S-89110ANC-1A1-TFG - Seiko Instruments

S-89110/89120 Series

www.sii-ic.com

MINI ANALOG SERIES

CMOS OPERATIONAL AMPLIFIER

Seiko Instruments Inc. 1

The mini-analog seri es is a gr oup of ICs that incor porate a gen era l purpo s e an alog circ ui t in a small pa c kage.

The S-89110/8912 0 Series is a CMOS type operational am plifier that has a ph ase compensat ion circuit, and operates at a

low voltage with low current consumption. These features make this product the ideal solution for small battery-powered

portable equipm ent.

The S-89110A/891 20A S eries is a sin gle op eratio nal amplifi er (one circ uit).

The S-89110B/891 20B S eries is a du al oper atio nal amp lifi er (t wo circuits).

 Features

• Lower operating voltage th an the conve ntion al gen eral- pur pose:

DD = 1.8 V to 5.5 V

• Low current consumption (per circuit): IDD = 50 μA (S-89110 Series)

DD = 10 μA (S-89120 Series)

• Low input offset voltage: 4.0 mV max.

• No external capacitors req uired for i nternal phas e com pen satio n

• Output full swing

• Lead-free, Sn 100%, halo gen -free*1

*1. Refer to " Product Name Structure" for details.

 Applications

• Mobile phone

• Notebook PC

• Digital camera

• Digital video camera

 Packages

• SC-88A

• SOT-23-5

• SNT-8A

• TMSOP-8

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

S-89110/89120 Series Rev.3.0_00

Seiko Instruments Inc.

 Block Diagram

1. S-89110A/89120A Series single operational amplifier (one circuit)

VDD

VSS

IN(+)

IN(−)

−

OUT

Figure 1

2. S-89110B/89120B Series dual operational amplifier (two circuits)

VDD

VSS

IN1(+)

IN1(−)

−

OUT1

IN2(+)

IN2(−)

−

OUT2

Figure 2

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

Rev.3.0_00 S-89110/89120 Series

Seiko Instruments Inc. 3

 Product Name Structure

Users can select the pr oduct type for the S-891 10/89120 Series. Refer t o "1. Product name" regarding the co ntents

of product name, "2. Packages" regarding the package dr awings and "3. Product name list" regarding the pr oduct

type.

1. Product name

1. 1 SC-88A

S-891 x 0 A NC − xxx TF x

Current consumption (per circuit)

1: IDD = 50 μA

2: IDD = 10 μA

Number of circuits

A: 1

Package name (abbreviation)

NC: SC-88A

Product code (abbreviation)*2

IC direction in ta

e s

ecifications*1

Environmental code

S: Lead-free, halogen-free

G: Lead-free (for details, please contact our sales office)

*1. Refer to the tape drawing.

*2. Refer to "3. Product name list"

1. 2 SOT-23-5

S-891 x 0 A MC − xxx TF U

Current consumption (per circuit)

1: IDD = 50 μA

2: IDD = 10 μA

Number of circuits

A: 1

Package name (abbreviation)

MC: SOT-23-5

Product code (abbreviation)*2

IC direction in ta

e s

ecifications*1

Environmental code

U: Lead-free (Sn 100%), halogen-free

*1. Refer to the tape drawing.

*2. Refer to "3. Product name list"

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

S-89110/89120 Series Rev.3.0_00

Seiko Instruments Inc.

1. 3 SNT-8A

S-891 x 0 B PH − xxx TF x

Number of circuits

B: 2

Current consumption (per circuit)

1: IDD = 50 μA

2: IDD = 10 μA

Package name (abbreviation)

PH: SNT-8A

Product code (abbreviation)*2

IC direction in ta

e s

ecifications*1

Environmental code

U: Lead-free (Sn 100%), halogen-free

G: Lead-free (for details, please contact our sales office)

*1. Refer to the tape drawing.

*2. Refer to "3. Product name list"

1. 4 TMSOP-8

S-891 x 0 B FM − xxx TF U

Current consumption (per circuit)

1: IDD = 50 μA

2: IDD = 10 μA

Number of circuits

B: 2

Package name (abbreviation)

FM: TMSOP-8

Product code (abbreviation)*2

IC direction in ta

e s

ecifications*1

Environmental code

U: Lead-free (Sn 100%), halogen-free

*1. Refer to the tape drawing.

*2. Refer to "3. Product name list"

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

Rev.3.0_00 S-89110/89120 Series

Seiko Instruments Inc. 5

2. Packages Table 1 Package Drawing Codes

Package Name Dimension Tape Reel Land

SC-88A NP005-B-P-SD NP005-B-C-SD NP005-B-R-SD

－

SOT-23-5 MP005-A-P-SD MP005-A-C-SD MP005-A-R-SD

－

SNT-8A PH008-A-P-SD PH008-A-C-SD PH008-A-R-SD PH008-A-L-SD

TMSOP-8 FM008-A-P-SD FM008-A-C-SD FM008-A-R-SD

－

3. Product name list

Table 2

Product Name Current

Consumption

(per circuit) Gain-bandwidth*1 Number of Circuit Package

S-89110ANC-1A1-TFz 50 μA 175 kHz 1 SC-88A

S-89110AMC-1A1-TFU 50 μA 175 kHz 1 SOT-23-5

S-89110BPH-H4A-TFx 50 μA 175 kHz 2 SNT-8A

S-89110BFM-H4A-TFU 50 μA 175 kHz 2 TMSOP-8

S-89120ANC-1A2-TFz 10 μA 35 kHz 1 SC-88A

S-89120AMC-1A2-TFU 10 μA 35 kHz 1 SOT-23-5

S-89120BPH-H4B-TFx 10 μA 35 kHz 2 SNT-8A

S-89120BFM-H4B-TFU 10 μA 35 kHz 2 TMSOP-8

*1. The value when VDD = 3.0 V

Remark 1. x: G or U

2. z: G or S

3. Please select products of environmental code = U for Sn 100%, halogen-free products.

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

S-89110/89120 Series Rev.3.0_00

Seiko Instruments Inc.

 Pin Configurations

1. SC-88A

Table 3 (Product with 1 circuit)

Pin No. Symbol Description

1 IN(+) Non-inverted input pin

2 VSS GND pin

3 IN(−) Inverted input pin

4 OUT Output pin

5 VDD Positive power supply pin

132

Top view

Figure 3

2. SOT-23-5

Table 4 (Product with 1 circuit)

Pin No. Symbol Description

1 IN(+) Non-inverted input pin

2 VSS GND pin

3 IN(−) Inverted input pin

4 OUT Output pin

5 VDD Positive power supply pin

132

Top view

Figure 4

3. SNT-8A

Table 5 (Product with 2 circuits)

Pin No. Symbol Description

1 OUT1 Output pin 1

2 IN1(−) Inverted input pin 1

3 IN1(+) Non-inverted i nput pin 1

4 VSS GND pin

5 IN2(+) Non-inverted i nput pin 2

6 IN2(−) Inverted input pin 2

7 OUT2 Output pin 2

Top view

Figure 5

8 VDD Positive power supply pin

4. TMSOP-8

Table 6 (Product with 2 circuits)

Pin No. Symbol Description

1 OUT1 Output pin 1

2 IN1(−) Inverted input pin 1

3 IN1(+) Non-inverted i nput pin 1

4 VSS GND pin

5 IN2(+) Non-inverted i nput pin 2

6 IN2(−) Inverted input pin 2

7 OUT2 Output pin 2

Top view

Figure 6

8 VDD Positive power supply pin

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

Rev.3.0_00 S-89110/89120 Series

Seiko Instruments Inc. 7

 Absolute Maximum Ratings

Table 7 (Ta = +25°C unless other wise specifie d)

Item Symbol Absolute Maximum Rating Unit

Power supply voltage VDD V

SS − 0.3 to VSS + 10.0 V

Input voltage VIN V

SS − 0.3 to VSS + 7.0 (7.0 max. ) V

Output voltage VOUT V

SS − 0.3 to VDD + 0.3 (7.0 max. ) V

Differential input voltage VIND ±7.0 V

ISINK 13 mA

Output pin current ISOURCE 9 mA

SC-88A 350*1 mW

SOT-23-5 600*1 mW

SNT-8A 450*1 mW

Power dissipation

TMSOP-8

650*1 mW

Operating ambient tem peratu re Topr −40 to +85 °C

Storage temperat ure Tstg −55 to +125 °C

*1. When mounted on bo ar d

[Mounted board]

(1) Board size: 114.3 mm × 76.2 mm × t1.6 mm

(2) Board name: JEDEC STANDARD51-7

Caution The absolute maximum ratings are rated values exceeding which the product could suffer

physical damage. These values must therefore not be exceeded under any conditions.

0 50 100 150

Ambient Temperature (Ta) [°C]

700

600

500

400

300

200

100

Power Dissipation (P

) [mW]

TMSOP-8

SOT-23-5

SC-88A

SNT-8A

Figure 7 Power Dissipation of Packag e (Wh en Mo unted on Board)

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

S-89110/89120 Series Rev.3.0_00

Seiko Instruments Inc.

 Electrical Characteristics

Table 8

(Ta = +25°C unless other wise specifie d)

Item Symbol Condition Min. Typ. Max. Unit

Test

Circuit

Range of oper at in g po wer suppl y

voltage VDD − 1.8 − 5.5 V −

1. VDD = 5.0 V Table 9

DC Electrical Ch aracte risti cs (VDD = 5.0 V) (Ta = +25°C unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit

Test

Circuit

S-89110 Series − 50 120 μA 5

Current consumpt io n (per c ir cuit) IDD S-89120 Serie s − 10 30 μA 5

Input offset vo l tage VIO − −4 ±3 +4 mV 1

Input offset vo l tage drift ΔVIO

ΔTa Ta = −40°C to +85°C − ±10 − μV/°C 1

Input offset cur rent IIO − − 1 − pA −

Input bias curr ent IBIAS − − 1 − pA −

Common-mode input vo ltag e rang e VCMR − 0 − 4.3 V 2

Voltage gain ( ope n loop) AVOL VSS + 0.5 V ≤ VOUT ≤ VDD − 0.5 V,

VCMR = 2.5 V 70 80 − dB 8

VOH R

L = 1.0 MΩ 4.9 − − V 3

Maximum output s wing volt ag e VOL R

L = 1.0 MΩ − − 0.1 V 4

Common-mode input si gnal

rejection ratio CMRR − 60 70 − dB 2

Power supply voltage re jecti on rati o PSRR − 60 70 − dB 1

S-89110 Series 120 − − μA 6

Source current ISOURCE V

OUT = 0 V S-89120 Series 25 − − μA 6

Sink current ISINK V

OUT = 0.5 V 9 − − mA 7

Table 10

AC Electrical Ch aracte ristic s (V DD = 5. 0 V) (Ta = +25°C unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit

S-89110 Series − 0.07 − V/μs

Slew rate SR RL = 1.0 MΩ, CL = 15 pF

(Refer to Figure 16) S-8912 0 Serie s − 0.015 − V/μs

S-89110 Series − 180 − kHz

Gain-bandwidth product GBP S-89120 Series − 40 − kHz

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

Rev.3.0_00 S-89110/89120 Series

Seiko Instruments Inc. 9

2. VDD = 3.0 V Table 11

DC Electrical Ch aracte risti cs (V DD = 3. 0 V) (Ta = +25°C unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit

Test

Circuit

S-89110 Series − 50 120 μA 5

Current consumpt io n (per c ir cuit) IDD S-89120 Serie s − 10 30 μA 5

Input offset vo l tage VIO − −4 ±3 +4 mV 1

Input offset vo l tage drift ΔVIO

ΔTa Ta = −40°C to +85°C − ±10 − μV/°C 1

Input offset cur rent IIO − − 1 − pA −

Input bias curr ent IBIAS − − 1 − pA −

Common-mode input vo ltag e rang e VCMR − 0 − 2.3 V 2

Voltage gain ( ope n loop) AVOL VSS + 0.5 V ≤ VOUT ≤ VDD − 0.5 V,

VCMR = 1.5 V 70 80 − dB 8

VOH R

L = 1.0 MΩ 2.9 − − V 3

Maximum output s wing volt ag e VOL R

L = 1.0 MΩ − − 0.1 V 4

Common-mode input si gnal

rejection ratio CMRR − 60 70 − dB 2

Power supply voltage re jecti on rati o PSRR − 60 70 − dB 1

S-89110 Series 120 − − μA 6

Source current ISOURCE V

OUT = 0 V S-89120 Series 25 − − μA 6

Sink current ISINK V

OUT = 0.5 V 8 − − mA 7

Table 12

AC Electrical Ch aracte ristic s (V DD = 3. 0 V) (Ta = +25°C unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit

S-89110 Series − 0.07 − V/μs

Slew rate SR RL = 1.0 MΩ, CL = 15 pF

(Refer to Figure 16) S-8912 0 Serie s − 0.015 − V/μs

S-89110 Series − 175 − kHz

Gain-bandwidth product GBP S-89120 Series − 35 − kHz

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

S-89110/89120 Series Rev.3.0_00

Seiko Instruments Inc.

3. VDD = 1.8 V Table 13

DC Electrical Ch aracte risti cs (V DD = 1. 8 V) (Ta = +25°C unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit

Test

Circuit

S-89110 Series − 50 120 μA 5

Current consumpt io n (per c ir cuit) IDD S-89120 Serie s − 10 30 μA 5

Input offset vo l tage VIO − −4 ±3 +4 mV 1

Input offset vo l tage drift ΔVIO

ΔTa Ta = −40°C to +85°C − ±10 − μV/°C 1

Input offset cur rent IIO − − 1 − pA −

Input bias curr ent IBIAS − − 1 − pA −

Common-mode input vo ltag e rang e VCMR − 0 − 1.1 V 2

Voltage gain ( ope n loop) AVOL VSS + 0.5 V ≤ VOUT ≤ VDD − 0.5 V,

VCMR = 0.9 V 70 80 − dB 8

VOH R

L = 1.0 MΩ 1.7 − − V 3

Maximum output s wing volt ag e VOL R

L = 1.0 MΩ − − 0.1 V 4

Common-mode input si gnal

rejection ratio CMRR − 60 70 − dB 2

Power supply voltage re jecti on rati o PSRR − 60 70 − dB 1

S-89110 Series 100 − − μA 6

Source current ISOURCE V

OUT = 0 V S-89120 Series 20 − − μA 6

Sink current ISINK V

OUT = 0.5 V 5 − − mA 7

Table 14

AC Electrical Ch aracte ristic s (V DD = 1. 8 V) (Ta = +25°C unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit

S-89110 Series − 0.07 − V/μs

Slew rate SR RL = 1.0 MΩ, CL = 15 pF

(Refer to Figure 16) S-8912 0 Serie s − 0.015 − V/μs

S-89110 Series − 160 − kHz

Gain-bandwidth product GBP S-89120 Series − 30 − kHz

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

Rev.3.0_00 S-89110/89120 Series

Seiko Instruments Inc. 11

 Test Circuit (Per Circuit)

1. Power supply voltage rejection ratio, input offset voltage

RS RF

− VOUT

VDD

VCMR = VDD / 2

Figure 8

• Power supply voltage rejection ratio (PSRR)

The power supply voltage rejection ratio (PSRR) can be

calculated by the following expression, with VOUT measured at

each VDD.

Test condition s:

When VDD = 1.8 V: VDD = VDD1, VOUT = VOUT1,

When VDD = 5.0 V: VDD = VDD2, VOUT = VOUT2

PSRR = 20 log

⎝

⎜

⎛

⎠

⎟

⎞

VDD1 − VDD2

⎝

⎛⎠

⎞

VOUT1 − VDD1

2 − ⎝

⎛⎠

⎞

VOUT2 − VDD2

2 × RF + RS

• Input offset voltage (VIO)

VIO = ⎝

⎛⎠

⎞

VOUT − VDD

2 × RS

RF + RS

2. Common-mode input signal rejection ratio, common-mode input voltage range

RS RF

− VOUT

VDD

VIN VDD / 2

Figure 9

• Common-mode input signal rejection ratio (CMRR)

The common-mode input signal rejection ratio (CMRR) can be

calculated by the following expression, with VOUT measured at

each VIN.

Test conditions :

When VIN = VCMR Max.: VIN = VIN1, VOUT = VOUT1,

When VIN = VDD / 2: VIN = VIN2, VOUT = VOUT2

CMRR = 20 log ⎝

⎜

⎛

⎠

⎟

⎞

VIN1 − VIN2

VOUT1 − VOUT2 × RF + RS

• Common-mode input voltage range (VCMR)

The common-mode input voltage range is the range of VIN in

which VOUT satisfies the common-mode input signal rejection

ratio specificati ons.

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

S-89110/89120 Series Rev.3.0_00

Seiko Instruments Inc.

3. Maximum output swing voltage (VOH)

− VOH

VDD

VIN1 VIN2

Figure 10

• Maximum output swing voltage (VOH)

Test conditions:

VIN1 = VDD

2 − 0.1 V

VIN2 = VDD

2 + 0.1 V

RL = 1 MΩ

4. Maximum output swing voltage (VOL)

− VOL

VDD

VIN1 VIN2

Figure 11

• Maximum output swing voltage (VOL)

Test conditions :

VIN1 = VDD

2 + 0.1 V

VIN2 = VDD

2 − 0.1 V

RL = 1 MΩ

5. Current consumption

VDD

VCMR = VDD / 2

−

Figure 12

• Current consumption (IDD)

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

Rev.3.0_00 S-89110/89120 Series

Seiko Instruments Inc. 13

6. Source current

−

VDD

VIN1 VIN2

Figure 13

• Source current (ISOURCE)

Test conditions :

VIN1 = VDD

2 − 0.5 V

VIN2 = VDD

2 + 0.5 V

7. Sink current

−

VDD

VIN1 VIN2

VOUT

Figure 14

• Sink current (ISINK)

Test conditions :

VOUT = VSS + 0.5 V

VIN1 = VDD

2 + 0.5 V

VIN2 = VDD

2 − 0.5 V

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

S-89110/89120 Series Rev.3.0_00

Seiko Instruments Inc.

8. Voltage gain (open loop)

RS RF

VDD

−

NULL VOUT

VSSN

VDDN

−

D.U.T

VCMR = VDD / 2

Figure 15

• Voltage-gain (open loop) (AVOL)

The voltage ga in (AVOL) can b e calcul at ed b y the f oll o wing e xpress i on, with measur ed V OUT at each VM.

Test conditions:

When VM = VDD − 0.5 V: VM = VM1, VOUT = VOUT1,

When VM = VSS + 0.5 V: VM = VM2, VOUT = VOUT2

AVOL = 20 log ⎝

⎜

⎛

⎠

⎟

⎞

VM1 − VM2

VOUT1 − VOUT2 × RF + RS

9. Slew rate (SR)

Measured by the voltage follower circuit.

VCMR Max.

VSS

(= 0 V)

tTHL

VCMR Max. × 0.9

tR = tF = 20 ns (VSS to VCMR Max.)

tTLH VCMR Max. × 0.1

VIN(+)

VOUT

(= VIN(−))

SR = VCMR Max. × 0.8

tTLH

SR = VCMR Max. × 0.8

tTHL

Figure 16

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

Rev.3.0_00 S-89110/89120 Series

Seiko Instruments Inc. 15

 Precautions

• Generally an operational amplifier may cause oscillation, depending on the selection of external parts. Perform

thorough evalu atio n usi ng th e actual ap plic ation to set the c onst ant .

• Do not apply an electrostatic discharge to this IC that exceeds performance ratings of the built-in electrostatic

protection circ uit.

• SII claims no responsibility for any disputes arising out of or in connection with any infringement by products

including this I C of pate nt s o wned b y a th ir d part y.

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

S-89110/89120 Series Rev.3.0_00

Seiko Instruments Inc.

 Characteristics (Typical Data)

1. Current consumption (per circuit) vs. Power supply voltage

1. 1 S-89110 Series 1. 2 S-89120 Series

IDD − VDD, VSS = 0 V

100

[μA]

[V]

0 1 2 3 4 5 6

85°C

25°C

Ta = −40°C

IDD − VDD, VSS = 0 V

[μA]

[V]

0123 4 56

85°C

25°C

Ta = −40°C

2. Voltage gain vs. Frequency

2. 1 S-89110 Series 2. 2 S-89120 Series

AVOL − f, VDD = 3.0 V, VSS = 0 V

100

VOL

[dB]

f [kHz]

0.001 0.01 0.1 1 10 100 1000

85°C

25°C

Ta = −40°C

AVOL − f, VDD = 3.0 V, VSS = 0 V

100

VOL

[dB]

f [kHz]

0.001 0.01 0.1 1 10 100 1000

Ta = −40°C

85°C

25°C

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

Rev.3.0_00 S-89110/89120 Series

Seiko Instruments Inc. 17

3. Output current

3. 1 ISOURCE vs. Power supply voltage

3. 1. 1 S-89110 Se ries 3. 1. 2 S-89120 Se ries

ISOURCE − VDD, VOUT = 0 V, VSS = 0 V

500

400

300

200

100

SOURCE

[μA]

[V]

0 1 2 3 4 5 6

25°C 85°C

Ta = −40°C

ISOURCE − VDD, VOUT = 0 V, VSS = 0 V

100

SOURCE

[μA]

[V]

0 1 2 3 4 5 6

25°C 85°C

Ta = −40°C

3. 2 ISINK vs. Power supply voltage

3. 2. 1 S-89110 Se ries 3. 2. 2 S-89120 Se ries

ISINK − VDD, VOUT = 0.5 V, VSS = 0 V

SINK

[mA]

[V]

0 2 4 6

85°C

25°C Ta = −40°C

1 3 5

ISINK − VDD, VOUT = 0.5 V, VSS = 0 V

SINK

[mA]

[V]

0 1 2 3 4 5 6

Ta = −40°C

25°C

85°C

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

S-89110/89120 Series Rev.3.0_00

Seiko Instruments Inc.

3. 3 Output voltag e (VOUT) vs. ISOURCE

3. 3. 1 S-89110 Se ries

VOUT − ISOURCE, VDD = 1.8 V, VSS = 0 V

2.0

1.5

1.0

0.5

0.0

OUT

[V]

SOURCE

[μA]

0 50 100 150 200 250 350

300

85°C

Ta = −40°C

25°C

VOUT − ISOURCE, VDD = 3.0 V, VSS = 0 V

3.0

2.5

1.5

0.5

0.0

OUT

[V]

SOURCE

[μA]

0 50 100 150 200 250 350

300

1.0

2.0 25°C

85°C

Ta = −40°C

VOUT − ISOURCE, VDD = 5.0 V, VSS = 0 V

5.0

3.0

1.0

0.0

OUT

[V]

SOURCE

[μA]

0 50 100 150 200 250 350

300

2.0

4.0 85°C

25°C

Ta = −40°C

3. 3. 2 S-89120 Se ries

VOUT − ISOURCE, VDD = 1.8 V, VSS = 0 V

2.0

1.5

1.0

0.5

0.0

OUT

[V]

SOURCE

[μA]

0 10 20 30 40 50 70

25°C

85°C

Ta = −40°C

VOUT − ISOURCE, VDD = 3.0 V, VSS = 0 V

3.0

2.5

1.5

0.5

0.0

OUT

[V]

SOURCE

[μA]

0 10 20 30 40 50 70

1.0

2.0 85°C

25°C

Ta = −40°C

VOUT − ISOURCE, VDD = 5.0 V, VSS = 0 V

5.0

3.0

1.0

0.0

OUT

[V]

SOURCE

[μA]

0 10 20 30 40 50 70

2.0

4.0

25°C

85°C

Ta = −40°C

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

Rev.3.0_00 S-89110/89120 Series

Seiko Instruments Inc. 19

3. 4 Output voltag e (VOUT) vs. ISINK

3. 4. 1 S-89110 Se ries

VOUT − ISINK, VDD = 1. 8 V, VSS = 0 V

2.0

1.5

1.0

0.5

0.0

OUT

[V]

SINK

[mA]

0 5 10 20

25°C

85°C

Ta = −40°C

VOUT − ISINK, VDD = 3. 0 V, VSS = 0 V

3.0

2.0

1.0

0.5

0.0

OUT

[V]

SINK

[mA]

0 10 20 40

2.5

1.5

25°C

85°C

Ta = −40°C

VOUT − ISINK, VDD = 5. 0 V, VSS = 0 V

5.0

4.0

2.0

1.0

0.0

OUT

[V]

SINK

[mA]

0 20 40 80

3.0

25°C

85°C

Ta = −40°C

3. 4. 2 S-89120 Se ries

VOUT − ISINK, VDD = 1. 8 V, VSS = 0 V

2.0

1.5

1.0

0.5

0.0

OUT

[V]

SINK

[mA]

0 5 10 20

25°C

85°C

Ta = −40°C

VOUT − ISINK, VDD = 3. 0 V, VSS = 0 V

3.0

2.0

1.0

0.5

0.0

OUT

[V]

SINK

[mA]

0 10 20 40

2.5

1.5

25°C

85°C

Ta = −40°C

VOUT − ISINK, VDD = 5. 0 V, VSS = 0 V

5.0

4.0

2.0

1.0

0.0

OUT

[V]

SINK

[mA]

0 20 40 80

3.0 25°C

85°C

Ta = −40°C

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

S-89110/89120 Series Rev.3.0_00

Seiko Instruments Inc.

 Marking Specifications

1. SC-88A

(1) to (3): Product Code (refer to Product Name vs. Product Code)

132

Top view

(1) (2) (3)

Product Name vs. Product Code

Product Code

Product Name (1) (2) (3)

S-89110ANC-1A1-TFz 1 A 1

S-89120ANC-1A2-TFz 1 A 2

Remark z: G or S

2. SOT-23-5

(1) to (3): Product Code (refer to Product Name vs. Product Code)

(4): Lot number

123

Top view

(1) (2) (3) (4)

Product Name vs. Product Code

Product Code

Product Name (1) (2) (3)

S-89110AMC-1A1-TFU 1 A 1

S-89120AMC-1A2-TFU 1 A 2

MINI ANALOG SERIES CMOS OPERATIONAL AMPLIFIER

Rev.3.0_00 S-89110/89120 Series

Seiko Instruments Inc. 21

3. SNT-8A

(1): Blank

(2) to (4): Product Code (refer to Product Name vs. Product Code)

(5), (6): Blank

(7) to (11): Lot number

Top view

(1) (2) (3) (4)

(5) (6) (7) (8)

(9) (

) (

)

Product Name vs. Product Code

Product Code

Product Name (2) (3) (4)

S-89110BPH-H4A-TFx H 4 A

S-89120BPH-H4B-TFx H 4 B

Remark 1. x: G or U

2. Please select products of environmental code = U for Sn 100%, halogen-free products.

4. TMSOP-8

(1): Blank

(2) to (4): Product Code (refer to Product Name vs. Product Code)

(5): Blank

(6) to (8): Lot number

Top view

(1) (2) (3) (4)

(5) (6) (7) (8)

Product Name vs. Product Code

Product Code

Product Name (2) (3) (4)

S-89110BFM-H4A-TFU H 4 A

S-89120BFM-H4B-TFU H 4 B

No.

TITLE

SCALE

UNIT mm

2.0±0.2

1.3±0.1

0.15+0.1

-0.05

0.2+0.1

-0.05

0.650.65

No. NP005-B-P-SD-1.1

SC88A-B-PKG Dimensions

NP005-B-P-SD-1.1

Seiko Instruments Inc.

No.

TITLE

SCALE

UNIT mm

(2.25)

4.0±0.1 2.0±0.1

4.0±0.1

ø1.55±0.05

ø1.05±0.1

0.2±0.05

1.1±0.1

0.3

2.05±0.1

Seiko Instruments Inc.

No. NP005-B-C-SD-2.0

NP005-B-C-SD-2.0

SC88A-B-Carrier Tape

Feed direction

No.

TITLE

SCALE

UNIT mm

QTY. 3000

12.5max.

9.0±0.3

ø13±0.2

(60°) (60°)

Seiko Instruments Inc.

No. NP005-B-R-SD-2.1

NP005-B-R-SD-2.1

SC88A-B-Reel

Enlarged drawing in the central part

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

2.9±0.2

1.9±0.2

0.95±0.1

0.4±0.1

0.16 +0.1

-0.06

123

No. MP005-A-P-SD-1.2

MP005-A-P-SD-1.2

SOT235-A-PKG Dimensions

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

ø1.5 +0.1

-0 2.0±0.05

ø1.0 +0.2

-0 4.0±0.1

1.4±0.2

0.25±0.1

3.2±0.2

123

No. MP005-A-C-SD-2.1

MP005-A-C-SD-2.1

SOT235-A-Carrier Tape

Feed direction

4.0±0.1(10 pitches:40.0±0.2)

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

12.5max.

9.0±0.3

ø13±0.2

(60°) (60°)

QTY. 3,000

No. MP005-A-R-SD-1.1

MP005-A-R-SD-1.1

SOT235-A-Reel

Enlarged drawing in the central part

1.97±0.03

0.2±0.05

0.48±0.02

0.08

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

SNT-8A-A-PKG Dimensions

PH008-A-P-SD-2.0

No. PH008-A-P-SD-2.0

0.5

+0.05

-0.02

123 4

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

PH008-A-C-SD-1.0

SNT-8A-A-Carrier Tape

No. PH008-A-C-SD-1.0

Feed direction

4.0±0.1

2.0±0.05

4.0±0.1

ø1.5 +0.1

-0

ø0.5±0.1

2.25±0.05

0.65±0.05

0.25±0.05

2134

7865

5°

12.5max.

9.0±0.3

ø13±0.2

(60°) (60°)

Enlarged drawing in the central part

QTY.

PH008-A-R-SD-1.0

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

SNT-8A-A-Reel

No. PH008-A-R-SD-1.0

5,000

No.

TITLE

SCALE

UNIT mm

SNT-8A-A-Land Recommendation

Seiko Instruments Inc.

PH008-A-L-SD-3.0

0.3

0.20.3

0.52

2.01

0.52

No. PH008-A-L-SD-3.0

0.3 0.2

Caution Making the wire pattern under the package is possible. However, note that the package

may be upraised due to the thickness made by the silk screen printing and of a solder

resist on the pattern because this package does not have the standoff.

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

2.90±0.2

0.2±0.1

0.65±0.1

0.13±0.1

TMSOP8-A-PKG Dimensions

No. FM008-A-P-SD-1.0

FM008-A-P-SD-1.0

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

0.30±0.05

1.00±0.1

1.05±0.05

1.55

2.00±0.05

4.00±0.1

3.25±0.05

4.00±0.1

TMSOP8-A-Carrier Tape

Feed direction

No. FM008-A-C-SD-1.0

FM008-A-C-SD-1.0

+0.1

-0

No.

TITLE

SCALE

UNIT mm

Seiko Instruments Inc.

16.5max.

13.0±0.3

QTY. 4,000

(60°)

13±0.2

Enlarged drawing in the central part

TMSOP8-A-Reel

No. FM008-A-R-SD-1.0

FM008-A-R-SD-1.0

www.sii-ic.com

• The information described herein is subject to change without notice.

• Seiko Instruments Inc. is not responsible for any problems caused by circuits or diagrams described herein

whose related industrial properties, patents, or other rights belong to third parties. The application circuit

examples explain typical applications of the products, and do not guarantee the success of any specific

mass-production design.

• When the products described herein are regulated products subject to the Wassenaar Arrangement or other

agreements, they may not be exported without authorization from the approp riate governmental authority.

• Use of the information described herein for other purposes and/or reproduction or copying without the

express permissi on of Seiko Instruments Inc. is strictly prohibited.

• The products described herein cannot be used as part of any device or equipment affecting the human

body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus

installed in airplanes and other vehicle s, without prior written permission of Seiko Instruments Inc.

• The products described herein are not designed to be radiation-p roof.

• Although Seiko Instruments Inc. exerts the greatest possible effort to ensure high quality and reliability, the

failure or malfunction of semiconductor products may occur. The user of these products should therefore

give thorough consideration to safety design, including redundancy, fire-prevention measures, and

malfunction prevention, to prevent any accidents, fires, or comm unity damage that may ensue.