X5R Dielectric General Specifications GENERAL DESCRIPTION * General Purpose Dielectric for Ceramic Capacitors * EIA Class IIDielectric * Temperature variation of capacitance is within 15% from -55C to +85C * Well suited for decoupling and filtering applications * Available in High Capacitance values (up to 100F) PART NUMBER (see page 2 for complete part number explanation) 1210 4 D 107 M A T 2 A Size (L" xW") 0101** 0201 0402 0603 0805 1206 1210 1812 Voltage 4 =4V 6 =6.3V Z =10V Y= 16V 3 =25V D =35V 5 =50V 1 =100V Dielectric D =X5R Capacitance Code (In pF) 2 Sig. Digits + Number ofZeros Capacitance Tolerance K =10% M =20% Failure Rate A = N/A Terminations T = PlatedNi andSn Packaging 2=7"Reel 4 = 13"Reel U = 4mm TR (01005) Special Code A = Std. **EIA 01005 NOTE: Contact factory for availability of Tolerance Options for Specific PartNumbers. Contact factory for non-specified capacitancevalues. TYPICAL ELECTRICAL CHARACTERISTICS Insulation Resistance vs Temperature Temperature Coefficient 10,000 20 % Capacitance 10 1,000 5 0 -5 -10 -15 -20 -60 -40 -20 0 +20 +40 Temperature C 26 Insulation Resistance (OhmFarads) 15 +60 +80 100 0 0 20 40 60 80 100 120 Temperature C 100917 X5R Dielectric Specifications and Test Methods Parameter/Test Operating Temperature Range Capacitance Dissipation Factor Insulation Resistance Dielectric Strength Resistance to Flexure Stresses Appearance Capacitance Variation Dissipation Factor Insulation Resistance Solderability Resistance to Solder Heat Thermal Shock Load Life Load Humidity 100917 Appearance Capacitance Variation Dissipation Factor Insulation Resistance Dielectric Strength Appearance Capacitance Variation Dissipation Factor Insulation Resistance Dielectric Strength Appearance Capacitance Variation Dissipation Factor Insulation Resistance Dielectric Strength Appearance Capacitance Variation Dissipation Factor Insulation Resistance Dielectric Strength X5R Specification Limits -55C to +85C Within specified tolerance 2.5% for 50V DC rating 12.5% for 25V, 35V DC rating 12.5% Max. for 16V DC rating and lower Contact Factory for DF by PN 10,000M or 500M - F, whichever is less No breakdown or visual defects No defects 12% Measuring Conditions Temperature Cycle Chamber Freq.: 1.0 kHz 10% Voltage: 1.0Vrms .2V For Cap > 10 F, 0.5Vrms @ 120Hz Charge device with rated voltage for 120 5 secs @ room temp/humidity Charge device with 250% of rated voltage for 1-5 seconds, w/charge and discharge current limited to 50 mA(max) Deflection: 2mm Test Time: 30 seconds Meets Initial Values (As Above) Initial Value x 0.3 95% of each terminal should be covered with fresh solder No defects, <25% leaching of either end terminal Dip device in eutectic solder at 230 5C for 5.0 0.5 seconds 7.5% Meets Initial Values (As Above) Meets Initial Values (As Above) Dip device in eutectic solder at 260C for 60 seconds. Store at room temperature for 24 2 hours before measuring electrical properties. Meets Initial Values (As Above) No visual defects Step 1: -55C 2 30 3 minutes 7.5% Step 2: RoomTemp 3minutes Meets Initial Values (As Above) Step 3: +85C 2 30 3 minutes Meets Initial Values (As Above) Step 4: Room Temp 3 minutes Repeat for 5 cycles and measure after 24 2 hours at room temperature Meets Initial Values (As Above) No visualdefects 12.5% Initial Value x 2.0 (SeeAbove) Initial Value x 0.3 (SeeAbove) Meets Initial Values (As Above) No visualdefects 12.5% Initial Value x 2.0 (SeeAbove) Initial Value x 0.3 (SeeAbove) Meets Initial Values (As Above) Charge device with 1.5X rated voltagein test chamber set at 85C 2C for 1000 hours (+48,-0). Note: Contact factory for *optional specification part numbers that are testedat < 1.5X ratedvoltage. Remove from test chamber and stabilize at room temperature for 24 2hours Store in a test chamber set at 85C 2C/ 85% 5% relative humidity for 1000 hours (+48, -0) with rated voltageapplied. Remove from chamber and stabilizeat room temperature and humidity for 24 2 hours before measuring. 27 X5R Dielectric Capacitance Range PREFERRED SIZES ARE SHADED Case Size Soldering Packaging (L) Length (W) Width (t) Terminal Voltage: 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 Cap(F) 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 10 22 47 100 Voltage: Cap(pF) mm (in.) mm (in.) mm (in.) 101 151 221 331 471 681 102 152 222 332 472 682 103 153 223 333 473 683 104 154 224 334 474 684 105 155 225 335 475 106 226 476 107 Paper/Embossed 0.40 0.02 (0.016 0.0008) 0.20 0.02 (0.008 0.0008 0.10 0.04 (0.004 0.0016) 6.3 16 B B B B B B B B B B B B B B B B B B B B B B B B B Case Size Letter Max. Thickness 0101* Reflow Only A 0.33 (0.013) 0201 Reflow Only All Paper 4 0.60 0.09 (0.024 0.004) 0.30 0.09 (0.011 0.004) 0.15 0.05 (0.006 0.002) 6.3 10 16 A A A A A A A A A A A A 25 A A A A A A A A A A A A A A A A A A A A A A A A A A B A A B A A F F F F F F A C 4 6.3 6.3 16 0101* B 0.22 (0.009) 0402 Reflow/Wave All Paper 10 F 16 25 4 1.00 0.10 (0.040 0.004) 0.50 0.10 (0.020 0.004) 0.25 0.15 (0.010 0.006 6.3 10 16 25 C C C C C C C C C C C E 0.71 (0.028) PAPER 50 4 6.3 1.60 0.15 (0.063 0.006) 0.81 0.15 (0.032 0.006) 0.35 0.15 (0.014 0.006) 10 16 25 C C C C C C C E C C C C E C C C C C E E E E E E E E E 4 6.3 10 16 G 0.90 (0.035) J 0.94 (0.037) 50 G G G G G G G G G G J G G G G G G G G G G G G G G 50 G G G J G G G J J K K K G J J J K K J J J J K J J K K G J G 4 6.3 10 16 25 G G G G G 0402 F 0.40 (0.016) 35 C 25 0805 Reflow/Wave Paper/Embossed C C C C C C C C C 0201 C 0.56 (0.022) C C C C C 0603 Reflow/Wave All Paper G 35 50 4 N P P P P 4 6.3 N N P P P P 6.3 2.01 0.20 (0.079 0.008) 1.25 0.20 (0.049 0.008) 0.50 0.25 (0.020 0.010) 10 16 25 N N J P P P 10 0603 K 1.02 (0.040) M 1.27 (0.050) N P 1.40 1.52 (0.055) (0.060) EMBOSSED 35 N N N N N N N N N N N N 50 N N N N N N P P P P N P P N P P N P P P P P P 16 25 35 50 0805 Q 1.78 (0.070) X 2.29 (0.090) Y 2.54 (0.100) Z 2.79 (0.110) PAPER and EMBOSSED available for 01005 NOTE: Contact factory for non-specified capacitancevalues *EIA 01005 28 100917 X5R Dielectric Capacitance Range PREFERRED SIZES ARE SHADED 1206 Reflow/Wave Paper/Embossed Case Size Soldering Packaging (L) Length (W) Width (t) Terminal Voltage: 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 Cap(F) 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 10 22 47 100 Voltage Cap(pF) mm (in.) mm (in.) mm (in.) 101 151 221 331 471 681 102 152 222 332 472 682 103 153 223 333 473 683 104 154 224 334 474 684 105 155 225 335 475 106 226 476 107 4 X X X X X 4 6.3 Q X X X X X 6.3 3.20 0.20 (0.126 0.008) 1.60 0.20 (0.063 0.008) 0.50 0.25 (0.020 0.010) 10 16 25 35 Q Q X X X X X 10 Case Size Letter Max. Thickness A 0.33 (0.013) 1210 Reflow Only Paper/Embossed 50 100 4 6.3 35 50 X X Q Q Q Q Q Q X X X Q Q Q Q Q X Z Z X X X X X X X X X X X X Z Z Z Z Z Z Z Z Z 16 25 35 50 100 25 35 50 Z Z Z 4 X Z Z Z 6.3 1206 B 0.22 (0.009) 3.20 0.20 (0.126 0.008) 2.50 0.20 (0.098 0.008) 0.50 0.25 (0.020 0.010) 10 16 25 1812 Reflow Only All Embossed C 0.56 (0.022) Q X Z Z Z 10 Q Z Z Z Z 16 4 6.3 4.50 0.30 (0.177 0.012 3.20 0.20 (0.126 0.008 0.61 0.36 (0.024 0.014) 10 16 25 Z Z Z 4 6.3 10 1210 E 0.71 (0.028) PAPER F 0.40 (0.016) G 0.90 (0.035) J 0.94 (0.037) Z 16 35 50 35 50 Z 25 1812 K 1.02 (0.040) M 1.27 (0.050) N P 1.40 1.52 (0.055) (0.060) EMBOSSED Q 1.78 (0.070) X 2.29 (0.090) Y 2.54 (0.100) Z 2.79 (0.110) NOTE: Contact factory for non-specified capacitancevalues *EIA 01005 100917 29