DTC124EUA
Digital Transistors
Features
• Built-in bias resistors enable the configuration of an inverter circuit
without connecting external input resistors
• The bias resistors consist of thin-film resistors with complete
isolation to allow negative biasing of the input. They also have the
advantage of almost completely eliminating parasitic effects.
• Only the on/off conditions need to be set for operation, making
device design easy
Absolute maximum ratings @ 25к
Symbol Parameter Min Typ Max Unit
VCC Supply voltage --- 50 --- V
VIN Input voltage -10 --- 40 V
Pd Power dissipation --- 200 --- mW
Tj Junction temperature --- 150 --- ć
Tstg Storage temperature -55 --- 150 ć
Electrical Characteristics @ 25к
Symbol Parameter Min Typ Max Unit
VI(off) --- --- 0.5 V
VI(on)
Input voltage (VCC=5V, IO=100A)
(VO=0.2V, IO=5mA) 3.0 --- --- V
VO(on) Output voltage (IO/II=10mA/0.5mA) --- 0.1 0.3 V
IIInput current (VI=5V) --- --- 0.36 mA
IO(off) Output current (VCC=50V, VI=0) --- --- 0.5
A
GIDC current gain (VO=5V, IO=5mA) 56 --- ---
R1 Input resistance 15.4 22
R2/R1 Resistance ratio 0.8 1.0 1.2
fTTransition frequency
(VCE=10V, IE=5mA, f=100MHz) --- 250 --- MHz
Revision: A 2011/01/01
NPN
28.6 K¡
IO
IC(MAX) Output current --- 30
100 --- mA
SOT-323
Suggested Solder
Pad Layout
INCHES MM
DIM MIN MAX MIN MAX NOTE
A .071 .087 1.80 2.20
B .045 .053 1.15 1.35
C .079 .087 2.00 2.20
D .026 Nominal 0.65Nominal
E .047 .055 1.20 1.40
F .012 .016 .30 .40
G .000 .004 .000 .100
H .035 .039 .90 1.00
J .004 .010 .100 .250
K .012 .016 .30 .40
A
C
B
D
E
F
GH
1.90
.7
0.90
.
0.65
DIMENSIONS
K
1: IN
2: GND
3: OUT
www.mccsemi.com
1 of 2
*Marking: 25
• Lead Free Finish/RoHS Compliant ("P" Suffix designates
RoHS Compliant. See ordering information)
• Epoxy meets UL 94 V-0 flammability rating
• Moisure Sensitivity Level 1
omponents
20736 Marilla Street Chatsworth
!"#
$% !"#
MCC TM
Micro Commercial Components
mm