FH39-33S-0.3SHW(10) - Hirose Connector

2013.11②1

1. Low-profile 0.3mm pitch connector with top

and bottom contact

Usable via either its top or bottom contact point, this

connector achieves enhanced freedom in terms of the

product design.

High contact reliability thanks to the spring

terminal structure

Because both top and bottom contact points are spring-

loaded, the contact point adapts to the FPC motion, and

high contact reliability is ensured.

3. Delivered with the actuator open

FPC can be immediately inserted without the need for

the opening of the actuator.

4. Easy FPC insertion

Entry chamfers at all sides of the FPC insertion slot assure

correct insertion and positioning of the FPC.

5. Accepts standard FPC thickness

0.2mm thick standard Flexible Printed Circuit (FPC) can be

used. This is the only ultra-low profile ZIF connector using

standard FPC.

6. Conductive traces on the PCB can run

under the connector

No exposed contacts on the bottom of the connector.

7. Board placement with automatic equipment

Flat upper surface and tape and reel packaging facilitate

vacuum pick-up and placement.

Standard reel packaging contains 5000 connectors.

8. Halogen-free*

(FH39J Series)

*As defined by IEC61249-2-21

Br-900ppm maximum, Cl-900ppm maximum,

Cl + Br combined-1,500ppm maximum

■Features ●Easy FPC insertion

●Completely locked

FPCFPC

actuatoractuator

●Small size (39 pos. shown)

3.45mm

1.1mm

13.9mm(39 pos.)

0.3 mm Pitch, 1.1 mm above the boar d, Top and bottom Contact,

Bac k-Flip actuator Fle xib le Printed Circuit ZIF Connector s

FH39 Series

FH39 Series●0.3 mm Pitch, 1.1 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors

■Specifications

Recommended FPC Thickness: 0.2 ±0.03 mm, Gold plated contact pads

■Ordering information

FH 39 J - 51S - 0.3 SHW (10)

Series name:FH

Series No.:39

Blank :Standard

A :Long actuator type

J :Halogen-free

(Flame retardance UL94V-0).

1 3

25 74 6

Contact pitch:0.3mm

Number of positions

FH39 :25 to 61

FH39A :67

FH39AJ :71

FH39J :25 to 51

Termination type

SHW...SMT horizontal staggered row mount type

Plating specifications

(10)...Standard 5,000 pieces/reel

(99)...500 pieces/reel

Storage

temperature range

Storage

humidity range

-10 to +50°C (Note 2)

Relative humidity 90% max.

(No condensation)

Ratings

Current rating

Voltage rating

0.2 A

30 Vrms AC

Operating

temperature range

Operating

humidity range

-55 to +85°C (Note 1)

Relative humidity 90% max.

(No condensation)

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for a long period prior to mounting and use.

The operating temperature and humidity range covers the non-conducting condition of installed connectors in

storage, shipment or during transportation after board mounting.

Item Specification Conditions

1.Insulation resistance

2.Withstanding voltage

3.Contact resistance

4.Durability

5.Vibration

6.Shock

7.Humidity

(Steady state)

8.Temperature cycle

9.Resistance to

soldering heat

50 Mø min.

No flashover or insulation breakdown

100 mø max.

* Including FPC and FFC conductor resistance

Contact resistance: 100 mø max.

No damage, cracks, or parts dislocation

No electrical discontinuity of 1μs or longer

Contact resistance: 100 mømax.

No damage, cracks, or parts dislocation

No electrical discontinuity of 1μs or longer

Contact resistance: 100 mømax.

No damage, cracks, or parts dislocation

Contact resistance: 100 mø max.

Insulation resistance: 50 Mø min.

No damage, cracks, or parts dislocation

Contact resistance: 100 mø max.

Insulation resistance: 50 Mø min.

No damage, cracks, or parts dislocation

No deformation of components affecting

performance

100 V DC

90 Vrms AC / 1 minute

1 mA, AC max (AC: 1kHz)

10 cycles

Frequency: 10 to 55 Hz,

single amplitude of 0.75 mm,

10 cycles in each of the 3 axis

Acceleration of 981m/s2, 6 ms duration,

sine half-wave, 3 cycles in each of the 3 axis

96 hours at 40ç and humidity of 90 to 95%

Temperature:-55ç➝+15ç to +35ç➝+85ç➝+15ç to +35ç

Time: 30➝2 to 3 ➝30➝2 to 3 minutes

5 cycles

Reflow: At the recommended temperature profile

Manual soldering: 350ç ± 5ç for 5 seconds

Part Material Finish Remarks

Insulator LCP Color:Beige UL94V-0

PA Color:Black

Contacts Phosphor bronze Gold plated -----------------

Metalfittings Pure tin reflow plated -----------------

■Materials

FH39 Series●0.3 mm Pitch, 1.1 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors

■Connector Dimensions

All dimensions: mm

Tape and reel packaging (5,000 pieces/reel, 500 pieces/reel).

Order by number of reels.

Part Number

FH39-25S-0.3SHW(10)

FH39-27S-0.3SHW(10)

FH39-29S-0.3SHW(10)

FH39-33S-0.3SHW(10)

FH39-39S-0.3SHW(10)

FH39-45S-0.3SHW(10)

FH39-51S-0.3SHW(10)

FH39-61S-0.3SHW(10)

FH39A-67S-0.3SHW(10)

FH39AJ-71S-0.3SHW(10)

FH39J-25S-0.3SHW(10)

FH39J-33S-0.3SHW(10)

FH39J-39S-0.3SHW(10)

FH39J-45S-0.3SHW(10)

FH39J-51S-0.3SHW(10)

580-1806-8-10

580-1805-5-10

580-1807-0-10

580-1803-0-10

580-1800-1-10

580-1802-7-10

580-1801-4-10

580-1808-3-10

580-1809-6-10

580-1816-1-10

580-1815-9-10

580-1814-6-10

580-1813-3-10

580-1811-8-10

580-1812-0-10

9.7

10.3

10.9

12.1

13.9

15.7

17.5

20.5

22.3

23.5

9.7

12.1

13.9

15.7

17.5

6.6

7.2

7.8

10.8

12.6

14.4

17.4

19.2

20.4

6.6

10.8

12.6

14.4

7.2

7.8

8.4

9.6

11.4

13.2

19.8

7.2

9.6

11.4

13.2

7.83

8.43

9.03

10.23

12.03

13.83

15.63

18.63

20.43

21.63

7.83

10.23

12.03

13.83

15.63

9.15

9.75

10.35

11.55

13.35

15.15

16.95

19.95

21.75

22.95

9.15

11.55

13.35

15.15

16.95

CL No. Number of contacts A B C D E

Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.

2 : Packaged on tape and reel only. Check packaging specification.

3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.

4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.

A±0.15

B±0.1

0.6±0.1

0.3±0.1

(0.12)

C±0.1

0.6±0.1

3.55±0.2

(1.85)

(0.12)

(D)

(0.15)

E±0.1

(0.6)

(3.3)

Production LOT No.

0.10.1 1

(90˚)

(3.85)

(0.85)

(1.55)

(2.1)

0.47±0.1

0.1±0.15 3.25±0.15 0.1±0.15

0.3±0.1

(0.42) (FPC:t0.2mm)

1.1±0.1

(1.54)

B Detailed drawing

[FH39 Series]

(90˚)

(4.15)

(0.85)

(1.55)

(2.1)

0.47±0.1

0.1±0.15 3.25±0.15 0.1±0.15

0.3±0.1

(0.42) (FPC:t0.2mm)

1.1±0.1

(1.89)

0.10.1

B Detailed drawing

[FH39A Series]

FH39 Series●0.3 mm Pitch, 1.1 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors

B±0.05

0.6±0.05

0.3±0.03

C±0.05

0.3±0.03 0.6±0.05

0.8±0.05

0.35±0.05

(3.65)

0.67±0.05 0.5±0.05

(Metal mask:0.42)

(Metal mask:0.57)

0.1±0.05 1±0.05

0.3±0.05

(0.2)

(0.1)

2.48±0.05

(Metal mask:0.25)

(Metal mask:0.35)

(Metal mask:1)

Recommended

metal mask thickness : t=0.1

2-R0.2

F±0.05

C±0.03

0.6±0.02

0.3±0.02

0.3±0.07 0.3±0.07

0.3

0.1

0.2

B±0.030.6±0.07 0.6±0.07

0.3±0.1

1.05±0.1

1.15±0.1

2.1±0.1

2.25±0.1

2.65±0.3

3.65MIN (Stiffner)

∞

(1)

0.2±0.03

0.1±0.02

+0.04

-0.03

0.3+0.04

-0.03

(Uncovered area)

■Recommended PCB mounting pattern and metal mask dimensions

■Recommended FPC Dimensions

All dimensions: mm

Part Number

FH39-25S-0.3SHW(10)

FH39-27S-0.3SHW(10)

FH39-29S-0.3SHW(10)

FH39-33S-0.3SHW(10)

FH39-39S-0.3SHW(10)

FH39-45S-0.3SHW(10)

FH39-51S-0.3SHW(10)

FH39-61S-0.3SHW(10)

FH39A-67S-0.3SHW(10)

FH39AJ-71S-0.3SHW(10)

FH39J-25S-0.3SHW(10)

FH39J-33S-0.3SHW(10)

FH39J-39S-0.3SHW(10)

FH39J-45S-0.3SHW(10)

FH39J-51S-0.3SHW(10)

580-1806-8-10

580-1805-5-10

580-1807-0-10

580-1803-0-10

580-1800-1-10

580-1802-7-10

580-1801-4-10

580-1808-3-10

580-1809-6-10

580-1816-1-10

580-1815-9-10

580-1814-6-10

580-1813-3-10

580-1811-8-10

580-1812-0-10

6.6

7.2

7.8

10.8

12.6

14.4

17.4

19.2

20.4

6.6

10.8

12.6

14.4

CL No. Number of contacts B

7.2

7.8

8.4

9.6

11.4

13.2

19.8

7.2

9.6

11.4

13.2

7.8

8.4

10.2

13.8

15.6

18.6

20.4

21.6

7.8

10.2

13.8

15.6

* Stiffener dimension should be 3.65mm min., and X dimension should be 0.5mm for improved flexibility of FPC.

FH39 Series●0.3 mm Pitch, 1.1 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors

■Recommended FPC construction

1. Using Single-sided FPC FPC : Flexible Printed Circuit

Material Name

Surface treatment

Copper foil

Base adhesive

Base film

Reinforcement material adhesive

Stiffener

Material

Material Thickness

(μm)

Cu 1oz

Thermosetting adhesive

Polyimide 1 mil thick

Thermosetting adhesive

Polyimide 3 mil thick

Total

0.2μm thick gold plated over 1 to 5μm

nickel underplating

Covering film layer

Cover adhesive Polyimide 1 mil thick.

203

(25)

Copper foil

Cover adhesive

Covering film layer

Reinforcement material adhesive

Stiffener

2. Using Double-sided FPC FPC : Flexible Printed Circuit

Covering film layer

Cover adhesive

Surface treatment

Through-hole copper

Copper foil

Base adhesive

Base film

Base adhesive Cu 1/2oz

Thermosetting adhesive

Polyimide 1 mil thick.

Thermosetting adhesive

Polyimide 3 mil thick

Total

(18)

197

Polyimide 1 mil thick.

Cu 1/2oz

Thermosetting adhesive

Polyimide 1 mil thick

Thermosetting adhesive

(25)

Material Name Material

Material Thickness

(μm)

* To prevent release of the FPC due to its bending, use of the double sided FPC with copper foil on the back side is not

recommended.

1: This specification is a recommendation for the construction of the FH39 Series FPC (t=0.2±0.03).

2: For details about the construction, please contact the FPC manufacturers.

3. Precautions

0.2μm thick gold plated over 1 to 5μm

nickel underplating

FH39 Series●0.3 mm Pitch, 1.1 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors

■Packaging Specification

●Embossed Carrier Tape Dimensions (Tape width 32mm min.)

●Reel Dimensions

●Embossed Carrier Tape Dimensions (Tape width to 24mm max.)

Ø1.5

(2.1:FH39 series)

(0.3)

8±0.1

2±0.15

4±0.1

(4.65)

G±0.3

J±0.1

(K)

H±0.1

G±0.3

J±0.1 1.75±0.11.75±0.1

(1.85)

1.7

1.5

(2.4:FH39A series)

(K)

Unreeling direction

Flat surface,

for placement with

automatic equipment.

+0.15

+0.1

Ø1.5

+0.1

(Ø13)

(Ø380)

(Ø80)

(L: INSIDE)

(M: OUTSIDE)

FH39 Series●0.3 mm Pitch, 1.1 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors

All dimensions: mm

Part Number

FH39-25S-0.3SHW(10)

FH39-27S-0.3SHW(10)

FH39-29S-0.3SHW(10)

FH39-33S-0.3SHW(10)

FH39-39S-0.3SHW(10)

FH39-45S-0.3SHW(10)

FH39-51S-0.3SHW(10)

FH39-61S-0.3SHW(10)

FH39A-67S-0.3SHW(10)

FH39AJ-71S-0.3SHW(10)

FH39J-25S-0.3SHW(10)

FH39J-33S-0.3SHW(10)

FH39J-39S-0.3SHW(10)

FH39J-45S-0.3SHW(10)

FH39J-51S-0.3SHW(10)

580-1806-8-10

580-1805-5-10

580-1807-0-10

580-1803-0-10

580-1800-1-10

580-1802-7-10

580-1801-4-10

580-1808-3-10

580-1809-6-10

580-1816-1-10

580-1815-9-10

580-1814-6-10

580-1813-3-10

580-1811-8-10

580-1812-0-10

CL No. Number of contacts G

---

28.4

40.4

---

28.4

11.5

14.2

20.2

11.5

14.2

11.6

12.2

13.4

15.2

18.8

21.8

23.6

24.8

13.4

15.2

18.8

25.4

33.4

45.4

25.4

33.4

29.4

37.4

49.4

29.4

37.4

FH39 Series●0.3 mm Pitch, 1.1 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors

■Temperature Profile

HRS test condition

Solder method :Reflow, IR/hot air

Environment :Room air

Solder composition :Paste,

96.5%Sn/3.0%Ag/0.5%Cu

(Senju Metal Industry, Co.,

Ltd.'s

Part Number:M705-221CM5-

32-10.5)

Test board :Glass epoxy

25mm∞50mm∞0.8mm thick

Land dimensions :0.3mm∞0.5mm,

0.3mm∞0.67mm

Metal mask :0.25∞0.42, 0.25∞0.57∞0.1mm

thick

The temperature profiles shown are based on the

above

conditions.

In individual applications the actual temperature may

vary,

depending on solder paste type, volume / thickness

and board

size / thickness. Consult your solder paste and

equipment

manufacturer for specific recommendations.

Start

(ç)

Temperature

100

150

200

250

MAX 250ç

Time (Seconds)

25ç (60sec.) (60sec.)

90 sec. to 120 sec.

Preheating Soldering

150ç

200ç

230ç

FH39 Series●0.3 mm Pitch, 1.1 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors

■Connector Operation and Precautions

Operation

1. As delivered

Exercise care when handling connectors. Follow recommendations given below.

Delivered with the actuator open. There is no need to

operate the actuator prior to the insertion of the FPC.

2. FPC insertion

Align the FPC perpendicular with the connector and insert

it firmly all the way.

The actuator is open when delivered in

the embossed tape packaging

The actuator is open when delivered in

the embossed tape packaging

Rotate

Excessive force after the actuator is already closed

Push at the center of the actuator.

Do NOT close at the ends.

Rotate (lift)

Do not attempt to open more than 90°

Lift at the center

Do not open (lift) at one end.

Operation

3. Locking

After FPC insertion, rotate the actuator down to a full stop, pushing it at the center.

4. FPC removal (Lock release)

Carefully rotate the actuator up to 90°, lifting it at the center.

* The actuator opens by rotating it in the direction opposite to the direction of the insertion of the FPC.

do not attempt to open it from the same side as the insertion of the FPC.

FH39 Series●0.3 mm Pitch, 1.1 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors

Precautions when mounting connectors on the PCB

Other precautions

◆When hand soldering:

Do not perform hand soldering with the FPC inserted in the connector.

• Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.

• Do not use excessive amount of solder or flux compounds.

Operation of the actuator or contacts may be affected by excessive amounts of solder or flux com-

pounds.

◆Handling before mounting on PCB

Insertion of the FPC or operation of the actuator prior to mounting on the PCB is not recommended.

◆PC board warpage

Minimize the warpage as much as possible. The connector is straight within 0.1 mm max. Make sure

that the mounting area flatness can accept the connector terminals without causing any failure of the

solder joints.

◆Forces on the board

When braking the large PC board into individual boards exercise care not to damage the installed

connectors.

When attaching the boards or other components with the screws make sure that any stresses will not

cause board deflections affecting the mounting areas of the connector.

Connector

PCB

FH39 Series●0.3 mm Pitch, 1.1 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors

The contents of this catalog are current as of date of 11/2013. Contents are subject to change without notice for the purpose of improvements.

6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-K u,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

USA:

HIROSE ELECTRIC (U.S.A.), INC. Headquarters

2688 Westhills Court, Simi Valley, CA 93065-6235

Phone : 1-805-522-7958

Fax : 1-805-522-3217

http://www.hiroseusa.com

HONG KONG:

HIROSE ELECTRIC HONGKONG TRADING CO., LTD.

Unit 1102 A&B, Energy Plaza, 92 Granville Road,

Tsim Sha Tsui East, Kowloon

Phone : 852-2803-5338

Fax : 852-2591-6560

http://www.hirose-hongkong.com.hk

CHINA:

HIROSE ELECTRIC CO., LTD. BEIJING REPRESENTATIVE OFFICE

A1001, Ocean International Center, Building 56# East 4th

Ring Middle Road, Chao Yang District, Beijing, 100025

Phone : 86-10-5165-9332

Fax : 86-10-5908-1381

http://www.hirose-china.com.cn

TAIWAN:

HIROSE ELECTRIC TAIWAN CO., LTD.

103 8F, No.87, Zhengzhou Rd., Taipei

Phone : 886-2-2555-7377

Fax : 886-2-2555-7350

http://www.hirose-taiwan.com.tw

GERMANY:

HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH

Herzog-Carl-Strasse 4 D-73760 Ostfildern

(Scharnhauser Park)

Phone : 49-711-4560-02-1

Fax : 49-711-4560-02-299

http://www.hirose.de

SINGAPORE:

HIROSE ELECTRIC CO., LTD.

10 Anson Road #26-16 International Plaza 079903

Phone : 65-6324-6113

Fax : 65-6324-6123

http://www.hirose-singapore.com.sg

THE NETHERLANDS:

HIROSE ELECTRIC EUROPE B.V.

Hogehillweg #8 1101 CC Amsterdam Z-O

Phone : 31-20-6557460

Fax : 31-20-6557469

http://www.hiroseeurope.com

UK:

HIROSE ELECTRIC EUROPE B.V. UK BRANCH

First Floor, St Andrews House, Caldecotte Lake

Business Park, Milton Keynes MK7 8LE

Phone : 44-1908-369060

Fax : 44-1908-369078

http://www.hirose.co.uk

USA:

HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)

37677 Professional Center Drive, Suite #100C

Livonia, MI 48154

Phone : 1-734-542-9963

Fax : 1-734-542-9964

http://www.hiroseusa.com

USA:

HIROSE ELECTRIC (U.S.A.), INC. North California Office

20400 Stevens Creek Blvd., Ste 250, Cupertino, CA

95014

Phone : 1-408-253-9640

Fax : 1-408-253-9641

http://www.hiroseusa.com

CHINA:

HIROSE ELECTRIC (SHANGHAI) CO., LTD.

1501-02, Cross Tower Building, 318 Fuzhou Road,

Huang Pu District, Shanghai 200001

Phone : 86-21-6391-3355

Fax : 86-21-6335-0767

http://www.hirose-china.com.cn

CHINA:

HIROSE ELECTRIC CO., LTD. SHENZHEN OFFICE

Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre

5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008

Phone : 86-755-8207-0851

Fax : 86-755-8207-0873

http://www.hirose-china.com.cn

KOREA:

HIROSE KOREA CO., LTD.

1261-10, Jeoungwhang-Dong, Shihung-City,

Kyunggi-Do 429-450

Phone : 82-31-496-7000,7124

Fax : 82-31-496-7100

http://www.hirose.co.kr

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Hirose Electric:

FH39-25S-0.3SHW(10) FH39-27S-0.3SHW(10) FH39-29S-0.3SHW(10) FH39-33S-0.3SHW(10) FH39-39S-

0.3SHW(10) FH39-45S-0.3SHW(10) FH39-51S-0.3SHW(10) FH39A-67S-0.3SHW(10) FH39-61S-0.3SHW(10)

FH39J-23S-0.3SHW(10) FH39J-25S-0.3SHW(10) FH39J-33S-0.3SHW(10) FH39J-39S-0.3SHW(10) FH39J-45S-

0.3SHW(10) FH39J-51S-0.3SHW(10) FH39-27S-0.3SHW(99) FH39-25S-0.3SHW(99) FH39-45S-0.3SHW(99)

FH39J-39S-0.3SHW(99) FH39-61S-0.3SHW(99) FH39J-27S-0.3SHW(99) FH39-33S-0.3SHW(99) FH39J-23S-

0.3SHW(99) FH39J-27S-0.3SHW(10) FH39J-33S-0.3SHW(99) FH39J-45S-0.3SHW(99) FH39J-25S-0.3SHW(99)

FH39-39S-0.3SHW(99) FH39J-51S-0.3SHW(99) FH39-51S-0.3SHW(99) FH39-29S-0.3SHW(99) FH39A-67S-

0.3SHW(99)