Output current availability 0.35A-1.5A. Consult Factory for customized programming Operates with Industry Standard Dimmers Compact Encapsulated Assembly Active Power Factor Correction Output Over-Voltage, Over-Current and Short-Circuit Protection and Auto Recovery High Temperature Operation (up to 90C case) UL Approved, ENEC Approved, CE Mark Long Life ROHS Compliant ELM030 ELM040 ELM050 12-34 W 34-40 W 41-53 W Constant-Current LED Drivers with Dual Dimming: Forward/Reverse-Phase and 0 - 10 V Input& Voltage Max.&Output& Power Output& Voltage Output& Current 120$&$277$ Vac$nominal 50$W 10$to$56$ Vdc 350$mA$to$ 1.75$A$CC TROPO is designed for powering LED luminaries with standard lighting contro Standard Light Switches Triac based Incandescent Dimmers (Standard phase - leading edge ElectronicPower& Low Voltage Dimmers Dimming& (Reverse Phase - trailing edge) Max.&Case& Dimming& Efficiency &THD Temperature Factor Method Range requiring dimmable Class 2 outputs such as 90C$TROPO is ideal for installations ForwardKPhase, $84%$ 10$K$100% <$20% >$0.9 (measured$at$ ReverseKPhase typical (%$of$$Iout) Commercial Lighting Residential Lig the$hot$spot) &$0$K$10V CC: Constant Current The following diagram depicts a typical installation utilizing the TROPO: PRODUCT DESCRIPTION The ELM030/040/050 series of LED drivers is compliant with industry standard phase-cut dimmers, both forward- phase and reverse-phase, and 0-10V dimmers, making it ideally suited for both new construcUons and retrofit applicaUons, in ResidenUal or Commercial markets. + Dim TRIAC Dimmer - Dim Triac Based Dimmer Dimmer + LEDs 0-10 V Dimmer ELM030 TROPO FEATURES * NOT RECOMMENDED FOR NEW DESIGNS. For new designs, use the ESM series * CompaUble with TRIAC (forward-phase or leading-edge) / ELV (reverse-phase or trailing-edge) and 0-10 V dimmers * 120 and 277 Vac nominal input voltage * ProtecUons: output open load, over-current and short- circuit (hiccup), and over-temperature with auto recovery * Conducted and radiated EMI: FCC CFR Title 47 Part 15 compliant with Class B at 120 Vac and Class A at 277 Vac * Enables ENERGY STAR(R) and DLC (DesignLight ConsorUum(R)) luminaire compliance * CFL ballast rectangular metal case * IP20-rated case with silicone-based poang * 90C maximum case hot spot temperature * 50,000 hours lifeUme * Class 2 power supply * Double-insulated power supply between input and output (class II) * Worldwide safety approvals - LEDs TYPICAL APPLICATION DIAGRAM METAL CASE: ELM030: 110 x 60 x 26 mm (4.33 x 2.36 x 1.02 in) ELM040/050: 127 x 70 x 28 mm (5 x 2.76 x 1.1 in) APPLICATIONS * Troffers * Downlights * Low Bay lighUng * Commercial lighUng * Architectural lighUng (c) ERP - ENERGY RECOVERY PRODUCTS Purple: + Dim Signal White: Neutral 5 1 Black: Line LED DRIVER Grey: - Dim Signal Red: + LEDs Black: - LEDs WIRING DIAGRAM ELM030/040/050 Data Sheet December 7, 2014 - Rev. F Di 10 Ou du Ou to M m di Fa St ELM030 ELM040 ELM050 12-34 W 34-40 W 41-53 W Constant-Current LED Drivers with Dual Dimming: Forward/Reverse-Phase and 0 - 10 V 1 - INPUT SPECIFICATION (@25C ambient temperature) Units Minimum 90 Vac 240 Hz 57 Input4Voltage4Range4(Vin) Input4Frequency4Range Power4Factor4(PF) 0.9 Typical 120 277 60 Maximum 132 305 63 Notes At1nominal1input1voltage1and1nominal1LED1load1 (nominal1Vout) >10.9 0.441A1@11201Vac 0.191A1@12771Vac 0.661A1@11201Vac A D D 0.291A1@12771Vac A 101A1peak At1any1point1on1the1sine1wave1and125C A 2501A1@112011Vac Measured1per1IEC60950D1 Complies1with1IEC61000D3D21for1Class1C1equipment !At11nominal1input1voltage1and1nominal1LED1load !Complies1with1DLC1(DesignLight1Consortium)1 20% 111technical1requirements1v2.0 Measured with nominal input voltage, a full sinusoidal wave form without dimmer connected. Models with D 84% D full1load1ratings1of120W1have1an1efficiency1of175%. Input4Current4(ELM030) A Input4Current4(ELM040/050) Inrush4Current Leakage4Current Input4Harmonics Total4Harmonics4Distortion4 (THD) Efficiency Isolation D D Meets1UL60950D11for1class1II1reinforced/double1insulation1power1supply 2 - OUTPUT SPECIFICATION (@25C ambient temperature) Output4Voltage4(Vout) Output4Current4(Iout) Output4Current4Regulation Units Minimum Vdc 10 mA 350 % :5 Maximum Notes 56 See*ordering*information*for*details 1750 See*ordering*information*for*details 2.5 5 Includes*AC*line*voltage,*load,*and*current*set*point*variations The driver does not operate outside of the regulation requirements for more than 500 ms during power on with nominal LED load and without* : : 10 dimmer. % The driver does not operate outside of the regulation requirements for more than 500 ms during power on with nominal LED load and with* : : 15 dimmer. !Measured with a nominal LED load and nominal input voltage with no <*25%*peak:to:peak*of*rated*output* dimming. current*for*each*model !Calculated*in*accordance*with*the*IES*Lighting*Handbook,*9th*edition 10% 100% The*dimming*range*will*be*dependent*on*each*specific*dimmer. The output is within the regulation band within 1 second of AC voltage s 1 being*applied.*This*is*measured*with*no*incandescent*dimmer*attached,* at*nominal*input*voltage*and*at*nominal*load. Output4Current4Overshoot Ripple4Current Dimming4Range4(%4of4Iout) StartAup4Time Typical Output4Controls +Dim4Signal,4ADim4Signal The +Dim/:Dim signal pins can be used to adjust the output setting via a standard commercial wall dimmer, an external control voltage source (0 to 10 Vdc), or a variable resistor when using the recommended number of LEDs.*The*dimming*input*permits*10%*to*100%*dimming.*The*voltage*on*the*+Dim*input*must*be**10V. SaveEnergy@ERPpowerllc.com 2 www.ERPpowerllc.com ELM030 ELM040 ELM050 12-34 W 34-40 W 41-53 W Constant-Current LED Drivers with Dual Dimming: Forward/Reverse-Phase and 0 - 10 V 3 - PROTECTION FEATURES Output Open Load, Over-Current and Short-Circuit ProtecUon (hiccup), and Over-Temperature ProtecUon with Auto Recovery 4 - ENVIRONMENTAL CONDITIONS Units Minimum Operating6Case6Temperature6(Tc) C #30 Storage6Temperature Humidity Cooling C % #40 5 Acoustic6Noise Typical +90 # Convection+cooled dBA Mechanical6Shock6Protection Vibration6Protection MTBF Lifetime Maximum +85 95 24 Notes Case+temperature+measured+at+the+hot+spot+!tc+ on+label.+See+labeling+in+page+9. Non#condensing Measured+at+a+distance+of+1+meter,+without+and+ with+approved+dimmers. per+EN60068#2#27 per+EN60068#2#6+&+EN60068#2#64 >+250,000+hours+when+operated+at+nominal+input+and+output+conditions,+and+at+Tc++70C 50,000+hours+at+70C+maximum+case+hot+spot+temperature+(see+hot+spot+!tc+on+label+in+page+9) 5 - EMC COMPLIANCE AND SAFETY APPROVALS Conducted)and)Radiated)EMI Harmonic)Current)Emissions Voltage)Fluctuations)&)Flicker ESD)(Electrostatic) Discharge) RF)Electromagnetic)Field) Susceptibility Electrical)Fast)Transient Immunity) Compliance Surge IEC61000'4'2 6-kV-contact-discharge,-8-kV-air-discharge,-level-3 IEC61000'4'3 3V/m,-80-'-1000-MHz,-80%-modulated-at-distance-of-3-meters IEC61000'4'4 -2-kV-on-AC-power-port-for-1-minute,-1-kV-on-signal/control-lines -1-kV-line-to-line-(differential-mode)-/-2-kV-line-to-common-mode-ground(tested-to-secondary-ground)-on-AC-power-port,-0.5-kV-for-outdoor-cables IEC61000'4'5 Conducted)RF) Disturbances Voltage)Dips Transient)Protection Ring)Wave UL cUL CE EMC)Compliance FCC-CFR-Title-47-Part-15-Class-B-at-120-Vac-and-Class-A-at-277-Vac IEC61000'3'2 For-Class-C-equipment IEC61000'3'3 IEC61000'4'6 3-V,-0.15'80-MHz,-80%-modulated IEC61000'4'11 >95%-dip,-0.5-period;-30%-dip,-25-periods;-95%-reduction,-250-periods ANSI/IEEE-c62.41.1'2002-&-c62.41.2'2002-category-A,-2.5-kV-ring-wave Safety)Agency)Approvals UL8750-recognized -UL60950'1-recognized CSA-C22.2-60950'1 IEC61347'2'13-electronic-control-gear-for-LED-Modules ENEC-mark-and-CE-mark-for-EU Safety Units Minimum Typical Maximum Hi4Pot4(High4Potential) SaveEnergy@ERPpowerllc.com Vdc 4242 3 Notes !Insulation/between/the/input/(AC/line/and/Neutral)/ and/the/output !Tested/at/the/RMS/voltage/equivalent/of/3000/Vac www.ERPpowerllc.com ELM030 ELM040 ELM050 12-34 W 34-40 W 41-53 W Constant-Current LED Drivers with Dual Dimming: Forward/Reverse-Phase and 0 - 10 V 6 - PHASE-CUT DIMMING Dimming of the driver is possible with standard TRIAC based incandescent dimmers that chop the AC voltage (as shown in Figure 1), or with ELV dimmers. During the rapid rise Ume of the AC voltage when the dimmer turns on, the driver does not generate any voltage or current oscillaUons, and inrush current is controlled. During the on-Ume of the AC input, the driver regulates the output. The RMS value of the driver output current is proporUonal to the on-Ume of the AC input voltage. When operaUng with an incandescent dimmer, the RMS output current varies depending upon the conducUon angle and RMS value of the applied AC input voltage. The ELM030/040/050 series offers dual dimming compaUbility with both TRIAC/ELV and 0-10V dimmers. TRIAC/ELV dimming always has priority over 0-10 V dimming. Figure 1 7 - COMPATIBLE PHASE-CUT DIMMERS 120 Vac Nominal Line * Cooper, Aspire Series (part numbers 9530XXX) * Leviton, IllumaTech Series (part numbers IPI06-XXX) * Leviton, Trimatron Series (part numbers 6602-X, 6681-X, 6683-X, 6684-X, 700-X and 705-X) * Leviton, SureSlide Series (part number 6631) * Leviton, True Touch Series part number 6606-1LM) * Lutron Skylark Series (part numbers S-600, S2-LH) * Lutron, Maestro Series (part number MAW-600) * Lutron, Diva series (part number DVCL-153) In addiUon, the driver series is compaUble with Electronic Low Voltage (ELV) dimmers that employ reverse-phase (also known as trailing-edge) control such as: * Lutron Nova T Series (part number NTELV-600) * Lutron Faedra (part number FAELV-500-XX) * Leviton AcenU (part number ACE06-XXX) * Leviton Vizia (part number VZE04) 277 Vac Nominal Line * Leviton, IllumaTech Series (part number IPX06-70X) SaveEnergy@ERPpowerllc.com 4 www.ERPpowerllc.com ELM030 ELM040 ELM050 12-34 W 34-40 W 41-53 W Constant-Current LED Drivers with Dual Dimming: Forward/Reverse-Phase and 0 - 10 V 0 Percent of Output Current (Normalized to Rated Current) ELM030 Series 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 2000 4000 6000 8000 10000 12000 The maximum current supplied by the +Dim signal pin is 2.5 mA. The tolerance of the output current while being dimmed is +/-5% typical unUl down to 2V. Figure 4 shows the relaUonship of the output current to the dimming input voltage. 9 - COMPATIBLE 0-10 V DIMMERS 0 2000 4000 6000 8000 10000 12000 Resistance () Figure 3 Normalized Output Current vs Dimming Voltage 110% 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 0 * Lutron, Nova Series (part number NFTV) SaveEnergy@ERPpowerllc.com ELM040/50 Series 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% Resistance () Figure 2 Percent of Output Current (Normalized to Rated Current Percent of Output Current (Normalized to Rated Current) 8 - 0-10 V DIMMING The ELM drivers operate only with 0-10V dimmers that sink current. They are not designed to operate with 0-10V control systems that source current, as used in theatrical/entertainment systems. Developed in the 1980's, the 0-10V sinking current control method is adopted by the InternaUonal Electrotechnical Commission (IEC) as apart of their IEC Standard 60929 Annex E. This method to dim the driver's output current is done via the +Dim/-Dim signal pins. These signal pins respond to a 1 to 10 V signal, delivering 10% to 100% of the output current based on rated current for each model. A pull-up resistor is included internal to the driver. When the +Dim input is short circuited to the -Dim wire or to the -LED wire, the output current is programmed to 5% of rated current. If the +Dim input is open circuited, the output current is programmed to 100% of rated current. When not used, the -Dim wire (grey) and to the +Dim wire (purple) can be capped or cut off. In this configuraUon, no dimming is possible and the driver delivers 100% of its rated output current. The voltage on the +Dim input must be 10V. A fixed or variable resistor can be also used from the dimming input to the return to adjust the output current. Figure 2 and 3 show the relaUonship of the output current to a resistor connected across the 0-10V dimming input, for the ELM030 and the ELM040/050 series. 5 1 2 3 4 5 6 7 Dimming Voltage (V) Figure 4 8 9 10 www.ERPpowerllc.com ELM030 ELM040 ELM050 12-34 W 34-40 W 41-53 W Constant-Current LED Drivers with Dual Dimming: Forward/Reverse-Phase and 0 - 10 V 10 - MECHANICAL DETAILS Metal case Flying leads, 18 AWG on power leads, 22 AWG on control leads, 203 mm (8 in) long, 105C rated, stranded, stripped by approximately 9.5mm, and Unned. All the wires, on both input and output, have a 300 V insulaUon raUng. Ingress ProtecVon: IP20 rated Packaging: I/O ConnecVons: 11 - OUTLINE DRAWINGS: ELM030 SERIES Dimensions: 110 x 60 x 26 mm (4.33 x 2.36 x 1.02 in) Volume: 310 g (10.47 in3) Weight: 171.6 g (10.93 oz) Figure 5 SaveEnergy@ERPpowerllc.com 6 www.ERPpowerllc.com ELM030 ELM040 ELM050 12-34 W 34-40 W 41-53 W Constant-Current LED Drivers with Dual Dimming: Forward/Reverse-Phase and 0 - 10 V 12 - OUTLINE DRAWINGS: ELM040/050 SERIES Dimensions: 127 x 70 x 28 mm (5 x 2.76 x 1.1 in) Volume: 248.9 cm3 (15.19 in3) Weight: 470 g (16.6 oz) Figure 6 SaveEnergy@ERPpowerllc.com 7 www.ERPpowerllc.com ELM030 ELM040 ELM050 12-34 W 34-40 W 41-53 W Constant-Current LED Drivers with Dual Dimming: Forward/Reverse-Phase and 0 - 10 V 13 - ORDERING INFORMATION - MODEL DESCRIPTION ELMW-- Series * 030 (12-34 W) * 040 (33-40 W) * 050 (41-53 W) Nominal Vin * 120 & 277 Vac Iout ERP Part Number Nominal Input Voltage Range (Vac) ELM030W-0300-42 ELM030W-0350-42 ELM030W-0350-56 ELM030W-0440-34 ELM030W-0500-42 ELM030W-0550-41 ELM030W-0700-24 ELM030W-0700-36 ELM030W-0700-42 ELM030W-0740-41 ELM030W-0800-42 ELM030W-0840-36 ELM030W-0900-26 ELM030W-0900-38 ELM030W-1000-24 ELM030W-1750-17.5 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 ELM040W-0700-48 ELM040W-0700-56 ELM040W-0900-42 ELM040W-1000-38 ELM040W-1200-31 ELM040W-1400-25 ELM040W-1750-20 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 ELM050W-0750-56 ELM050W-1000-48 ELM050W-1050-42 ELM050W-1120-42 ELM050W-1200-36 ELM050W-1200-42 ELM050W-1400-32 ELM050W-1400-38 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 120 & 277 Vout Max. Iout (mA) Max Vout Output Min Power (W) (Vdc) ELM030: 12 to 34 W 300 12.6 350 14.7 350 19.6 440 15.0 500 21 550 22.6 700 16.8 700 25.2 700 29.4 740 30.3 800 33.6 840 30.2 900 23.4 900 34.2 1000 24.0 1750 30.6 ELM040: 33 to 40 W 700 33.6 700 39.2 900 37.8 1000 38 1200 37.2 1400 35 1750 35 ELM050: 41 to 53 W 750 42 1000 48.0 1050 44.1 1120 47.0 1200 43.2 1200 50.4 1400 44.8 1400 53.2 Vout Nom (Vdc) Vout Max (Vdc) No Load Voltage (Vdc) 24 24 28 22 24 24 14 22 24 24 24 22 13 24 14 12 37.8 37.8 50.4 30 37.8 37.8 21.6 32.4 37.8 37 37.8 30.6 23.4 37.8 21.6 15.5 42 42 56 34 42 41 24 36 42 41 42 36 26 38 24 17.5 50 50 60 44.2 50 50 31.2 46.8 50 50 50 46.8 33.8 49.4 31.2 22.8 24 28 24 24 20 12.5 10 43.2 50.4 37.8 34.2 27.9 22.5 18 48 56 42 38 31 25 20 60 60 50 49.4 40.3 32.5 25 28 24 24 24 22 24 21 24 50.4 43.2 37.8 37.8 32.4 37.8 28.8 34.2 56 48 42 42 36 42 32 38 60 60 50 50 46.8 50 41.6 49.4 For addi(onal op(ons of output current and output voltage, contact your sales representa(ve or send an email to: SaveEnergy@ERPPowerLLC.com SaveEnergy@ERPpowerllc.com 8 www.ERPpowerllc.com ELM030 ELM040 ELM050 12-34 W 34-40 W 41-53 W Constant-Current LED Drivers with Dual Dimming: Forward/Reverse-Phase and 0 - 10 V 14 - LABELING There are two labels on the case of each model in the ELM030/040/050 series: one on the top face and one on the bopom face (face from where the wires exit). The ELM030W-0500-42 is used as an example to illustrate the typical labels. Bo]om Face Top Face Figure 7 USA Headquarters Tel: +1-805-517-1300 Fax: +1-805-517-1411 301 Science Drive, Suite 210 Moorpark, CA 93021, USA CHINA OperaVons Tel: +86-756-6266298 Fax: +86-756-6266299 No. 8 Pingdong Road 2 Zhuhai, Guangdong, China 519060 ERP - Energy Recovery Products (ERP Power, LLC) - reserves the right to make changes without further noUce to any products herein. ERP makes no warranty, representaUon or guarantee regarding the suitability of its products for any parUcular purpose, nor does ERP assume any liability arising out of the applicaUon or use of any product or circuit, and specifically disclaims any and all liability, including without limitaUon special, consequenUal or incidental damages. "Typical" parameters which may be provided in ERP data sheets and/or specificaUons can and do vary in different applicaUons and actual performance may vary over Ume. All operaUng parameters, including "Typicals" must be validated for each customer applicaUon by customer's technical experts. ERP does not convey any license under its patent rights nor the rights of others. ERP products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applicaUons intended to support or sustain life, or for any other applicaUon in which the failure of the ERP product could create a situaUon where personal injury or death may occur. Should Buyer purchase or use ERP products for any such unintended or unauthorized applicaUon, Buyer shall indemnify and hold ERP and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable aporney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ERP was negligent regarding the design or manufacture of the part. ERP is an Equal Opportunity/ AffirmaUve AcUon Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. SaveEnergy@ERPpowerllc.com 9 www.ERPpowerllc.com