72
G3VM-351G
MOS FET Relays
Slim, 2.1 -mm High Rela y Incorporating a
MOS FET Optically Coupled with an
Infrared LED in a Miniature, Flat SOP
Package
• Upgraded G3VM-S2 Series.
• Continuous load current of 110 mA.
• Dielectric strength of 1,500 Vrms between I/O.
■Application Examples
• Broadband systems
• Measurement devices
• Data loggers
• Amusement machines
Note: The actual product is marked differently from the image
shown here.
■List of Models
■Dimensions
Note: All units are in millimeters unless otherwise indicated.
■Terminal Arrangement/Internal Connections (Top View)
■Actual Mounting Pad Dimensions (Recommended Value, Top View)
Contact form Terminals Load voltag e (peak value) Model Number per stick Number per tape
SPST-NO Surface-mounting
terminals 350 VAC G3VM-351G 100 ---
G3VM-351G(TR) --- 2,500
4.4±
0.25
3.9±
0.2
0.4±
0.1
2.54±
0.25
2.1 max.
0.1±
0.1
7.0±
0.4
0.6±
0.3
0.15
G3VM-351G
Note: The actual product is marked different ly
from the image shown here. Weight: 0.1 g
43
12
G3VM-351G
6 to 6.3
1.2
0.8
2.54
G3VM-351G
73
G3VM-351GG3VM-351G
■Absolute Maximum Ratings (Ta = 25°C)
■Electrical Characteristics (Ta = 25°C)
■Recommended Operating Conditions
Use the G3VM under the f ollowing conditions so that the Relay will operate properly.
■Engineering Data
Load Current vs. Ambient Temperature
G3VM-351G
■Safety Precautions
Refe r to page 6 for prec autions com mon to all G3VM models.
Item Symbol Rating Unit Measurement Conditions
Input LED forward current IF50 mA
Repetitive peak LED forward
current IFP 1 A 100 ms pulses, 100 pps
LED forward current reduction
rate D IF/°C-0.5 mA/°CTa ³ 25°C
LED reverse voltage VR5V
Connection temperature Tj125 °C
Output Output dielectric strength VOFF 350 V
Continuous load current IO110 mA
ON current reduction rate D ION/°C-1.1 mA/°CTa ³ 25°C
Connection temperature Tj125 °C
Dielectric strength between input and
output (See note 1.) VI-O 1,500 Vrms AC for 1 min
Operating temperature Ta-40 to +85 °C With n o ic ing o r conden sation
Storage temperature Tstg -55 to +125 °C With n o ic ing o r conden sation
Soldering temperature (10 s) --- 260 °C 10 s
Note: 1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
Item Symbol Mini-
mum Typical Maxi-
mum Unit Measurement
conditions
Input LED forward voltage VF1.0 1.15 1.3 V IF = 10 mA
Reverse current IR--- --- 10 mAV
R = 5 V
Capacity between terminals CT--- 30 --- pF V = 0, f = 1 MHz
Trigger LED forward current IFT --- 1 3 mA IO = 100 mA
Output Maximum resi stance with output ON RON --- 25 35 WIF = 5 mA,
IO = 110 mA, t < 1 s
--- 35 50 WIF = 5 mA,
IO = 110 mA
Current leakage when the relay is
open ILEAK --- --- 1.0 mAV
OFF = 350 V
Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V
Insulation resistance RI-O 1,000 --- --- MWVI-O = 500 VDC,
RoH £ 60%
Turn-ON time tON --- 0.3 1.0 ms IF = 5 mA, RL = 200 W,
VDD = 20 V (See note 2.)
Turn-OFF time tOFF --- 0.1 1.0 ms
VOUT
IF
tON tOFF
10% 90%
IF1
2
4
3
RLVDD
VOUT
Note: 2. Turn-ON and Turn-OFF
Times
Item Symbol Minimum Typical Maximum Unit
Output dielectric strength VDD --- --- 280 V
Operating LED forward current IF57.525mA
Continuous load curren t IO--- --- 100 mA
Operating temperature Ta- 20 --- 65 °C
Ambient temperature (°C)
Load current (mA)
80
100
120
140
60
40
20
0
−20 0 20 40 60 80 100
