SGR117A
3/91 Rev 1.3 10/02 LINFINITY Microelectronics Inc.
Copyright 1994 11861 Western Avenue ∞ ∞
∞ ∞
∞ Garden Grove, CA 92841
2(714) 898-8121 ∞∞
∞∞
∞ FAX: (714) 893-2570
Power Dissipation .......................................
Input to Output Voltage Differential ..................................
Storage Temperature Range .........................
ABSOLUTE MAXIMUM RATINGS (Note 1)
Internally Limited
40V
-65°C to 150°C
Operating Junction Temperature
Hermetic (K, R, T, IG-Packages) ....................................
Lead Temperature (Soldering, 10 Seconds) .............. 150°C
300°C
Note 1. Exceeding these ratings could cause damage to the device.
THERMAL DATA
K Package:
Thermal Resistance-Junction to Case, θJC................. 3.0°C/W
Thermal Resistance-Junction to Ambient, θJA .............. 35°C/W
R Package:
Thermal Resistance-Junction to Case, θJC................. 5.0°C/W
Thermal Resistance-Junction to Ambient, θJA ............. 40°C/W
T Package:
Thermal Resistance-Junction to Case, θJC.................. 15°C/W
Thermal Resistance-Junction to Ambient, θJA ........... 120°C/W
IG Package:
Thermal Resistance-Junction to Case, θJC................. 3.5°C/W
Thermal Resistance-Junction to Ambient, θJA ............. 42°C/W
Note A. Junction Temperature Calculation: TJ = TA + (PD x θJA).
Note B. The above numbers for θJC are maximums for the limiting
thermal resistance of the package in a standard mount-
ing configuration. The θJA numbers are meant to be
guidelines for the thermal performance of the device/pc-
board system. All of the above assume no ambient
airflow.
Input Voltage Range ................................. (VOUT + 3.5V) to 37V Operating Junction Temperature Range
SGR117A ........................................................-55°C to 150°C
RECOMMENDED OPERATING CONDITIONS (Note 2 & 3)
Units
SGR117A
Min. Typ. Max.
Min. Typ. Max.
SGR117A
Parameter Test Conditions
IOUT = 10mA TA = 25°C
3V ≤ (VIN - VOUT) ≤ 40V, P ≤ PMAX,
10mA ≤ IOUT ≤ IMAX
3V ≤ (VIN - VOUT) ≤ 40V, IL = 10mA
TA = 25°C
TA = TMIN to TMAX
10mA ≤ IOUT ≤ IMAX
VOUT ≤ 5V, TA = 25°C
VOUT ≥ 5V, TA = 25°C
VOUT ≤ 5V
VOUT ≥ 5V
TA = 25°C, 20ms pulse
VOUT = 10V, f =120Hz
CADJ = 1µF, TA = 25°C
CADJ = 10µF
10mA ≤ IOUT ≤ IMAX , 2.5V ≤ (VIN - VOUT) ≤ 40V
Reference Voltage
Line Regulation (Note 4)
Load Regulation (Note 4)
Thermal Regulation (Note 5)
Ripple Rejection
Adjust Pin Current
Adjust Pin Current Change
Note 2. Range over which the device is functional.
Note 3. These ratings are applicable for junction temperatures of less than 150°C.
ELECTRICAL CHARACTERISTICS
(Unless otherwise specified, these specifications apply over full operating ambient temperatures for SGR117 with -55°C ≤ TA ≤ 125°C, VIN - VOUT =
5.0V, and for IOUT = 500mA (K and IG), and IOUT = 100mA (T package). Although power dissipation is internally limited, these specifications are applicable
for power dissipations of 2W for the T package, and 20W for the K and IG packages. IMAX is 1.5A for the K and IG packages and 500mA for the T package.
Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperatur e.)
PRE RAD POST NEUTRON
5 x 10¹² N/cm²
1.220
1.220
66
1.262
1.270
0.01
0.02
15
0.3
50
1
0.02
100
5
1.238
1.225
66
1.250
1.250
0.005
0.01
5
0.1
20
0.3
0.002
65
80
50
0.2
1.25
0.01
0.02
5
0.1
20
0.3
0.03
65
80
50
0.2
1.275
1.275
0.03
0.05
50
1
50
1
0.07
100
8
V
V
%/V
%/V
mV
%
mV
%
%/W
dB
dB
µA
µA