43 0.42 3500 K 4000 K CCy 0.40 6C 4500 K 6B 5C 0.39 0.37 5700 K 0.36 3C 3B 3D 0.35 4C 4B 7D 7A 8A 8C 8D 6D 5B 5000 K 0.38 7C 7B 0.41 8B 5D 6A 5A 4D 4A 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.33 CCx Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 17 XLamp (R) XHP35.2 LED Cree's EasyWhite(R) Chromaticity Regions Plotted on the 1931 CIE Curve - Continued 0.44 ANSI C78.377 Quadrangle 0.43 2700 K 3000 K EasyWhite 5-Step 0.42 3500 K EasyWhite 3-Step 0.41 4000 K 0.40 4500 K 0.39 5000 K 0.38 CCy 0.37 5700 K 0.36 6500 K 0.35 0.34 8000 K 0.33 0.32 0.31 0.30 0.29 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.28 CCx Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 18 XLamp (R) XHP35.2 LED Cree's Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000 K 0.39 0.38 0.38 5700 K 5700 K DV 0.37 0.37 6500 K 6500 K 2T 0.36 0.36 2S DT 0.34 1D ANSI C78.377A 1U 0D 0A 0.31 1R 0C 0B 1D 0A ANSI C78.377A 1R 0U 0.36 0.35 0.30 0.29 0.28 0.36 0.35 0.34 0.33 0.32 0.31 0.28 0.30 0.28 0.34 0R 0.29 CCx CCx 0.40 0.40 5000 K 0.39 0.38 0.38 3S 6500 K 0.35 1T 0T 0.33 0S 0.32 0C 0.31 3R 2A 1D 0T 0S 1R 0C 0A 3R 2A 2U 1D ANSI C78.377A 2R 1A 0D 2D 1C 1B 0B 3A 2B 1S 0.31 1U 1R 0U 0.30 0U 0.30 8000 K 0.34 0.32 ANSI C78.377A 2R 1U 2C 1T 0.33 2U 1A 0D 0A 2D 1C 1B 0B 3A 2B 1S 3B 2S 0.35 2C 3S 2T 0.36 3B 2S 8000 K 0.34 6500 K 2T E1 5700 K E2 0.37 CCy 0.36 5000 K 0.39 5700 K 0.37 0R 0R 0.29 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 CCx 0.29 0.28 0.28 0.28 CCy 2U 2R 1U 0D 0R 0.29 2A 1A 0.30 0.29 0.28 2D 1C 1B 0S 0.32 0U 0.30 1S 0T 0.33 2U 2R 1A 0.34 2B 0.33 0.31 2A 1B 0C 0B 2D 1C 2C 1T 8000 K 0.32 0S 0.32 0.35 2B 1S 0T 0.33 2C 1T 2T 2S 0.31 8000 K CCy 0.35 CCy 5000 K 0.39 CCx Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 19 XLamp (R) XHP35.2 LED Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.45 0.44 E7 0.42 3500 K 4000 K 0.40 0.39 5000 K 0.38 4500 K E4 4B 3C 0.36 3B 3D 0.35 2700 K 8C 7B 6C 6B 8A 7D 7A 5C 8D 6D 5B 4C E3 0.37 E5 8B 7C E6 0.41 CCy E8 3000 K 0.43 6A ANSI C78.377A 5D 5A 4D 4A 3A 0.34 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.33 CCx Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 20 XLamp (R) XHP35.2 LED Bin and Order Code Formats Bin codes and order codes for XHP35.2 LEDs are configured in the following manner: Order Code SSSSSS-BD-GGGG-HJKLMMNNN Bin Code Series XHP35B = XHP35.2 Series XHP35B = XHP35.2 Internal code Chromaticity group Minimum luminous flux group Luminous flux group Chromaticity group Voltage performance group CRI specification 0 = No minimum CRI B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum CRI specification 0 = No minimum CRI B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Vf class Configuration B: Version 0 = Default D: Reel size SSSSSS-B-NNN-MMM-JK-L-PP Internal code Vf class Version 0 = Default Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 21 XLamp (R) XHP35.2 LED Reflow Soldering Characteristics In testing, Cree has found XLamp XHP35.2 LEDs to be compatible with JEDEC JSTD020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer's responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) IPC/JEDEC J-STD-020C Time Lead-Free Solder 1.2C/second Preheat: Temperature Min (Tsmin) 120 C Preheat: Temperature Max (Tsmax) 170 C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 C Time Within 5C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 C/second Time 25C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 22 XLamp (R) XHP35.2 LED Notes Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XHP35.2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 C/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. UL(R) Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 23 XLamp (R) XHP35.2 LED Mechanical Dimensions Thermal vias, if present, are not shown on these drawings. All dimensions are .13mm unless otherwise indicated. 3.30 3.30 .50 .50 2.30 3.30 2.30 .50 2.30 3.30 .50 3.45 3.45 3.45 2.65 3.45 3.45 OPTICAL OPTICAL REFERENCE REFERENCE OPTICAL REFERENCE OPTICAL REFERENCE 3.45 3.45 .50 .56 3.50 .30 3.50 .30 3.50 .30 .30 .30 R1.85 R1.85 3.50 3.50 1.30 Bottom View Side View .56 .56 .56 .83 3.50 .83 3.30 .18 3.30 3.30 3.30 3.30.09 3.30 1.50 1.50 .70 .70 .70 1.50 Recommended Copper Layout 1.30 .50 1.30 1.30 .50 .50 1.30 Recommended Solder Pad (Solder Resist Pattern) .18 .29 .18 .18 .29 .56.29 .56 .56 .18 .18 .09 .43 .18 .43 .29 .43 .18 .09.18 .70 .56 .43 .56 .83 .83 3.30 .50 .56 .56 .56 3.30 3.50 1.30 1.30 1.30 3.30 3.30 REFERENCE OPTICAL 3.30 .50 .50 3.30.50 .50 .50 .50 .50 .50 .30 1.50 3.30 3 3.30 R1.85 OPTICAL REFERENCE OPTICAL REFERENCE OPTICAL REFERENCE Top View .30 .50 .56 Anode Side R1.85 3.50 .50 .50 .56 3.30 3.45 .30 2.30 2.65 2.65 .56 2.65 .56 .09 .18 .50 .18 .50 .18 3.30 .50 .50 .50 .18 .50 3.30 .50 3.30 .50 .18 .18 .18 3.30 Recommended Stencil Openings* Notes: * Cree recommends using thermal pad kickouts to maximize component thermal performance. * Cree recommends using white solder mask material to minimize system optical loss. * This stencil has been tested and optimized for the avoidance of voiding when using ALPHA(R) LUMET(R) P30 Maxrel solder paste. For other solder pastes, a "window pane" design for the thermal pad stencil may result in a lower voiding percentage. Contact your local Cree Field Applications Engineer for consultation regarding your specific application. Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 24 A XLamp (R) XHP35.2 LED B 6 5 Tape and Reel NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 66 A 4 3 All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. 55 44 NOTICE NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND 6 CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT NOTICE MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION D UNAUTHORIZED UNAUTHORIZED PERSONWITHOUT WITHOUT THE THE WRITTEN CONSENT PERSON WRITTEN CONSENT CONTAINED WITHIN ARE THE PROPRIETARY AND OF CREE INC. OF CREE INC. CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT 2.00 [.079] P2 DD 4.00 [.157] 2.00 [.079] [.079] 2.00 Po P2 P2 MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 4.00 [.157] [.157] 4.00 Po Po 1.75 [.069] [.069] 1.75 E1 E1 1.75 [.069] E1 CATHODE SIDE C O1.50 5.50 [.217]F 5.50 [.217]F [.059] D1 MIN O1.50 O1.50 [.059] [.059] D1 D1 MIN MIN C CC ANODE SIDE 8.00 [.315] P ANODESIDE SIDE ANODE 8.00 [.315] P 3.0 A END 3.60 [.142] Ao Bo - NOMINAL NOMINAL W 10.25 10.25 [.404] [.404] E2 E2 12.00 [.472] NOMINAL 12.30[.484] [.484] 12.30 O1.50 MAX MAX [.059] W D1 W 10.25 [.404] E2 C 3.60 [.142] [.142] 3.60 3.0 Bo Bo 3.0 3.0 12.30 [.484] 3.60 mm [.142"] Bo 3.60 [.142] Bo C CC 12.30 [.484] MAX W MIN .30 [.012] T 3.00 [.118] Ko 8.0.1 .30 [.012] T .30 [.012] [.012] .30 TT 2.5.1 1.5.1 3.00 [.118] Ko B B Cathode Side BB Anode Side (denoted by + UNLESS andOTHERWISE circle) SPECIFIED DRAWN BY DATE UNLESS OTHERWISE SPECIFIED D. CRONIN 5/16/14 ARE IN DIMENSIONS DIMENSIONS ARE IN MILLIMETERS CHECK DATE AND AFTER FINISH. MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED: .XX .25 .XX .25 DATE APPROVED .XXX .125 TITLE .XXX .125 X .5 ANGLE X THIRD .5 PROJECTION User Feed Direction User Feed Direction END THIRD ANGLE PROJECTION 6 66 [.142] 3.00 mm [.118"] 3.00 mm Ko3.60 -[.118"] 3.00 mm [.118"] 3.0 12.00 [.472] 12.00 [.472] MAX 5.50 [.217]F AA 6 Ko-Ko 3.0 3.0 A 3.60 [.142] [.142] 3.60 Ao Ao 10.25 [.404] E2 3.00 [.118] [.118] 3.00 3.0 Ko Ko BB 3.60 [.142] Ao 3.60mm mm[.142"] [.142"] 3.60 3.00 mm Ao -[.118"] 3.60 mm [.142"] 3.60mm mm[.142"] [.142"] 3.60 ANODE SIDE 8.00 [.315] [.315] 8.00 4.0.1 PP 1.75.10 +.3 12.0 .0 Ao-Ao Ko Bo-Bo 12.00 [.472] NOMINAL 5.50 [.217]F B Ao 3.60 SECTION A-A mm [.142"] SCALE POCKET 2POCKET :1 SIZE Bo 3.60 mmSIZE [.142"] POCKET SIZE O1.50 +.10 -.00 SCALE 2 : 1 CATHODESIDE SIDE CATHODE B 3 O1.50 +.10 -.00 4.00 [.157] Po POCKET SIZE Except as noted, all dimensions in mm [inches] 4 1.75 [.069] O1.50 O1.50 E1 +.10 +.10 -.00DETAIL B -.00 2.00 [.079] CATHODE P2 SIDE D 33 5 5 5 4 Trailer Trailer 160mm (min) of 160 mm (min.) 55 emptyof pockets empty pockets sealed with tape sealed with tape (20 pockets min.) (20 pockets min.) 4 3 THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION Loaded Pockets Loaded Pockets (1,000 Lamps) (500 Lamps) 44 33 MATERIAL DRAWN DRAWN BYBY FOR SHEET METAL PARTS ONLY UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE SPECIFIED .X ARE IN 1.5 DIMENSIONS DIMENSIONS ARE IN .XX .75 MILLIMETERS AND AFTER FINISH. MILLIMETERS AND .XXX AFTER FINISH. .25 TOLERANCE SPECIFIED: TOLERANCE UNLESS XUNLESS SPECIFIED: .5 .XX .25.25 .XX 1.6 SURFACE FINISH: .XXX .125 .XXX .125 XX .5 .5 FOR SHEET METAL PARTS ONLY FOR SHEET METAL PARTS ONLY .X.X 1.51.5 .XX .75.75 .XX .XXX .25.25 .XXX XX .5 .5 SURFACE FINISH: 1.61.6 SURFACE FINISH: D. CRONIN 5/16/14 DATE APPROVED DATE START FOR SHEET METAL PARTS ONLY DATE DATE .X CRONIN D.D. CRONIN CHECK CHECK FINAL PROTECTIVE FINISH .XX 5/16/14 5/16/14 .XXX DATE DATE X SURFACE FINISH: DATE DATE APPROVED APPROVED 3 MATERIAL MATERIAL DATE DRAWN BY CHECK START 1.5 .75 .25 SIZE .5 1.6 SCALE TITLE TITLE 4600 Silicon Drive Durham, N.C 27703 Phone (919) 313-5300 Fax (919) 313-5558 Fax (919) 313-5558 Carrier Tape, XPL MATERIAL DRAWING NO. FINAL PROTECTIVE FINISH Carrier Tape, XPL C 4600 Silicon Drive 4600 Silicon Drive Durham, N.C 27703 REV. Durham, N.C 27703 2402-00040 SCALE Fax (919) 313-5558 2 1.000 REV. DRAWING NO. Phone (919) 313-5300 Phone (919) 313-5300 2402-00040 Fax 1.000 (919) 313-5558 A SHEET A A TITLE SIZE C 4600 Silicon Drive Durham, N.C 27703 Phone (919) 313-5300 OF SHEET A 1 /1 A A OF 1 /1 1 1 CarrierTape, Tape,XPL XPL Carrier 2 SIZE SIZE Leader CC Leader 400mm (min) of1.000 1.000 400empty mm22(min.) of pockets with emptyatpockets with least 100mm at least 100 mm sealed by tape sealed by tape (50 empty pockets min.) FINAL PROTECTIVE FINISH FINAL PROTECTIVE FINISH SCALE SCALE REV. REV. DRAWING NO. DRAWING NO. 2402-00040 2402-00040 SHEET SHEET AA OFOF 1 1/1/1 11 (50 empty pockets min.) User Feed Direction Cover Tape Pocket Tape 13mm 7" Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 25 XLamp (R) XHP35.2 LED Packaging Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) Copyright (c) 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 26