SGR117A ADVANCED DATA SHEET RAD HARD 1.5 AMP THREE TERMINAL ADJUSTABLE VOLTAGE REGULATOR DESCRIPTION FEATURES The RAD HARD SGR117A 3-terminal positive adjustable regulators have been designed to meet the most stringent space and strategic level radiation requirements while meeting the industry standard LM117A and LM117 electrical specifications. * Full electrical performance after radiation exposure 1 MEG Rad Total Dose 5x1012 N/cm * 1% output voltage tolerance * 0.01%/V line regulation * 0.3% load regulation * Min. 1.5A output current * Available in TO-257 Package (Hermetic TO-220) In addition to the features of the standard SGR117A, these devices are capable of meeting the attached data sheet electricals after the following radiation events: HIGH RELIABILITY FEATURES-SGR117A TOTAL DOSE: EXCEEDS 1 MEG RAD NEUTRON FLUENCE: 5x1012 N/cm Radiation data available Available to MIL-STD-883 LMI level "S" processing available SCHEMATIC DIAGRAM LINFINITY 3/91 Rev 1.3 10/02 Copyright 1994 1 Microelectronics Inc. 11861 Western Avenue Garden Grove, CA 92841 (714) 898-8121 FAX: (714) 893-2570 SGR117A ABSOLUTE MAXIMUM RATINGS (Note 1) Power Dissipation ....................................... Internally Limited Input to Output Voltage Differential .................................. 40V Storage Temperature Range ......................... -65C to 150C Operating Junction Temperature Hermetic (K, R, T, IG-Packages) ....................................150C Lead Temperature (Soldering, 10 Seconds) .............. 300C Note 1. Exceeding these ratings could cause damage to the device. THERMAL DATA K Package: Thermal Resistance-Junction to Case, JC ................. 3.0C/W Thermal Resistance-Junction to Ambient, JA .............. 35C/W R Package: Thermal Resistance-Junction to Case, JC ................. 5.0C/W Thermal Resistance-Junction to Ambient, JA ............. 40C/W T Package: Thermal Resistance-Junction to Case, JC .................. 15C/W Thermal Resistance-Junction to Ambient, JA ........... 120C/W IG Package: Thermal Resistance-Junction to Case, JC ................. 3.5C/W Thermal Resistance-Junction to Ambient, JA ............. 42C/W Note A. Junction Temperature Calculation: TJ = TA + (PD x JA). Note B. The above numbers for JC are maximums for the limiting thermal resistance of the package in a standard mounting configuration. The JA numbers are meant to be guidelines for the thermal performance of the device/pcboard system. All of the above assume no ambient airflow. RECOMMENDED OPERATING CONDITIONS (Note 2 & 3) Input Voltage Range ................................. (VOUT + 3.5V) to 37V Operating Junction Temperature Range SGR117A ........................................................-55C to 150C Note 2. Range over which the device is functional. Note 3. These ratings are applicable for junction temperatures of less than 150C. ELECTRICAL CHARACTERISTICS (Unless otherwise specified, these specifications apply over full operating ambient temperatures for SGR117 with -55C TA 125C, VIN - VOUT = 5.0V, and for IOUT = 500mA (K and IG), and IOUT = 100mA (T package). Although power dissipation is internally limited, these specifications are applicable for power dissipations of 2W for the T package, and 20W for the K and IG packages. IMAX is 1.5A for the K and IG packages and 500mA for the T package. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.) Parameter Reference Voltage Line Regulation (Note 4) Load Regulation (Note 4) Thermal Regulation (Note 5) Ripple Rejection Adjust Pin Current Adjust Pin Current Change Test Conditions IOUT = 10mA TA = 25C 3V (VIN - VOUT) 40V, P PMAX, 10mA IOUT IMAX 3V (VIN - VOUT) 40V, IL = 10mA TA = 25C TA = TMIN to TMAX 10mA IOUT IMAX VOUT 5V, TA = 25C VOUT 5V, TA = 25C VOUT 5V VOUT 5V TA = 25C, 20ms pulse VOUT = 10V, f =120Hz CADJ = 1F, TA = 25C CADJ = 10F 10mA IOUT IMAX , 2.5V (VIN - VOUT) 40V 1.225 1.250 1.270 1.220 1.25 1.275 66 2 Units V V 0.005 0.01 0.01 0.02 0.01 0.02 0.03 0.05 %/V %/V 5 15 0.1 0.3 20 50 0.3 1 0.002 0.02 5 0.1 20 0.3 0.03 50 1 50 1 0.07 mV % mV % %/W 100 8 dB dB A A 65 80 50 0.2 66 100 5 65 80 50 0.2 LINFINITY 3/91 Rev 1.3 10/02 Copyright 1994 POST NEUTRON 5 x 10 N/cm PRE RAD SGR117A SGR117A Min. Typ. Max. Min. Typ. Max. 1.238 1.250 1.262 1.220 1.275 Microelectronics Inc. 11861 Western Avenue Garden Grove, CA 92841 (714) 898-8121 FAX: (714) 893-2570 SGR117A ELECTRICAL CHARACTERISTICS (continued) POST NEUTRON 5 x 10 N/cm PRE RAD Parameter Minimum Load Current Current Limit Temperature Stability (Note 5) Long Term Stability (Note 5) RMS Output Noise (% of VOUT) SGR117A SGR117A Min. Typ. Max. Min. Typ. Max. 3.5 5 3.5 8 Test Conditions (VIN - VOUT) = 40V (VIN - VOUT) 15V K, R, IG Packages T Package (VIN - VOUT) = 40V, TJ = 25C K, R, IG Packages T Package Units mA 1.5 0.5 2.2 0.8 1.5 0.5 2.2 0.8 A A 0.3 0.15 0.4 0.2 1 0.3 0.001 0.3 0.15 0.4 0.2 A A % % % TA = 125C, 1000 Hours TA = 25C, 10Hz f 10 KHz (Note 5) 2 1 Note 4. Regulation is measured at constant junction temperature, using pulse testing with a low duty cycle. Changes in output voltage due to heating effects are covered under the specification for thermal regulation. Note 5. These parameters, although guaranteed, are not tested in production. CONNECTION DIAGRAMS & ORDERING INFORMATION Package 3-TERMINAL TO-3 METAL CAN K-PACKAGE Part No. (See Notes Below) Ambient Temperature Range SGR117AK SGR117AK/883B -55C to 125C -55C to 125C Connection Diagram ADJUSTMENT 1 2 CASE IS V OUT VIN 3-TERMINAL TO-66 METAL CAN R-PACKAGE SGR117AR SGR117AR/883B -55C to 125C -55C to 125C ADJUSTMENT 1 2 CASE IS VOUT VIN 3-PIN TO-39 METAL CAN T-PACKAGE SGR117AT SGR117AT/883B -55C to 125C -55C to 125C VIN 1 ADJUST 2 3 VOUT CASE IS VOUT 3-PIN HERMETIC TO-257 IG-PACKAGE (Isolated) SGR117AIG/883B -55C to 125C SGR117AIG -55C to 125C VIN VOUT ADJUST Note 1. Contact factory for JAN and DESC product availability. 2. All parts are viewed from the top. LINFINITY 3/91 Rev 1.3 10/02 Copyright 1994 3 Microelectronics Inc. 11861 Western Avenue Garden Grove, CA 92841 (714) 898-8121 FAX: (714) 893-2570