TECHNICAL CHARACTERISTICS 1,0 SPECIFICATION >Rating: 20mA, 15VDC >Contact Resistance: Initial: 100mOHM max. After Life Test: 2OHM max. >Insulation Resistance: min. 100MOHM at 500VDC >Dielectric Strength: 250VAC for 1 minute >Stroke: 0.25 +0.05 / - 0.1mm GND 1 5,5 4,6 4 3,1 4,3 2 3 GND MATERIAL >Cover: Copper alloy >Frame: LCP UL 94V-0, color Black >Contact: Stainless Steel with silver cladding >Terminal: Copper alloy with silver plating >Tape: Polyimide tape 3,8 5,4 P.C.B. MOUNTING PLAN SOLDERING INFORMATION >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air >Hand soldering under 350C for 3 sec. max 0,4 Grounded Terminal can be effective even if not soldered 0,8 ENVIRONMENTAL >Storage condition: -40C ~ +85C >Operation condition: -40C ~ +85C >Compliance: Lead Free, ROHS, Reach GND 0,45 0,05 0,07 GND 0,5 0,5 2,5 5,1 0,3 3,7 4 2 PACKAGING INFORMATION >Tape & Reel 5,0 0,15 O 3,20 GND 3 W 1 PN 431 183 008 816 431 153 008 826 4 5,0 0,15 2 GND Force 160g 50gf 260g 50gf Color of Stem No actuator No actuator Life cycle 1.000.000 200.000 3 1 W SCHEMATIC GND Scale - 5:1 GENERAL TOLERANCE .x = +/- 0,1 Projection This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. Basic material Date Drawn 10-07-13 Name Jelisarow Checked c warning text 11-10-28 WJ b Stroke Tolerance was +/- 0,15 11-08-30 WJ WE eiCan a General Tolerance was +/- 0,2 11-08-26 WJ CAD REV FILE DATE BY EDV NO DESCRIPTION SwTact WS-TSS 5x5mm Tact Switch with ground terminal, J-Bend SMD version Wurth Elektronik eiCan 4311x30088x6.dft Scale Drawing.- No. 5:1 4311x30088x6 Position SIZE A4 System :Solid Edge V20