SMP 1SMP Interface Dimensions SMP Code 19 REFERENCE PLANE REFERENCE PLANE Referenzebene Referenzebene E K I H F G E F A C C B A D D MALE Stecker FEMALE Kuppler SMP Male | Stecker dimension [mm] Smooth bore Female | Kuppler Limited detent Full detent min. max. min. max. min. max. min. A 0.356 0.406 0.356 0.406 0.356 0.406 1) B 3.125 3.225 2.998 3.098 2.896 2.996 C 3.531 3.683 3.531 3.683 3.531 3.683 1) 3.125 3.225 3.125 3.225 0.00 E 2.74 2.84 2.74 2.84 2.74 2.84 0.00 F 1.143 1.397 1.143 1.397 1.143 1.397 3.35 G 0.839 0.939 0.839 0.939 0.839 0.939 H 1.397 1.447 1.397 1.447 I 1.982 2.082 1.982 2.082 K 2.185 2.285 2.185 2.285 D max. 3.43 0.20 1) resilient, dimension to meet electrical and mechanical requirements SMP coaxial connectors are available as smooth bore, catchers mitt, limited detent and full detent versions, they are suitable for a wide range of board-to-board interconnect applications up to 40 GHz - from low up to the highest mechanical loads, e. g. in telecommunication, test & measurement or aerospace applications. PCB connectors are supplied in blister tapes. SMP-Koaxial-Steckverbinder werden in den Festhaltevarianten Smooth bore, Catchers mitt, Limited detent und Full detent angeboten und eignen sich fur vielseitige Board-toBoard-Verbindungen bis 40 GHz von geringer bis zu hochster mechanischer Beanspruchung, z. B. in Telekom- und Messtechnik-Anwendungen bis zu Anwendungen in Luftund Raumfahrt. PCB-Steckverbinder werden in Blistergurt-Verpackungen ausgeliefert. Features Interface according to US MIL-STD 348A, Fig. 326 Frequency range DC to 40 GHz Return loss (cable connector straight) 14 dB (typ.) Impedance 50 Minimum board-to-board distance 9.05 mm Snap-on coupling 26 Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com SMP Longwipe-SMP Mini-SMP SMP Technology Technical Data SMP Code 19 Applicable standards | Anwendbare Normen Interface according to | Interface gema MIL-STD-348A, Fig. 326 Quality tested according to | Qualitatsprufung gema MIL-STD-202 Electrical data | Elektrische Daten Impedance | Wellenwiderstand 50 Frequency range | Frequenzbereich DC to 40 GHz Return loss (cable connector straight) | Ruckflussdampfung (Kabelsteckverbinder gerade) 14 dB (typ.) Insertion loss | Dampfung 0.1 x f (GHz) dB Insulation resistance | Isolationswiderstand 5 G Center contact resistance | Ubergangswiderstand Innenleiter 6 m Outer contact resistance | Ubergangswiderstand Auenleiter 2 m Test voltage | Prufspannung 500 V rms Working voltage | Betriebsspannung 335 V rms Power handling | Leistungsbelastbarkeit 65 W @ 2.2 GHz Contact current | Kontaktstrombelastbarkeit 1.2 A DC Mechanical data | Mechanische Daten Mating cycles | Steckzyklen Full detent: 100 Limited detent: 500 Smooth bore, Catchers mitt: 1000 Center contact captivation | Innenleiter Haltekraft axial: 7 N Engagement force | Steckkraft Full detent: 68 N Limited detent: 45 N Smooth bore, Catchers mitt: 9 N Disengagement force | Ziehkraft Full detent: 22 N Limited detent: 9 N Smooth bore, Catchers mitt: 2.2 N Board-to-board distance (min.) | Board-to-Board Abstand (min.) 9.05 mm Environmental data | Umweltdaten Temperature range | Temperaturbereich -65 C to +155 C Thermal shock | Temperaturzyklen MIL-STD-202, Method 107, Condition B Moisture resistance | Feuchtigkeitsbestandigkeit MIL-STD-202, Method 106 Vibration | Vibration MIL-STD-202, Method 204, Condition B Shock | Schock MIL-STD-202, Method 213, Condition A Max. soldering temperature (PCB connectors) | Max. Lottemperatur (Leiterplattensteckverbinder) IEC 61760-1, +260 C for 10 sec. Materials | Materialien Spring loaded contact parts | Federnde Kontaktteile CuBe, Au plating Center contact | Innenleiter CuZn, Au plating Outer contact | Auenleiter CuZn, Au plating Crimping ferrule | Crimphulse Copper alloy, Au plating Dielectric | Dielektrikum Rosenberger-connectors fulfill in principle the indicated data of the Technical Data. Individual values of connectors may deviate depending upon application, design, type of cable, assembly method and execution. Specific data sheets for particular products can be provided on request from your Rosenberger sales partner. PTFE / PEEK / LCP Rosenberger-Steckverbinder erfullen grundsatzlich die in den Technischen Daten angegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -ausfuhrung konnen einzelne Werte von Steckverbindern hiervon abweichen. Spezifische Datenblatter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenberger-Ansprechpartner. Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com 27 SMP Cable Connectors Cable Connectors Semi-Rigid Cables Straight Plug, solder Panel mount; hexagonal flange Semi-Rigid Cables Version Remarks Cable Group Assembly Instruction Panel Piercing Packing / PCB Layout Unit x19 S 601-271 L5 rear mount Limited detent 71 19 E4 B 54 100 x19 S 641-271 L5 rear mount Smooth bore 71 19 E4 B 54 100 9.9 5.7 2.3 o 3.7 10-48 UNS-2A xOrdering Number SW 6.35 Snap-in Limited detent 71 19 E4 4.8 + 0.03 100 9.9 o3 o 4.8 x19 S 602-271 L5 SW 6.35 2.5 6.1 front mount Limited detent stainless steel 71 19 E4 B 279 100 9.4 o3 x19 S 60A-271 L5 SW 6.3 SW 6.3 Straight Jack, solder Semi-Rigid Cables Remarks Cable Group Assembly Instruction Packing Unit x19 K 101-270 L5 26.5 GHz 70 19 E5 100 x19 K 107-270 L5 40 GHz 70 19 E13 100 x19 K 101-271 L5 26.5 GHz 71 19 E5 100 x19 K 107-271 L5 40 GHz 71 19 E13 100 x19 K 101-272 L5 26.5 GHz 72 19 E4 100 6.4 3.4 o4 xOrdering Number 12 o5 3.4 Right Angle Jack, solder Semi-Rigid Cables Remarks Cable Group Assembly Instruction Packing Unit x19 K 202-270 L5 26.5 GHz 70 19 E8 250 x19 K 202-271 L5 26.5 GHz 71 19 E8 500 6.6 5.15 o 4.9 xOrdering Number 28 Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com SMP Longwipe-SMP Mini-SMP SMP Cable Connectors - Flexible Cables Straight Jack, crimp Flexible Cables Remarks Cable Group Assembly Instruction Crimp Inserts Packing Unit x19 K 102-101 L5 a = 15.7 mm 01 19 C2 11 W 150-402 100 x19 K 101-102 L5 a = 16.5 mm 02 59 G2 11 W 150-402 100 x19 K 101-103 L5 a = 16.5 mm 03 59 G2 11 W 150-403 100 x19 K 102-1X1 L5 a = 15.7 mm X1 19 C2 11 W 150-402 100 a 8.7 o5 xOrdering Number Right Angle Jack, solder-crimp Flexible Cables Remarks Cable Group Assembly Instruction Crimp Inserts Packing Unit x19 K 202-301 L5 a = 4.05 mm 01 19 C1 11 W 150-102 100 x19 K 201-302 L5 a = 3.85 mm 02 19 C 11 W 150-102 100 x19 K 201-303 L5 a = 4.3 mm 03 19 C 11 W 150-103 100 6.9 5.1 3.4 11 xOrdering Number oa x19 K 203-3X1 L5 X1 19 C1 11 W 150-102 100 7.4 5.65 11 3.9 o 4.05 Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com 29 SMP Panel Connectors Panel Connectors - Coaxial End Panel Plug, hexagonal flange Coaxial End xOrdering Number Remarks Packing Unit x19 S 601-500 L5 Limited detent Panel feed through 100 blister 17.7 6 o 1.5 10-56 UNS-2A 9.8 SW 6 Panel Plug, hermetic sealed Coaxial End xOrdering Number Remarks Assembly Instruction Packing Unit x19 S 181-5H0 E4 Full detent 19 G 100 4.32 1.27 Panel Jack Coaxial End xOrdering Number Panel Piercing / PCB Layout Packing Unit x19 K 101-500 L5 M 4.5 x 0.35 100 9.7 o 1.1 M 4.5 x 0.35 1.8 SW 4 30 SW 6 Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com SMP Longwipe-SMP Mini-SMP SMP PCB Connectors PCB Connectors - SMD SMD Panel Piercing Packing / PCB Layout Packing Unit x19 S 101-40M L5 Limited detent B 120 VG 01.01M00 100 blister, 1500 tape & reel x19 S 10H-40M L5 Limited detent removable plastic cap on suction area for tape & reel B 120 VG 28.01M00 100 blister, 1500 tape & reel x19 S 141-40M L5 Smooth bore B 120 VG 01.01M00 100 blister, 1500 tape & reel x19 S 14H-40M L5 Smooth bore removable plastic cap on suction area for tape & reel B 120 VG 01.01M00 1500 tape & reel x19 S 102-40M L5 Limited detent removable plastic cap on suction area for tape & reel Frequency DC to 40 GHz please request optimized footprint for your application VG 01.01M00 100 blister, 1500 tape & reel x19 S 122-40M L5 Limited detent, stainless steel removable plastic cap on suction area for tape & reel Frequency DC to 40 GHz please request optimized footprint for your application x19 S 144-40M L5 Catchers mitt B 127 VG 23.75000 100 blister, 750 tape & reel x19 S 14K-40M L5 Catchers mitt removable plastic cap on suction area for tape & reel B 127 VG 05.75000 750 tape & reel x19 S 104-40M L5 Limited detent, a = 0 mm B 126 VG 24.01M00 100 blister, 1500 tape & reel x19 S 10K-40M L5 Limited detent, a = 0 mm removable plastic cap on suction area for tape & reel B 126 VG 29.01M00 1500 tape & reel Limited detent, a = 0.8 mm removable plastic cap on suction area for tape & reel B 123 100 blister 4.5 a 4.1 4.1 o6 200 blister o 0.7 5 x19 S 103-500 L5 pin-in-paste Limited detent, a = 2.5 mm B 123 x19 S 103-400 L5 pin-in-paste Limited detent B 122 VG 33.01M00 100 blister, 750 tape & reel x19 S 10A-400 L5 pin-in-paste Limited detent removable plastic cap on suction area for tape & reel B 122 VG 05.50000 100 blister, 500 tape & reel x19 S 143-400 L5 pin-in-paste Smooth bore B 122 VG 33.01M00 100 blister, 750 tape & reel x19 S 147-400 L5 pin-in-paste Smooth bore B 122 VG 33.01M00 100 blister, 750 tape & reel x19 S 14D-400 L5 pin-in-paste Smooth bore removable plastic cap on suction area for tape & reel B 122 VG 05.50000 500 tape & reel 6.6 200 blister 2.5 pin-in-paste 5 4.4 Remarks x19 S 106-500 L5 Version 4.1 Straight Plug xOrdering Number 6 2.5 6.6 o 4.7 6 Straight Plug, Panel mount SMD Remarks Panel Piercing Packing / PCB Layout Packing Unit x19 S 10D-40M L5 rear mount Limited detent B 121 VG 19.01M00 100 blister, 1250 tape & reel x19 S 10N-40M L5 rear mount Limited detent removable sticker on suction area for tape & reel B 121 VG 19.01M00 1250 tape & reel o 4.2 6 Version 5.3 xOrdering Number 6 Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com 31 SMP Straight Jack/Plug Pair SMD xOrdering Number Remarks Panel Piercing / PCB Layout Packing Unit x19 K 10M-40M G Limited detent incl. 19S101-40M , 19K102-K00 B 120 100 blister 5 8.3 o 4.2 SMD Remarks Panel Piercing Packing / PCB Layout Packing Unit x19 S 201-40M L5 Limited detent removable sticker on suction area for tape & reel B 124 VG 22.01M00 200 blister, 1500 tape & reel x19 S 241-40M L5 Smooth bore removable sticker on suction area for tape & reel B 124 VG 144.01M00 200 blister, 1500 tape & reel 5 Right Angle Plug, PCB xOrdering Number 4.1 5.1 B 125 Smooth bore VG 03.01M00 B 125 VG 03.01M00 100 blister, 1500 tape & reel 7.4 3 4 200 blister, 1500 tape & reel 5 x19 S 242-40M L5 Limited detent 4 x19 S 202-40M L5 1.6 PCB Connectors - Solder Pin Straight Plug, PCB Solder Pin xOrdering Number Remarks Panel Piercing Packing / PCB Layout Packing Unit x19 S 102-400 L5 Limited detent B 30 100 blister, 750 tape & reel 3 7.1 VG 32.01M00 6 Smooth bore B 30 VG 32.01M00 100 blister, 750 tape & reel 2.5 6.61 x19 S 145-400 L5 6 Right Angle Plug, PCB Solder Pin xOrdering Number Remarks Panel Piercing / Packing Unit PCB Layout x19 S 201-400 L5 Limited detent B 30 100 blister 8.4 3 6 9 o 4.5 5.4 32 Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com SMP Longwipe-SMP Mini-SMP SMP Adaptors Adaptors Bullet female-female Nominal Board-to- Bullet Length2) Board Distance1) Minimum Board-toBoard Distance3) Maximum Radial Packing Tolerance4) Unit x19 K 101-K00 L5 9.30 mm a=6.45 mm 9.07 mm 0.45 mm 100 x19 K 102-K00 L5 9.85 mm a=7.00 mm 9.62 mm 0.49 mm 100 x19 K 110-K00 L5 11.05 mm a=8.20 mm 10.82 mm 0.57 mm 100 x19 K 106-K00 L5 11.45 mm a=8.60 mm 11.22 mm 0.60 mm 500 x19 K 109-K00 L5 12.75 mm a=9.90 mm 12.52 mm 0.69 mm 500 x19 K 108-K00 L5 14.25 mm a=11.40 mm 14.02 mm 0.80 mm 500 x19 K 114-K00 L5 15.44 mm a=12.59 mm 15.21 mm 0.88 mm 500 x19 K 104-K00 L5 19.59 mm a=16.74 mm 19.36 mm 1.17 mm 500 x19 K 115-K00 L5 22.35 mm a=19.50 mm 22.12 mm 5) 300 x19 K 117-K00 L5 25.24 mm a=22.39 mm 25.01 mm 5) 300 x19 K 107-K00 L5 26.65 mm a=23.80 mm 26.42 mm 5) 300 x19 K 116-K00 L5 27.04 mm a=24.19 mm 26.81 mm 5) 300 1) 2) 3) 4) 5) a o 3.43 xOrdering Number When standard SMD-connectors are applied (e.g. 19 S 101-40M, 19 S 144-40M, ...). Bullets with special lengths on request. Applying radial misalignment increases the minimum board-to-board distance in vertical direction by max. 0.2 mm. Please note: Solder paste thickness not included. The maximum radial tolerance compensation is calculated by: sin(4) x bullet length. Please note that the maximum possible misalignment of the axes to each other, as well as the maximum capture area of the PCB connectors (smooth bore types) have an impact on the quality and performance of the high frequency connection. The maximum radial tolerance is limited to 1.2 mm because of the limited guide in range of the second PCB connector. Adaptors (In Series) Version Remarks Return Loss x19 S 101-S20 D3 straight SMP male - male calibration adaptor 26 dB @ DC to 4 GHz 20 dB @ 4 GHz to 18 GHz x19 S 101-K20 D3 straight SMP male - female calibration adaptor 26 dB @ DC to 4 GHz 20 dB @ 4 GHz to 18 GHz SMP female - female calibration adaptor 26 dB @ DC to 4 GHz 20 dB @ 4 GHz to 18 GHz 23.4 o7 xOrdering Number o7 20.6 straight 17.8 o7 x19 K 101-K20 D3 Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com 33 SMP Adaptors (Inter Series) xOrdering Number Version Remarks x19 S 132-S00 S3 straight SMP male - SMA male Return Loss o9 24 SW8 SW8 x19 S 132-K00 S3 straight SMP male - SMA female o9 23.1 SW8 SW8 x19 K 132-S00 D3 straight SMP female - SMA male o9 26 SW8 x19 K 132-K00 D3 straight SW8 SMP female - SMA female o9 25.1 SW8 straight RPC-2.92 male - SMP male 32 dB @ DC to 12 GHz 26 dB @ 12 GHz to 26.5 GHz 21 dB @ 26.5 GHz to 40 GHz 26.8 o9 x02 S 119-S00 E3 SW8 SW8 SW8 straight RPC-2.92 male - SMP female 32 dB @ DC to 12 GHz 26 dB @ 12 GHz to 26.5 GHz 21 dB @ 26.5 GHz to 40 GHz 30 o9 x02 S 119-K00 E3 SW7 SW7 SW8 straight RPC-2.92 female - SMP male 32 dB @ DC to 12 GHz 26 dB @ 12 GHz to 26.5 GHz 21 dB @ 26.5 GHz to 40 GHz 31.8 o9 x02 K 119-S00 E3 SW8 straight RPC-2.92 female - SMP female 32 dB @ DC to 12 GHz 26 dB @ 12 GHz to 26.5 GHz 21 dB @ 26.5 GHz to 40 GHz 29 o9 x02 K 119-K00 E3 SW7 SW8 straight panel RPC-3.50 female - SMP male, full detent, 2-hole flange, floating test adaptor 30 dB @ DC to 12 GHz 20 dB @ 12 GHz to 26.5 GHz 24.7 o 20 x03 K 719-S22 S3 SW7 SW8 34 SW6 Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com SMP Longwipe-SMP Mini-SMP SMP Terminations Terminations Termination Plug xOrdering Number Remarks Return Loss Packing Unit x19 S 15R-001 E4 1 Watt Frequency: DC to 18 GHz 28.3 dB @ DC to 1 GHz 20.1 dB @ 1 GHz to 18 GHz 1 xOrdering Number Remarks Return Loss Packing Unit x19 K 15R-001 E4 1 Watt Frequency: DC to 18 GHz 28.3 dB @ DC to 1 GHz 20.1 dB @ 1 GHz to 18 GHz 1 o5 11.5 Termination Jack o5 8.7 Tools Special Tools Extraction Tool xOrdering Number Remarks Packing Unit x19 W 002-000 for SMP connectors 1 120 Soldering Gauge Remarks Packing Unit x11 W 115-000 for SMP connectors width of soldering gauge: a = 0.6 mm, thickness = 0.5 mm 1 a xOrdering Number Rosenberger Hochfrequenztechnik GmbH & Co. KG, P.O. Box 1260, D-84526 Tittmoning, Tel. +49-86 84-18-0, Fax. +49-86 84-18-499, www.rosenberger.com 35