MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LBG For airbag module, 105 Series For airbag application High capacitance, low impedance, and good low temperature behavior Endurance with ripple current : 5,000 hours at 105 Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105 Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current 25 & 35Vdc (at 20, 120Hz) 1,000 to 11,000F (at 20, 120Hz) 0 to +30% (A) I=0.01CV (at 20 after 2 minutes) Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) 25V 35V Rated voltage (Vdc) 0.20 0.16 tan (Max.) (at 20, 120Hz) When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. 25V 35V Rated voltage (Vdc) 3 3 Z(-55)/Z(+20) (at 120Hz) Impedance at -40 and 20 100kHz in the STANDARD RATINGS The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105. Capacitance change 20% of the initial value 200% of the initial specified value D.F. (tan) Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life 18 D 12.5 14.5 16 d 0.6 0.8 0.8 0.8 F 5.0 7.5 7.5 7.5 D' D+0.5max. L' L+1.5max. D' d Terminal Code : E Sleeve (PET : Dark blue) F0.5 DIMENSIONS [mm] L' Vent 15min. 4min. Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L BG AAA E AA AAA A AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1,000F:102, 11,000F:113) Lead forming*taping code Terminal code Voltage code (ex. 16V:160, 35V:350) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (1/2) CAT. No. E1001M MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LBG For airbag module, 105 Series STANDARD RATINGS Cap (F) DxL(mm) 1,700 2,400 2,400 2,800 3,000 3,400 3,500 4,200 4,200 4,500 4,600 5,400 5,600 6,000 6,400 6,600 7,800 7,900 9,200 11,000 1,000 1,400 1,400 1,600 1,800 2,000 2,100 2,500 2,500 2,700 2,800 3,200 3,400 3,600 3,800 4,000 4,700 4,800 5,600 6,700 12.5 x 20 12.5 x 25 14.5 x 20 12.5 x 30 16 x 20 14.5 x 25 12.5 x 35 16 x 25 18 x 20 12.5 x 40 14.5 x 31.5 14.5 x 35.5 16 x 31.5 18 x 25 14.5 x 40 16 x 35.5 16 x 40 18 x 31.5 18 x 35.5 18 x 40 12.5 x 20 12.5 x 25 14.5 x 20 12.5 x 30 16 x 20 14.5 x 25 12.5 x 35 16 x 25 18 x 20 12.5 x 40 14.5 x 31.5 14.5 x 35.5 16 x 31.5 18 x 25 14.5 x 40 16 x 35.5 16 x 40 18 x 31.5 18 x 35.5 18 x 40 WV (Vdc) 25 35 Impedance (max/100kHz) Case size 20 -40 0.057 0.045 0.051 0.039 0.044 0.041 0.033 0.033 0.042 0.027 0.032 0.028 0.026 0.030 0.025 0.023 0.021 0.024 0.022 0.020 0.057 0.045 0.051 0.039 0.044 0.041 0.033 0.033 0.042 0.027 0.032 0.028 0.026 0.030 0.025 0.023 0.021 0.024 0.022 0.020 0.29 0.23 0.26 0.20 0.22 0.21 0.17 0.17 0.21 0.14 0.16 0.14 0.13 0.15 0.13 0.12 0.11 0.12 0.11 0.10 0.29 0.23 0.26 0.20 0.22 0.21 0.17 0.17 0.21 0.14 0.16 0.14 0.13 0.15 0.13 0.12 0.11 0.12 0.11 0.10 Rated ripple current (mArms/105,100kHz) 1,700 2,000 2,000 2,300 2,250 2,400 2,700 2,600 2,500 3,100 2,700 3,100 3,200 2,800 3,400 3,500 3,800 3,500 3,700 4,000 1,700 2,000 2,000 2,300 2,250 2,400 2,700 2,600 2,500 3,100 2,700 3,100 3,200 2,800 3,400 3,500 3,800 3,500 3,700 4,000 Part No. ELBG250E172AK20S ELBG250E242AK25S ELBG250E242AU20S ELBG250E282AK30S ELBG250E302AL20S ELBG250E342AU25S ELBG250E352AK35S ELBG250E422AL25S ELBG250E422AM20S ELBG250E452AK40S ELBG250E462AUN3S ELBG250E542AUP1S ELBG250E562ALN3S ELBG250E602AM25S ELBG250E642AU40S ELBG250E662ALP1S ELBG250E782AL40S ELBG250E792AMN3S ELBG250E922AMP1S ELBG250E113AM40S ELBG350E102AK20S ELBG350E142AK25S ELBG350E142AU20S ELBG350E162AK30S ELBG350E182AL20S ELBG350E202AU25S ELBG350E212AK35S ELBG350E252AL25S ELBG350E252AM20S ELBG350E272AK40S ELBG350E282AUN3S ELBG350E322AUP1S ELBG350E342ALN3S ELBG350E362AM25S ELBG350E382AU40S ELBG350E402ALP1S ELBG350E472AL40S ELBG350E482AMN3S ELBG350E562AMP1S ELBG350E672AM40S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Capacitance (F) Multipliers Frequency (Hz) 1,000 to 2,000 2,100 to 3,800 4,000 to 11,000 120 0.60 0.75 0.85 1k 0.87 0.90 0.95 10k 0.95 0.95 0.98 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (2/2) CAT. No. E1001M