SPECIFICATION
SP-480-3.3 SP-480-5 SP-480-12 SP-480-15 SP-480-24 SP-480-48
MODEL
DCVOLTAGE
RATEDCURRENT
CURRENTRANGE
RATEDPOWER
OUTPUT VOLTAGE ADJ.RANGE
LINEREGULATION
LOADREGULATION
SETUP,RISETIME
HOLDUP TIME (Typ.)
VOLTAGERANGE Note.7
FREQUENCY RANGE
POWERFACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
INRUSHCURRENT (Typ.)
LEAKAGECURRENT
OVERTEMPERATURE Note.4
SAFETY STANDARDS
HARMONICCURRENT
EMSIMMUNITY
WORKINGHUMIDITY
WORKINGTEMP.
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
REMOTECONTROL
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVERVOLTAGE
ACCURRENT (Typ.)
3.3V 5V 12V 15V 24V 48V
85A 85A 40A 32A 20A 10A
0~85A 0~85A 0~43A 0~35A 0~22A 0~11A
280.5W
280.5W
425W
425W
480W
516W
480W
525W
480W
528W
480W
528W
80mVp-p 80mVp-p 120mVp-p 150mVp-p 150mVp-p 240mVp-p
2.9~3.6V 4.5~5.5V 10.8~13.2V 13.5~18V 22~27.6V 41~56V
2.0% 2.0% 1.5% 1.5% 1.0% 1.0%
0.5% 0.5% 0.3% 0.3% 0.2% 0.2%
1.0% 1.0% 0.5% 0.5% 0.5% 0.5%
1000ms,80ms/230VAC2500ms,80ms/115VACatfullload
18ms/230VAC18ms/115VACatfullload
85~264VAC120~370VDC
47~63Hz
PF>0.95/230VACPF>0.98/115VACatfullload
73% 79% 85% 85% 87% 89%
6.5A/115VAC3.5A/230VAC
20A/115VAC40A/230VAC
<2mA /240VAC
87~103A 87~103A 45.15~58.05A 36.75~47.25A 23.1~29.7A 11.55~14.85A
3.8~4.45V 5.75~6.75V 13.8~16.2V 18~21V 28.8~33.6V 57.6~67.2V
Protectiontype:Constantcurrentlimiting,recoversautomaticallyafterconditionsisremoved
Protectiontype:Shutdowno/pvoltage,re-powerontorecover
80 (TSW1)detectonheatsinkofpowertransistor90 (TSW2)detectonheatsinkofpowerdiode
Protectiontype:Shutdowno/pvoltage,recoversautomaticallyaftertemperaturegoesdown
UL60950-1, TUVEN60950-1approved
CompliancetoEN55022(CISPR22)ClassB
Complianceto EN61000-3-2,-3
Complianceto EN61000-4-2,3,4,5,6,8,11;ENV50204,EN61000-6-2(EN50082-2),lightindustrylevel,criteria A
20~90%RHnon-condensing
-20~+60 (Refertooutputloadderatingcurve)
-40~+85 ,10~95%RH
0.03%/ (0~50
10~500Hz,2G10min./1cycle,60min.eachalongX, Y,Zaxes
120.5Khrsmin.MIL-HDBK-217F(25 )
RC+/RC-:0~0.8V=poweron;4~10V=poweroff
278*127*43mm(L*W*H)
1.7Kg;6pcs/11.3Kg/0.67CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. TSW1: Detect on heatsink of power transistor.
TSW2: Detect on heatsink of output diode.
5. 33% Duty cycle maximum within every 30 minute. Average output power should not exceed the rated power.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
7. Derating may be needed under low input voltages. Please check the derating curve for more details.
For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
FileName:SP-480-SPEC2010-10-18
FUNCTION
480WSingleOutputwithPFCFunction
Universal AC input / Full range
Built in active PFC function, PF>0.95
Protections: Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC fan
High power density 5.18w/in
Low profile:43mm thickness
Built-in remote ON-OFF control
Built-in remote sense function
Active AC surge current limiting
3 years warranty
3
Features :
SP-480 series
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:Short
I/P-O/P,I/P-FG:100MOhms/500VDC /25 /70%RH
RIPPLE&NOISE(max.) Note.2
VOLTAGETOLERANCE Note.3
ENVIRONMENT
SAFETY &
EMC
(Note6)
PROTECTION
EMICONDUCTION&RADIATION
PEAKLOAD(10min.) Note.5
http://store.iiic.cc/