1/6June 2008 / 613
www.sensortechnics.com
CPC / CPCL Series C-grade
Precision compensated pressure sensors / mV-output
FEATURES
· 0...4 "H2O to 0...150 psi
gage or differential,
0...15 to 0...150 psi absolute
· Precision temperature compensated
· Calibrated offset and span
· Voltage excitation
· Excellent long term stability
ELECTRICAL CONNECTIONEQUIVALENT CIRCUIT
SERVICE
Non-corrosive, non-ionic working fluids such as
clean dry air, dry gases and the like.
The media wetted materials are:
port 1: - front side of silicon sensor chip
- glass filled nylon
- RTV
- silgel (for devices of 5 psi and above)
- ceramic (Al2O3)
port 2: - silicon sensor chip
- glass filled nylon
- RTV
- ceramic (Al2O3)
+Vs
3
+Vou
t
2
-Vout
4
1
-Vs
Pin 1: -Vs
Pin 2: +Vout
Pin 3: +Vs
Pin 4: -Vout
2/6 June 2008 / 613
www.sensortechnics.com
CPC / CPCL Series C-grade
Precision compensated pressure sensors / mV-output
Maximum ratings (for all devices) Environmental specifications (for all devices)
Supply voltage VS3 to 16 V Temperature range
Compensated 0 to 70 °C
Lead temperature (soldering 5 seconds) 315 °C Operating -25 to 85 °C
Storage -40 to 125 °C
Common mode pressure 50 psig Humidity limits (non-condensing) 0 to 95 %RH
.ontraP gnitarepO erusserp foorP erusserp
1
tsruB erusserp
2
napselacslluF
3
.niM.pyT.xaM
...40LCPC H"4
2
Oisp3isp5Vm32Vm52Vm72
...01LCPC H"01
2
Oisp3isp5Vm91Vm02Vm12
...3.0CPCisp3.0isp3isp5Vm91Vm02Vm12
...10CPCisp1isp3isp5Vm71Vm81Vm91
...50CPCisp5isp51isp52Vm75Vm06Vm36
...51CPCisp51isp54isp57Vm58Vm09Vm59
...03CPCisp03isp09isp051Vm58Vm09Vm59
...06CPCisp06isp081isp003Vm58Vm09Vm59
...001CPCisp001isp052isp004Vm59Vm001Vm501
...051CPCisp051isp052isp004Vm58Vm09Vm59
PRESSURE SENSOR CHARACTERISTICS
VS = 12 V , TA = 25°C, pressure applied to port P1
SPECIFICATIONS
3/6June 2008 / 613
www.sensortechnics.com
CPC / CPCL Series C-grade
Precision compensated pressure sensors / mV-output
PERFORMANCE CHARACTERISTICS
VS = 12 V, TA = 25°C, pressure applied to port P1
Notes
1Proof pressure is the maximum pressure which may be applied without causing durable shifts of the electrical parameters of the sensing element.
2Burst pressure is the maximum pressure which may be applied without causing damage to the sensing element or leaks from the housing.
3Full scale span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure.
The span is ratiometric to the supply voltage.
4Non-linearity refers to the Best Straight Line fit measured for offset pressure, full-scale pressure and ½ full-scale pressure.
5Shift is relative to 25°C. The CPCL04... has a compensated temperature range from 0 to 50°C.
6This is the common-mode voltage of the output arms (pins 2 and 4) for VS = 12 V.
scitsiretcarahC.niM.pyT.xaMtinU
tesffoerusserporeZ0.1-00.1+Vm
siseretsyhdnaytiraenil-nondenibmoC
4
52.0±0.1± SSF%
)C°07ot0(stceffeerutarepmeT
5
napS0.2±
tesffO0.1±Vm
ecnatsisertupnI5
kΩ
ecnatsisertuptuO 3
)SSF%09ot01(emitesnopseR...LCPC005 sµ
...CPC001
egatlovedomnommoC
6
6V
4/6 June 2008 / 613
www.sensortechnics.com
CPC / CPCL Series C-grade
Precision compensated pressure sensors / mV-output
Package version G and A
(no port)
Package version GF and AF
OUTLINE DRAWING
Vent hole (P2)
(G version only)
P1
6.1
(0.24)
1.1
(0.04)
5.8
(0.23)
2.5
(0.10)
0.5
(0.02) 0.3
(0.01)
15.5
(0.61)
9.9
(0.39)
4.1
(0.16)
0.6
(0.03)
2.8
(0.11)
7.4
(0.29)
7.6
(0.30)
8.9
(0.35)
9.9
(0.39)
1 2 3 4
DIA 0.8
(0.03)
P1
Ven t hole (P2)
(GF version only)
6.1
(0.24)
2.5
(0.10)
1.1
(0.04)
0.3
(0.01)
0.5
(0.02)
15.5
(0.61)
9.9
(0.39)
4.1
(0.16)
2.8
(0.11)
0.6
(0.03)
9.9
(0.39)
7.6
(0.30)
5.8
(0.23) 7.4
(0.29)
8.9
(0.35)
10.4
(0.41)
DIA 3.8
(0.15)
1 2 3 4
DIA 4.8
(0.19)
DIA 2.0
(0.08)
mass: approx. 2 g dimensions in mm (inches)
mass: approx. 2 g dimensions in mm (inches)
5/6June 2008 / 613
www.sensortechnics.com
CPC / CPCL Series C-grade
Precision compensated pressure sensors / mV-output
Package version D
Package version DF
OUTLINE DRAWING
mass: approx. 2 g dimensions in mm (inches)
mass: approx. 2 g dimensions in mm (inches)
0.3
(0.01)
6.1
(0.24)
2.5
(0.10)
2.5
(0.10)
0.5
(0.02)
1.1
(0.04)
7.4
(0.29)
5.8
(0.23)
0.5
(0.02)
2.5
(0.10)
15.5
(0.61)
9.9
(0.39)
4.1
(0.16)
7.6
(0.30)
8.9
(0.35)
9.9
(0.39)
Ven t h o le (P2)
P1
DIA 0.8
(0.03)
1 2 3 4
4.1
(0.16)
P1
Vent (P2)
DIA 3.8
(0.15)
10,4
(0.41)
8.9
(0.35)
7.4
(0.29)
5.8
(0.23)
7.6
(0.30)
9.9
(0.39)
0.6
(0.03)
2.8
(0.11)
9.9
(0.39)
15.5
(0.61)
0.5
(0.02) 0.3
(0.01)
1.1
(0.04)
2.5
(0.10)
6.1
(0.24)
19.8
(0.78)
1 2 3 4
DIA 4.8
(0.19)
DIA 2.0
(0.08)
6/6 June 2008 / 613
www.sensortechnics.com
CPC / CPCL Series C-grade
Precision compensated pressure sensors / mV-output
Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the
application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
erusserP egnar
secivedetulosbAsecivedegaGsecivedlaitnereffiD
tropoN )A( troplaixA )FA( tropoN )G( troplaixA )FG( tropoN )D( troplaixA )FD(
H"4
2
OCG40LCPCCFG40LCPCCD40LCPCCFD40LCPC
H"01
2
O---
7
CFG01LCPC---
7
CFD01LCPC
isp3.0CG3.0CPCCFG3.0CPC---
7
---
7
isp1---
7
CFG10CPC---
7
CFD10CPC
isp5CG50CPCCFG50CPC---
7
CFD50CPC
isp51CA51CPCCFA51CPC---
7
CFG51CPC---
7
CFD51CPC
isp03CA03CPCCFA03CPC---
7
---
7
---
7
---
7
isp06---
7
CFA06CPC---
7
---
7
---
7
CFD06CPC
isp001---
7
CFA001CPCCG001CPCCFG001CPC---
7
---
7
isp051---
7
---
7
---
7
CFG051CPC---
7
CFD051CPC
ORDERING INFORMATION
Note
7THESE DEVICES ARE AVAILABLE ON SPECIAL REQUEST.
MINIMUM ORDER QUANTITY APPLIES.
