19-0309; Rev 3; 11/07 TTL Compatible CMOS Analog Switches Features Maxim's DG300-DG303 and DG300A-DG303A CMOS dual and quad analog switches combine low power operation with fast switching times and superior DC and AC switch characteristics. On-resistance is less than 50 and is essentially constant over the analog signal range. Device specifications are ideal for batterypowered circuitry. Monolithic Low-Power CMOS These switches are available in a variety of formats as outlined in the Pin Configurations section. The switch control logic inputs are fully TTL and CMOS compatible. Also featured are "break-before-make" switching and low charge injection. Maxim's DG300-DG303 and DG300A-DG303A families are electrically compatible and pin compatible with the original manufacturer's devices. All devices operate with power supplies ranging from 5V to 18V. Single-supply operation is implemented by connecting V- to GND. V+ to V- Analog Signal Range Applications Latchup Proof Construction Fully Compatible 2nd Source Low On-Resistance, <50 Fast Switching Time Single-Supply Capability Ordering Information PART TEMP RANGE 0C to +70C Dice DG300CJ 0C to +70C 14 Lead Plastic DIP DG300CWE 0C to +70C 16 Lead Wide SO 0C to +70C 14 Lead CERDIP DG300CK Portable Instruments PIN-PACKAGE DG300C/D DG300BWE -25C to +85C 16 Lead Wide SO Low-Power Sample/Holds DG300BK -25C to +85C 14 Lead CERDIP Power-Supply Switching DG300BA -25C to +85C 10 Lead Metal Can Programmable Gain Amplifiers DG300AK -55C to +125C 14 Lead CERDIP SPDT and DPDT Functions DG300AA -55C to +125C 10 Lead Metal Can Process Control and Telemetry Ordering Information continued at end of data sheet. Pin Configurations DUAL SPST DG300/DG300A V+ (SUBSTRATE AND CASE) N.C. 1 D1 10 D1 2 1 9 D2 8 S2 N.C. 3 S1 2 S1 4 7 IN2 N.C. IN1 3 5 4 6 IN1 6 5 N.C. VGND 7 GND DUAL DPST DG302/DG302A 14 V+ 13 D2 12 N.C. 11 S2 10 N.C. 9 IN2 8 V- N.C. S3 D3 D1 S1 IN1 GND LOGIC SWITCH 0 OFF 1 ON 1 2 3 4 5 6 7 14 V+ 13 S4 12 D4 11 D2 10 S2 9 IN2 8 V- LOGIC SWITCH 0 OFF 1 ON SPDT DG301/DG301A V+ (SUBSTRATE AND CASE) N.C. 1 D1 D2 10 D1 2 1 9 S1 2 8 S2 N.C. 3 S1 4 7 N.C. N.C. IN 3 5 IN 6 N.C. 4 5 6 VGND GND 7 LOGIC SWITCH 1 SWITCH 2 ON OFF 0 OFF ON 1 DUAL SPDT DG303/DG303A 14 V+ 13 D2 12 N.C. 11 S2 10 N.C. 9 N.C. 8 V- N.C. S3 D3 D1 S1 IN1 GND 1 2 3 4 5 6 7 14 V+ 13 S4 12 D4 11 D2 10 S2 9 IN2 8 V- LOGIC SWITCHES 1, 2 SWITCHES 3, 4 0 OFF ON 1 ON OFF SWITCH STATES ARE FOR LOGIC "1" INPUTS (POSITIVE LOGIC). ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 DG300(A)/DG301(A)/DG302(A)/DG303(A) General Description ABSOLUTE MAXIMUM RATINGS Voltages Referenced to VV+ (DG300-DG303)...............................................................36V V+ (DG300A-DG303A) ..........................................................44V GND .......................................................................................25V Digital Inputs, VS, VD, (Note 1).......................-4V to (V+ + 4V) or 30mA, whichever occurs first Current, Any Terminal Except S or D ..................................30mA Continuous Current, S or D .................................................30mA (pulsed at 1ms, 10% duty cycle max) ..........................100mA Storage Temperature (A & B suffix)...................-65C to +150C (C suffix) .........................-65C to +125C Operating Temperature (A suffix) ......................-55C to +125C (B suffix) ........................-25C to +85C (C suffix) ...........................0C to +70C Lead Temperature (soldering 10s) ..................................+300C Power Dissipation* Cerdip (K) (derate 11mW/C above +75C) ....................825mW Plastic DIP (J) (derate 6.5mW/C above +25C) .............470mW Metal Can (A) (derate 6mW/C above +75C).................450mW *Device mounted with all leads soldered or welded to PC board. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (V+ = +15V, V- = -15V, GND = 0V, TA = +25C, unless otherwise noted.) PARAMETER SYMBOL TEST CONDITIONS DG300-DG303A DG300A-DG303AA TYP MAX MIN INPUT SWITCH (Note 2) (Note 3) DYNAMIC DG300(A)/DG301(A)/DG302(A)/DG303(A) TTL Compatible CMOS Analog Switches Analog Signal Range Drain-Source ON-Resistance Source OFFLeakage Current Drain OFFLeakage Current Drain ONLeakage Current Input Current/ Voltage High Input Current/ Voltage Low Turn-ON Time Turn-OFF Time Break-Before-Make Interval Charge Injection Source OFFCapacitance Drain OFFCapacitance Channel ONCapacitance Input Capacitance Off-Isolation (Note 4) Crosstalk (Channel-to-Channel) 2 VANALOG IS = 10mA, VIN = 0.8V or 4.0V IS = -10mA, VD = 10V RDS(ON) IS = -10mA, VD = -10V VS = 14V, VD = -14V IS(OFF) VIN = 0.8V VS = -14V, VD = 14V or VS = -14V, VD = 14V VIN = 0.8V ID(OFF) VS = 14V, VD = -14V VD = VS = 14V ID(ON) VD = VS = -14V VIN = 5.0V IINH VIN = 15V IINL VIN = 0V tON tOFF See Switching Time Test Circuit tON - tOFF Q CS(OFF) CD(OFF) CD(ON) + CS(ON) CIN -1 -1 -2 -1 -1 See Break-Before-Make Time Test Circuit, DG301(A)/DG303(A) only CL = 10nF, RGEN = 0, VGEN = 0V VS = 0V f = 1MHz, VIN = 0.8V VD = 0V or VIN = 4.0V VS = VD = 0V f = 1MHz -15 VIN = 0V VIN = 15V VIN = 0V, RL = 1k VS = 1VRMS, f = 500kHz 30 30 0.1 -0.1 0.1 -0.1 0.1 -0.1 -0.001 0.001 (Note 2) (Note 3) +15 50 50 1 -15 -5 1 -5 2 -5 -1 1 -0.001 150 130 DG300-DG303B/C DG300A-DG303AB/C UNITS MIN TYP MAX -1 300 250 30 30 0.1 -0.1 0.1 -0.1 0.1 -0.1 -0.001 0.001 +15 50 50 5 5 5 1 -0.001 150 130 V nA nA nA A A 300 250 ns ns 50 50 ns 12 12 pC 14 14 pF 14 14 pF 40 40 pF 6 7 62 6 7 62 dB 74 74 dB _______________________________________________________________________________________ pF TTL Compatible CMOS Analog Switches (V+ = +15V, V- = -15V, GND = 0V, TA = +25C, unless otherwise noted.) PARAMETER SYMBOL TEST CONDITIONS DG300-DG303A DG300A-DG303AA MIN TYP MAX SUPPLY (Note 2) (Note 3) Positive Supply Current Negative Supply Current Positive Supply Current Negative Supply Current I+ I- VIN = 4V (one input) (all others = 0) 0.23 -10 I+ (Note 2) (Note 3) 0.5 -0.001 0.001 DG300-DG303B/C DG300A-DG303AB/C UNITS MIN TYP MAX 0.23 -10 10 0.5 -0.001 0.001 mA A 10 A VIN = 0.8V (all inputs) I- -10 -0.001 -10 -0.001 A ELECTRICAL CHARACTERISTICS (Over Temperature) (V+ = +15V, V- = -15V, GND = 0V, TA = Over Temperature Range, unless otherwise noted.) PARAMETER SYMBOL TEST CONDITIONS DG300-DG303A DG300A-DG303AA TYP MAX MIN DYNAMIC SUPPLY INPUT SWITCH (Note 2) (Note 3) Analog Signal Range Drain-Source ON-Resistance Source OFFLeakage Current Drain OFFLeakage Current Drain ONLeakage Current Input Current/ Voltage High Input Current/ Voltage Low Positive Supply Current Negative Supply Current Positive Supply Current Negative Supply Current Turn-ON Time VANALOG IS = -10mA, VIN = 0.8V or 4.0V IS = -10mA, VD = 10V RDS(ON) IS = -10mA, VD = -10V VS = 14V, VD = -14V IS(OFF) VIN = 0.8V VS = -14V, VD = 14V or VS = -14V, VD = 14V VIN = 0.8V ID(OFF) VS = 14V, VD = -14V VD = VS = 14V ID(ON) VD = VS = -14V VIN = 5.0V IINH VIN = 15V IINL I+ I- VIN = 0V VIN = 4V (one input) (all others = 0) -15 DG300-DG303B/C DG300A-DG303AB/C UNITS MIN TYP MAX (Note 2) (Note 3) +15 75 75 100 -100 -15 -100 100 -100 100 -100 200 -200 -1 200 -200 -10 1 -1 10 -10 1 -100 V nA nA nA A A 1 -200 100 I+ +15 75 75 100 mA mA 200 A VIN = 0.8V (all inputs) -100 ItON -200 A 500 ns 450 ns See Switching Time Test Circuit Turn-OFF Time tOFF _______________________________________________________________________________________ 3 DG300(A)/DG301(A)/DG302(A)/DG303(A) ELECTRICAL CHARACTERISTICS (continued) DG300(A)/DG301(A)/DG302(A)/DG303(A) TTL Compatible CMOS Analog Switches ELECTRICAL CHARACTERISTICS (Over Temperature) (continued) (V+ = +15V, V- = -15V, GND = 0V, TA = Over Temperature Range, unless otherwise noted.) Note 1: Signals on SX, DX, or INX exceeding V+ or V- are clamped by internal diodes. Limit diode forward current to maximum current ratings. Note 2: The algebraic convention whereby the most negative value is a minimum, and the most positive value is a maximum is used in this data sheet. Note 3: Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. Note 4: OFF-isolation = 20 log VS , VS = input to OFF switch, VD = output. VD Typical Operating Characteristics (TA = +25C, unless otherwise noted.) 4 _______________________________________________________________________________________ TTL Compatible CMOS Analog Switches VO RGEN DX SX VO VO CL 10nF VGEN INX +4V INX ON ON OFF 0V VO = MEASURED VOLTAGE ERROR DUE TO CHARGE INJECTION THE ERROR VOLTAGE IN COULOMBS IS Q = CL x VO. Figure 1. Charge Injection Test Circuit LOGIC "1" = SWITCH ON VIHN LOGIC INPUT +15V 50% +4V D1 S2 D2 IN RL2 300 VO2 VS2 = 3V 50% 0V S1 VS1 = 3V VS1 SWITCH OUTPUT SWITCH OUTPUT VO1 V+ 0V VO1 GND LOGIC INPUT VS2 RL1 300 CL2 33pF CL1 33pF V-15V VO2 SWITCH OUTPUT 50% 0V tBBM Figure 2. Break-Before-Make Time Test Circuit SPDT (DG301(A), DG303(A) LOGIC "1" = SWITCH ON LOGIC INPUT tR < 20ns tF < 20ns +15V VIHN V+ +4V 50% 0V S 0 IN RL 300 SWITCH OUTPUT VO VS = 3V VS SWITCH OUTPUT 90% 10% 0V tON LOGIC INPUT GND CL 33pF V-15V tOFF Figure 3. Switching Time Test Circuit _______________________________________________________________________________________ 5 DG300(A)/DG301(A)/DG302(A)/DG303(A) Test Circuits DG300(A)/DG301(A)/DG302(A)/DG303(A) TTL Compatible CMOS Analog Switches Table 1. Typical Single Supply Parameters V+ SUPPLY VOLTAGE (V- = 0V) PARAMETER Switching Time (RL = 1k) On-Resistance +10V +15V +20V +30V tON 190ns 150ns 110ns 70ns tOFF 40ns 40ns 40ns 40ns VSIGNAL = +1V 71 51 42 31 VSIGNAL = V+ / 2 77 54 43 30 VSIGNAL = V+ Input Logic Levels Applications Information All DG300 family switches will operate with 5V to 15V power supplies. They can also be used with single-ended power supplies ranging from +10V to +30V where the Vterminal is connected to ground. In either case, analog signals ranging from V+ to V- can be switched. The on-resistance variation with analog signal and supply voltage is shown in the Typical Operating Characteristics. The temperature coefficient of RON is typically 0.5%/C. Typical on-resistance matching from channel to channel is 10%. In addition, Table 1 outlines some typical parameters for single-supply operation. 84 63 54 43 0.8V, 4.0V 0.8V, 4.0V 0.8V, 4.0V 0.8V, 4.5V Table 2. Charge Injection (15V Supplies) ANALOG INPUT (V) INJECTED Q (pC) +10 4 +5 8 0 12 -5 8 -10 5 The charge injection test circuit is shown in Figure 1. Table 2 lists the typical injected charge for DG300 series switches with various input voltages. Chip Topography b a n m DIE PAD l c 0.106" 2.69mm k d j e f g h i a b c d e f g h i j k l m n DG300 DG300A N.C. D1 N.C. S1 IN1 N.C. GND VIN2 S2 N.C. D2 N.C. V+ DG301 DG301A N.C. D1 S1 N.C. IN1 N.C. GND VN.C. N.C. N.C. S2 D2 V+ 0.108" 2.74mm 6 _______________________________________________________________________________________ DG302/DG303 DG302A/DG303A S3 D3 D1 S1 IN1 N.C. GND VIN2 S2 D2 D4 S4 V+ TTL Compatible CMOS Analog Switches PART TEMP RANGE DG300AC/D 0C to +70C Dice DG302CWE 0C to +70C 16 Lead Wide SO DG300ACJ 0C to +70C 14 Lead Plastic DIP DG302CK 0C to +70C 14 Lead CERDIP DG300ACWE 0C to +70C 16 Lead Wide SO DG302BWE -25C to +85C 16 Lead Wide SO -25C to +85C 14 Lead CERDIP -55C to +125C 14 Lead CERDIP PART TEMP RANGE PIN-PACKAGE PIN-PACKAGE 14 Lead CERDIP DG302BK DG300ABWE -25C to +85C 16 Lead Wide SO DG302AK DG300ABK -25C to +85C 14 Lead CERDIP DG302AC/D 0C to +70C Dice 0C to +70C 14 Lead Plastic DIP DG300ACK 0C to +70C DG300ABA -25C to +85C 10 Lead Metal Can DG302ACJ DG301C/D 0C to +70C Dice DG302ACWE 0C to +70C 16 Lead Wide SO DG301CJ 0C to +70C 14 Lead Plastic DIP DG302ACK 0C to +70C 14 Lead CERDIP DG301CWE 0C to +70C 16 Lead Wide SO DG302ABWE -25C to +85C 0C to +70C 14 Lead CERDIP DG302ABK -25C to +85C 16 Lead Wide SO DG303C/D 0C to +70C Dice 14 Lead Plastic DIP DG301CK 16 Lead Wide SO 14 Lead CERDIP DG301BWE -25C to +85C DG301BK -25C to +85C 14 Lead CERDIP DG303CJ 0C to +70C DG301BA -25C to +85C 10 Lead Metal Can DG303CWE 0C to +70C 16 Lead Wide SO DG301AK -55C to +125C 14 Lead CERDIP DG303CK 0C to +70C 14 Lead CERDIP DG301AA -55C to +125C 10 Lead Metal Can DG303BWE -25C to +85C 16 Lead Wide SO DG301AC/D 0C to +70C Dice DG303BK -25C to +85C 14 Lead CERDIP DG301ACJ 0C to +70C 14 Lead Plastic DIP DG303AK -55C to +125C 14 Lead CERDIP DG301ACWE 0C to +70C 16 Lead Wide SO DG303AC/D 0C to +70C Dice DG301ACK 0C to +70C 14 Lead CERDIP DG303ACJ 0C to +70C 14 Lead Plastic DIP 16 Lead Wide SO DG303ACWE 0C to +70C 16 Lead Wide SO 0C to +70C 14 Lead CERDIP DG301ABWE -25C to +85C DG301ABK -25C to +85C 14 Lead CERDIP DG303ACK DG301ABA -25C to +85C 10 Lead Metal Can DG303ABWE -25C to +85C 16 Lead Wide SO DG302C/D 0C to +70C Dice DG303ABK -25C to +85C 14 Lead CERDIP DG302CJ 0C to +70C 14 Lead Plastic DIP _______________________________________________________________________________________ 7 DG300(A)/DG301(A)/DG302(A)/DG303(A) Ordering Information (continued) Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) PDIPN.EPS DG300(A)/DG301(A)/DG302(A)/DG303(A) TTL Compatible CMOS Analog Switches 8 _______________________________________________________________________________________ TTL Compatible CMOS Analog Switches E DIM A A1 B C e E H L H MAX MIN 0.093 0.104 0.004 0.012 0.014 0.019 0.009 0.013 0.050 0.291 0.299 0.394 0.419 0.050 0.016 SOICW.EPS INCHES N MILLIMETERS MIN 2.35 0.10 0.35 0.23 MAX 2.65 0.30 0.49 0.32 1.27 7.40 7.60 10.00 10.65 0.40 1.27 VARIATIONS: 1 INCHES TOP VIEW DIM D D D D D D A B e FRONT VIEW MIN 0.398 0.447 0.496 0.598 0.697 MAX 0.413 0.463 0.512 0.614 0.713 MILLIMETERS MIN 10.10 11.35 12.60 15.20 17.70 MAX 10.50 11.75 13.00 15.60 18.10 N MS013 16 AA 18 AB 20 AC 24 AD 28 AE C 0-8 A1 L SIDE VIEW PROPRIETARY INFORMATION TITLE: PACKAGE OUTLINE, .300" SOIC APPROVAL DOCUMENT CONTROL NO. 21-0042 REV. B 1 1 _______________________________________________________________________________________ 9 DG300(A)/DG301(A)/DG302(A)/DG303(A) Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) CDIPS.EPS DG300(A)/DG301(A)/DG302(A)/DG303(A) TTL Compatible CMOS Analog Switches 10 ______________________________________________________________________________________ TTL Compatible CMOS Analog Switches REVISION NUMBER REVISION DATE 0 2/88 Initial release -- 1 6/99 Errors in the test limits and pin configuration -- 2 9/04 Fixed Truth Table -- 3 11/07 Correction to pin configuration 1 DESCRIPTION PAGES CHANGED Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 11 (c) 2007 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc. DG300(A)/DG301(A)/DG302(A)/DG303(A) Revision History