G3VM-61AR/DR MOS FET Relays DIP Higher power, 2-A switching with a 60-V load voltage, DIP package. Low 80 m ON Resistance. * Continuous load current of 2 A. * Switches minute analog signals. G3VM-61AR/DR * Dielectric strength of 2,500 Vrms between I/O. RoHS compliant Note: The actual product is marked differently from the image shown here. Application Examples Terminal Arrangement/Internal Connections 4 * Communication equipment 3 Mold pin mark OMRON logo * Test & Measurement equipment Model name * Security equipment Pin 1 mark 932 LOT No. * Factory Automation equipment 1 * Power circuit 2 Note: The actual product is marked differently from the image shown here. The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. List of Models Package type Contact form DIP4 1a (SPST-NO) Load voltage (peak value) * Terminals PCB terminals Minimum package quantity Model Number per stick Number per tape and reel G3VM-61AR 60 V Surface-mounting terminals G3VM-61DR G3VM-61DR (TR) 100 --- --- 1,500 * The AC peak and DC value are given for the load voltage. Absolute Maximum Ratings (Ta = 25C) Input Item LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Pulse ON current Connection temperature Dielectric strength between I/O (See note 1.) Operating temperature Storage temperature Soldering temperature Output Symbol IF IFP IF/C VR TJ VOFF IO IO/C Iop TJ VI-O Ta Tstg --- Rating 30 1 -0.3 5 125 60 2 -20 6 125 2500 -40 to +85 -55 to +125 260 Unit mA A mA/C V C V A mA/C A C Vrms C C C Measurement conditions 100 s pulses, 100 pps Ta 25C Ta 25C t = 100 ms, Duty = 1/10 AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Electrical Characteristics (Ta = 25C) Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.18 1.33 1.48 Reverse current IR ----10 Capacity between terminals CT --70 --Trigger LED forward current IFT --0.5 3 Maximum resistance with output ON RON --80 200 Current leakage when the relay is open ILEAK ----1.0 Capacity between terminals COFF --250 --Capacity between I/O terminals CI-O --0.8 --Insulation resistance between I/O terminals RI-O 1000 ----Turn-ON time tON --0.8 5 Turn-OFF time tOFF --0.3 1 Output 1 Unit V A pF mA m A pF pF M ms ms Measurement conditions IF = 10 mA Note: VR = 5 V V = 0, f = 1 MHz IO = 1 A IF = 5 mA, IO = 2 A, t < 1s VOFF = 60 V V = 0, f = 1 MHz f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH 60% IF = 5 mA, RL = 200 , VDD = 20 V (See note 2.) 2. Turn-ON and Turn-OFF Times IF 1 4 2 3 RL VDD VOUT IF VOUT 10% t ON 90% t OFF G3VM-61AR/DR MOS FET Relays Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Load voltage (AC peak/DC) Typical Maximum Unit --- --- 48 V IF 5 10 25 mA Continuous load current (AC peak/DC) IO --- --- 2 A Operating temperature Ta -20 --- 65 C DIP VDD Operating LED forward current Engineering Data Continuous load current vs. Ambient temperature LED forward current vs. LED forward voltage IO - Ta 40 30 20 IF - VF 3 LED forward current IF (mA) Continuous load current IO (A) LED forward current IF (mA) IF - Ta 50 G3VM-61AR/DR LED forward current vs. Ambient temperature 2 100 Ta = 25C 10 1 1 0.1 10 -20 0 20 40 60 80 0.01 0 -40 100 -20 0 Ambient temperature Ta (C) Continuous load current vs. On-state voltage 40 60 80 100 On-state resistance vs. Ambient temperature On-state resistance RON (m) Ta = 25C IF = 5mA 2 1 0 -1 IO = 2A IF = 5mA, t < 1s 100 50 0.1 0.2 -40 -20 0 On-state voltage VON (V) Turn ON, Turn OFF time vs. LED forward current 80 RL = 200 Ta = 25C 10 t off t on 10 1 -20 0 100 20 40 60 80 100 Ambient temperature Ta (C) Current leakage vs. Ambient temperature ILEAK - Ta 100 VDD = 20V RL = 200 IF = 5mA 10 t on 1 t off 0.1 100 VOFF = 60V 10 1 0.1 0.01 1 t < 1s 0 -40 100 Current leakage ILEAK (nA) VDD = 20V 0.01 60 IO = 1A tON, tOFF - Ta Turn ON, Turn OFF time tON, tOFF (ms) Turn ON, Turn OFF time tON, tOFF (ms) tON, tOFF - IF 0.1 40 2 2 Ambient temperature Ta (C) Turn ON, Turn OFF time vs. Ambient temperature 100 1 20 1.5 IFT - Ta 150 0 0 1 LED forward voltage VF (V) Trigger LED forward current vs. Ambient temperature -2 -0.1 0.5 RON - Ta 3 -3 -0.2 0 Ambient temperature Ta (C) IO - VON Continuous load current IO (A) 20 Trigger LED forward current IFT (mA) 0 -40 0.01 -40 -20 LED forward current IF (mA) 0 20 40 60 80 100 Ambient temperature Ta (C) -40 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Safety Precautions * Refer to "Common Precautions" for all G3VM models. 2 Appearance/Dimensions DIP4 Appearance DIP (Dual Inline Package) DIP4 Mold pin mark OMRON logo Model name Pin 1 mark 932 LOT No. Note: The actual product is marked differently from the image shown here. The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. Dimensions (Unit: mm) PCB Terminals Surface-mounting Terminals Weight: 0.25 g Weight: 0.25 g PCB Dimensions (Bottom View) Four, 0.8-dia. holes 2.54 (0.61) 2.54 4.580.25 4.580.25 6.40.25 (0.61) (1.52) (1.52) 6.40.25 Actual Mounting Pad Dimensions 7.620.25 7.620.25 0.80.25 (Recommended Value, Top View) 3.65 +0.15 -0.25 0.25 +0.1 -0.05 2.5 min. 1.20.15 0.50.1 2.540.25 3.65 +0.15 -0.25 2.54 4.0 +0.25 -0.2 1.0 min. 7.85 to 8.80 1.20.15 2.540.25 Note: The actual product is marked differently from the 1.0 min. 8.3 to 8.8 10.0 max. 1.3 1.5 image shown here. * Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. * Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. K139-E1-02 0412(0412)(O) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: G3VM-61AR G3VM-61DR G3VM-61DR(TR)