DF5A6.8CJE
2004-09-06
1
TOSHIBA Diodes for Protecting against ESD Epitaxial Planar Type
DF5A6.8CJE
Diodes for Protecting against ESD
The mounting of four devices on an ultra-compact package allows
the number of parts and the mounting cost to be reduced.
The zener voltage corresponds to the E24 Series.
Low Terminal capacitance (between Cathode and Anode)
: CT =23pF (typ.)
Maximum Ratings (Ta = 25°C)
Characteristic Symbol Rating Unit
Power dissipation P 100 mW
Junction temperature Tj 150 °C
Storage temperature range Tstg 55~150 °C
Electrical Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min Typ. Max Unit
Zener voltage VZ IZ = 5 mA 6.4 6.8 7.2 V
Dynamic impedance ZZ I
Z = 5 mA 25
Reverse current IR VR = 5 V 0.5 µA
Terminal capacitance
(between Cathode and Anode) CT V
R = 0 V, f = 1 MHz 23 pF
Guaranteed Level of ESD Immunity
Test Condition ESD Immunity Level
IEC61000-4-2
(Contact discharge) ± 25 kV
Criterion: No damage to device elements
Marking Equivalent Circuit
(Top View)
Unit: mm
1.CATHODE 1
2. ANODE
3.CATHODE2
4.CATHODE3
5.CATHODE4
JEDEC
JEITA
TOSHIBA 1-2W1A
Weight: 0.003 g (typ.)
CW
DF5A6.8CJE
2004-09-06
2
CT - VR
1
10
100
012345678
逆電圧 VR (
端子間容量 CT (pF)
REVERSE VOLTAGE VR (V)
TOTAL CAPACITANCE CT (pF)
IZ - VZ
0
0
0
1
10
100
012345678910
ナー電圧 VZ (V)
ツェ電流 IZ (mA)
0.001
0.01
0.1
ZENER VOLTAGE VZ (V)
ZENER CURRENT IZ (mA)
DF5A6.8CJE
2004-09-06
3
The information contained herein is subject to change without notice.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others.
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced
and sold, under any law and regulations.
030619EAA
RESTRICTIONS ON PRODUCT USE