IXD_604SI & SIA INTEGRATED CIRCUITS DIVISION Automotive Grade 4-Ampere, Dual Low-Side, Ultrafast MOSFET Drivers Features Description * * * * The IXD_604SI and IXD_604SIA are automotive grade, dual high-speed gate drivers that are qualified according to AEC Q100 standards. Each of the two outputs can source and sink 4A of peak current, while producing rise and fall times of less than 10ns. The outputs and inputs are rated to 35V. The input of each driver is virtually immune to latch-up, and proprietary circuitry eliminates cross-conduction and "shoot-through." The IXD_604 has a Grade 1, -40C to +125C ambient operating temperature range. * * * * * * AEC Q100 Qualified 4A Peak Source/Sink Drive Current Wide Operating Voltage Range: 4.5V to 35V AEC Q100 Grade 1 -40C to +125C Operating Temperature Range Logic Input Withstands Negative Swing of up to 5V Outputs May be Connected in Parallel for Higher Drive Current Matched Rise and Fall Times Low Propagation Delay Time Low, 10A Supply Current Low Output Impedance Features * * * * Automotive DC/DC regulators Electronic Power Steering Electric Vehicle Power Train Drives Brushless DC motors The IXDD604 is a dual non-inverting driver with an enable. The IXDN604 is a dual non-inverting driver, the IXDI604 is a dual inverting driver, and the IXDF604 has one inverting driver and one non-inverting driver. The AEC Q100 qualified IXD_604SIA is available in a standard 8-pin SOIC package, and the IXD_604SI is available in an 8-pin Power SOIC package with an exposed metal back. e3 Pb Ordering Information Part Number IXDD604SI IXDD604SITR IXDD604SIA IXDD604SIATR IXDF604SI IXDF604SITR IXDF604SIA IXDF604SIATR IXDI604SI IXDI604SITR IXDI604SIA IXDI604SIATR IXDN604SI IXDN604SITR IXDN604SIA IXDN604SIATR Logic Configuration ENA INA A OUTA B OUTB ENB INB INA A OUTA INB B OUTB INA A OUTA INB B OUTB INA A OUTA INB B OUTB DS-IXD_604SI_SIA-R01 Package Type Packing Method Quantity 8-Pin Power SOIC with Exposed Metal Back 8-Pin Power SOIC with Exposed Metal Back 8-Pin SOIC Tube Tape & Reel Tube 100 2000 100 8-Pin SOIC Tape & Reel 2000 8-Pin Power SOIC with Exposed Metal Back 8-Pin Power SOIC with Exposed Metal Back 8-Pin SOIC 8-Pin SOIC 8-Pin Power SOIC with Exposed Metal Back 8-Pin Power SOIC with Exposed Metal Back 8-Pin SOIC 8-Pin SOIC 8-Pin Power SOIC with Exposed Metal Back 8-Pin Power SOIC with Exposed Metal Back 8-Pin SOIC 8-Pin SOIC Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel Tube Tape & Reel 100 2000 100 2000 100 2000 100 2000 100 2000 100 2000 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION IXD_604SI & SIA 1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Pin Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Pin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 Electrical Characteristics: TA = 25C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 Electrical Characteristics: -40C < TA < +125C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7 Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 3 3 3 4 4 5 2. IXD_604 Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 Timing Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 Characteristics Test Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. Block Diagrams & Truth Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 IXDD604 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 IXDI604 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 IXDF604. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 IXDN604 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6 6 6 6 4. Typical Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5. Manufacturing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 ESD Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 Mechanical Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 www.ixysic.com 10 10 10 10 11 R01 IXD_604SI & SIA INTEGRATED CIRCUITS DIVISION 1 Specifications 1.1 Pin Configurations 1.2 Pin Definitions IXDD604SI/SIA IXDF604SI/SIA Pin Name ENA 1 INA 2 GND 3 INB 4 A B 8 ENB NC 1 7 OUTA INA 2 6 VCC GND 3 5 OUTB INB 4 IXDI604SI/SIA NC 1 INA 2 GND 3 INB 4 A B A B 8 NC 7 OUTA 6 VCC 5 OUTB Description INA Channel A Logic Input INB Channel B Logic Input ENA Channel A Enable Input Drive pin low to disable Channel A and force Channel A Output to a high impedance state ENB Channel B Enable Input Drive pin low to disable Channel A and force Channel A Output to a high impedance state OUTA OUTA Channel A Output - Sources or sinks current to turn-on or turn-off a discrete MOSFET or IGBT OUTB OUTB Channel B Output - Sources or sinks current to turn-on or turn-off a discrete MOSFET or IGBT VCC Supply Voltage - Provides power to the device GND Ground - Common ground reference for the device IXDN604SI/SIA 8 NC NC 1 7 OUTA INA 2 6 VCC GND 3 5 OUTB INB 4 A B 8 NC 7 OUTA 6 VCC 5 OUTB 1.3 Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units VCC -0.3 40 V VINx , VENx -5 VCC+0.3 V IOUT - 4 A Junction Temperature TJ -55 +150 C Storage Temperature TSTG -65 +150 C Supply Voltage Input Voltage Output Current Absolute maximum electrical ratings are at 25C Absolute maximum ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. 1.4 Recommended Operating Conditions Parameter Symbol Range Units VCC 4.5 to 35 V Operating Temperature Range TA -40 to +125 C R01 www.ixysic.com Supply Voltage 3 IXD_604SI & SIA INTEGRATED CIRCUITS DIVISION 1.5 Electrical Characteristics: TA = 25C Test Conditions: 4.5V < VCC < 35V, one channel (unless otherwise noted). Conditions Symbol Minimum Input Voltage, High Parameter 4.5V < VCC < 18V VIH 3.0 - - Input Voltage, Low 4.5V < VCC < 18V VIL - - 0.8 0V < VIN < VCC IIN 10 A IXDD604 only VENH 2/3VCC - High EN Input Voltage - Low EN Input Voltage IXDD604 only VENL - V Output Voltage, High - VOH VCC-0.025 1/3VCC - - Output Voltage, Low - VOL - - 0.025 Output Resistance, High State VCC=18V, IOUT=-10mA ROH - 1.3 2.5 Output Resistance, Low State ROL - 1.1 2 IDC - - 1 Rise Time VCC=18V, IOUT=10mA Limited by package power dissipation VCC=18V, CLOAD=1000pF tr - 9 16 Fall Time VCC=18V, CLOAD=1000pF tf - 8 14 On-Time Propagation Delay VCC=18V, CLOAD=1000pF tondly - 29 50 Off-Time Propagation Delay VCC=18V, CLOAD=1000pF toffdly - 35 50 Enable to Output-High Delay Time IXDD604 only, VCC=18V tENOH - 35 55 Disable to High Impedance State Delay Time IXDD604 only, VCC=18V tDOLD - 40 55 VCC=18V, VIN=3.5V VCC=18V, VIN=0V VCC=18V, VIN=VCC REN - 200 1 <1 <1 3 10 10 Input Current Output Current, Continuous Enable Pull-Up Resistor Power Supply Current ICC Typical Maximum Units V V A ns k mA A 1.6 Electrical Characteristics: -40C < TA < +125C Test Conditions: 4.5V < VCC < 35V, one channel (unless otherwise noted). Parameter Conditions Symbol Minimum Maximum Input Voltage, High 4.5V < VCC < 18V VIH 3.1 - Input Voltage, Low 4.5V < VCC < 18V VIL - 0.65 0V < VIN < VCC IIN - VOH -10 VCC-0.025 10 Output Voltage, High Output Voltage, Low - VOL - 0.025 Output Resistance, High State VCC=18V, IOUT=-10mA ROH - 3 Output Resistance, Low State ROL - 2.5 IDC - 1 Rise Time VCC=18V, IOUT=10mA Limited by package power dissipation VCC=18V, CLOAD=1000pF tr - 16 Fall Time VCC=18V, CLOAD=1000pF tf - 14 On-Time Propagation Delay VCC=18V, CLOAD=1000pF tondly - 65 Off-Time Propagation Delay VCC=18V, CLOAD=1000pF toffdly - 65 Enable to Output-High Delay Time IXDD604 only, VCC=18V tENOH - 65 Disable to High Impedance State Delay Time IXDD604 only, VCC=18V VCC=18V, VIN=3.5V VCC=18V, VIN=0V VCC=18V, VIN=VCC tDOLD - 65 3.5 150 150 Input Current Output Current, Continuous Power Supply Current 4 www.ixysic.com ICC - Units V A V A ns mA A R01 IXD_604SI & SIA INTEGRATED CIRCUITS DIVISION 1.7 Thermal Characteristics Package SI (8-Pin Power SOIC) SIA (8-Pin SOIC) SI (8-Pin Power SOIC) Parameter Symbol Rating Thermal Resistance, Junction-to-Ambient JA 85 Thermal Resistance, Junction-to-Case JC Units 120 C/W 10 2 IXD_604 Performance 2.1 Timing Diagrams VIH INx VIH INx VIL VIL tondly toffdly tondly toffdly 90% OUTx 90% OUTx 10% 10% tf tr tf tr 2.2 Characteristics Test Diagram + 0.1F 10F INA VCC - VCC INB OUTA OUTB CLOAD VCC VIN ENA ENB GND R01 Tektronix Current Probe 6302 www.ixysic.com CLOAD Tektronix Current Probe 6302 5 IXD_604SI & SIA INTEGRATED CIRCUITS DIVISION 3 Block Diagrams & Truth Tables 3.1 IXDD604 3.3 IXDF604 IXDD604 IXDF604 VCC VCC 200k OUTA INA VCC ENA INA GND OUTA VCC VCC 200k OUTB INB VCC ENB INB OUTB GND INA OUTA 0 1 1 0 INX ENX OUTX INB 0 1 or open OUTB 0 0 1 1 or open 0 1 1 0 0 1 Z 1 0 Z 3.4 IXDN604 3.2 IXDI604 IXDI604 IXDN604 VCC OUTA INA VCC OUTA INA GND GND VCC OUTB INB 6 VCC OUTB INB INX OUTX INX OUTX 0 1 0 0 1 0 1 1 www.ixysic.com R01 IXD_604SI & SIA INTEGRATED CIRCUITS DIVISION 4 Typical Performance Characteristics A&B Rise Times vs. Supply Voltage (Input=0-5V, f=10kHz, TA=25C) 120 A&B Rise and Fall Times vs. Temperature (Input=0-5V, VCC=18V, CL=1nF) A&B Fall Times vs. Supply Voltage (Input=0-5V, f=10kHz, TA=25C) 120 10 80 CL=10nF CL=1nF CL=470pF 60 40 80 40 20 0 0 15 20 25 30 Supply Voltage (V) 120 40 0 5 10 15 20 25 30 Supply Voltage (V) A&B Rise Time vs. Load Capacitance at Various VCC Levels VCC=4.5V VCC=8V VCC=12V VCC=18V VCC=24V VCC=35V 100 Rise Time (ns) 35 80 60 120 4000 6000 8000 Load Capacitance (pF) 140 120 100 toffdly tondly 20 5 30 60 0 10000 2000 4000 6000 8000 Load Capacitance (pF) 100 120 140 50 40 toffdly 30 tondly Min VIH 2.3 2.1 Max VIL 1.9 4 6 8 Input Voltage (V) 10 100 120 140 toffdly 40 35 tondly 30 25 -40 -20 12 2.8 2.6 2.4 2.2 VIH 2.0 1.8 VIL 0 5 10 15 20 25 Supply Voltage (V) www.ixysic.com 30 35 0 20 40 60 80 Temperature (C) 100 120 140 Enable Threshold vs. Supply Voltage Input Threshold vs. Supply Voltage 3.2 1.4 20 40 60 80 Temperature (C) 45 20 2 1.6 1.7 10000 Propagation Delay vs. Temperature Enable Threshold (V) 2.5 0 20 40 60 80 Temperature (C) 50 3.0 2.7 -40 -20 0 40 60 35 Input Threshold (V) Input Threshold Voltage (V) 10 15 20 25 Supply Voltage (V) Input Threshold Voltage vs. Temperature (VCC=18V, CL=1nF) 2.9 R01 -40 -20 20 0 5 4 40 Propagation Delay vs. Input Voltage (VCC=15V, CL=1nF) 70 Propagation Delay (ns) Propagation Delay (ns) 2000 Propagation Delay vs. Supply Voltage (VIN=0-5V, CL=1nF, f=1kHz) 40 6 0 0 60 tf 7 VCC=4.5V VCC=8V VCC=12V VCC=18V VCC=24V VCC=35V 80 0 80 tr 8 20 20 160 9 A&B Fall Time vs. Load Capacitance at Various VCC Levels 100 40 35 Propagation Delay (ns) 10 Fall Time (ns) 5 CL=10nF CL=1nF CL=470pF 60 20 0 Rise & Fall Times (ns) 100 Fall Time (ns) Rise Time (ns) 100 22 20 18 16 14 12 10 8 6 4 2 0 VENH VENL 0 5 10 15 20 25 Supply Voltage (V) 30 35 7 IXD_604SI & SIA INTEGRATED CIRCUITS DIVISION 100 400 10 Supply Current vs. Load Capacitance Both Outputs Active (VCC=18V) 250 f=1MHz f=500kHz f=100kHz f=50kHz 200 f=2MHz 350 300 400 150 100 250 200 150 100 50 f=2MHz f=1MHz f=500kHz f=100kHz f=50kHz 250 200 150 100 50 Supply Current vs. Frequency Both Outputs Active (VCC=12V) 100 10 1 0.1 10 100 1000 Frequency (kHz) CL=10nF CL=1nF CL=470pF 100 10 1 10000 1 Supply Current vs. Frequency Both Outputs Active (VCC=8V) 1000 CL=10nF CL=1nF CL=470pF 10000 0.1 1 10000 100 10 10 1 0.1 100 1000 Frequency (kHz) 10000 Quiesent Supply Current vs. Temperature (VCC=18V) 3.0 CL=10nF CL=1nF CL=470pF Supply Current (mA) 1000 Load Capacitance (pF) Supply Current (mA) Supply Current (mA) 10 1000 Load Capacitance (pF) Supply Current vs. Frequency Both Outputs Active (VCC=18V) 1000 CL=10nF CL=1nF CL=470pF 100 0 100 10000 1 0 100 1000 1000 Load Capacitance (pF) Supply Current vs. Frequency Both Outputs Active (VCC=35V) 1000 Supply Current (mA) 300 Supply Current (mA) 10000 Supply Current vs. Load Capacitance Both Outputs Active (VCC=8V) 350 0 100 Supply Current (mA) 1000 Load Capacitance (pF) f=2MHz f=1MHz f=500kHz f=100kHz f=50kHz 300 50 1 100 Supply Current vs. Load Capacitance Both Outputs Active (VCC=12V) 350 Supply Current (mA) f=2MHz f=1MHz f=500kHz f=100kHz f=50kHz f=10kHz Supply Current (mA) Supply Current (mA) 1000 Supply Current vs. Load Capacitance Both Outputs Active (VCC=35V) VIN=3.5V VIN=5V VIN=10V 2.5 2.0 1.5 1.0 0.5 VIN=0V & 18V 0.01 1000 Dynamic Supply Current vs. Temperature (VCC=18V, VIN=5V, f=1khz, CL=1nF) 1.2 1.0 0.8 0.6 0.4 0.2 0.0 10 100 1000 Frequency (kHz) 0 20 40 60 80 Temperature (C) 100 120 140 -40 -20 10000 Output Source Current vs. Supply Voltage (CL=10nF) -10 -8 -6 -4 -2 0 20 40 60 80 Temperature (C) 100 120 140 Output Sink Current vs. Supply Voltage (CL=10nF) 10 8 6 4 2 0 0 -40 -20 8 1 Output Source Current (A) Supply Current (mA) 10 100 Frequency (kHz) Output Sink Current (A) 1 1.4 0.0 0.01 0 5 10 15 20 25 Supply Voltage (V) www.ixysic.com 30 35 0 5 10 15 20 25 Supply Voltage (V) 30 35 R01 IXD_604SI & SIA INTEGRATED CIRCUITS DIVISION Output Source Current vs. Temperature (VCC=18V, CL=10nF) 6.0 Output Sink Current (A) Output Source Current (A) 6 5 4 3 2 0 20 40 60 80 Temperature (C) 100 120 140 4.0 3.0 -40 -20 High State Output Resistance vs. Supply Voltage (IOUT= -10mA) 4.0 3.5 3.0 3.0 2.5 2.0 1.5 1.0 0 20 40 60 80 Temperature (C) 100 120 140 Low State Output Resistance vs. Supply Voltage (IOUT= +10mA) 4.0 3.5 Resistance () Resistance () 5.0 2.0 -40 -20 2.5 2.0 1.5 1.0 0.5 0.5 0.0 0.0 0 R01 Output Sink Current vs. Temperature (VCC=18V, CL=10nF) 5 10 15 20 25 Supply Voltage (V) 30 35 0 www.ixysic.com 5 10 15 20 25 Supply Voltage (V) 30 35 9 IXD_604SI & SIA INTEGRATED CIRCUITS DIVISION 5 Manufacturing Information 5.1 Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating of 1, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. 5.2 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. 5.3 Reflow Profile This product has a maximum body temperature and time rating of 260C for 30 seconds. All other guidelines of J-STD-020 must be observed. Pb 10 e3 www.ixysic.com R01 IXD_604SI & SIA INTEGRATED CIRCUITS DIVISION 5.4 Mechanical Dimensions 5.4.1 SIA Package (8-Pin SOIC) 1.270 REF (0.050) Pin 8 PCB Land Pattern 0.60 (0.024) 0.762 0.254 (0.030 0.010) 3.937 0.254 (0.155 0.010) 5.994 0.254 (0.236 0.010) 1.55 (0.061) 5.40 (0.213) Pin 1 0.406 0.076 (0.016 0.003) 1.346 0.076 (0.053 0.003) 4.928 0.254 (0.194 0.010) 1.27 (0.050) 0.559 0.254 (0.022 0.010) Dimensions mm (inches) 0.051 MIN - 0.254 MAX (0.002 MIN - 0.010 MAX) 5.4.2 SI Package (8-Pin Power SOIC with Exposed Metal Back) 3.80 (0.150) 3.937 0.254 (0.155 0.010) 5.994 0.254 (0.236 0.010) 0.762 0.254 (0.030 0.010) 5.40 2.75 (0.209) (0.108) 1.55 (0.061) Pin 1 0.406 0.076 (0.016 0.003) 1.27 (0.050) 1.270 REF (0.050) 4.928 0.254 (0.194 0.010) 0.60 (0.024) Recommended PCB Land Pattern 1.346 0.076 (0.053 0.003) 2.540 0.254 (0.100 0.010) 7 0.051 MIN - 0.254 MAX (0.002 MIN - 0.010 MAX) 3.556 0.254 (0.140 0.010) Dimensions mm (inches) Note: The exposed metal pad on the back of the SI package should be connected to GND. It is not suitable for carrying current. R01 www.ixysic.com 11 IXD_604SI & SIA INTEGRATED CIRCUITS DIVISION 5.4.3 Tape & Reel Information for SI and SIA Packages 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) W=12.00 (0.472) B0=5.30 (0.209) K0= 2.10 (0.083) A0=6.50 (0.256) P=8.00 (0.315) User Direction of Feed Embossed Carrier Embossment Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-IXD_604SI_SIA-R01 (c)Copyright 2013, IXYS Integrated Circuits Division All rights reserved. Printed in USA. 2/5/2013 12 www.ixysic.com R01