Notice for TAIYO YUDEN products 1 Please read this notice before using the TAIYO YUDEN products. Product information in this catalog is as of October 2008. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. INFORMATION ON THE GENERAL CATALOG REMINDERS Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ). It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel. Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. Should you have any question or inquiry on this matter, please contact our sales staff. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 3 NTC MULTILAYER CHIP NTC THERMISTORS OPERATING TEMP. 55125 1005TYPE Except for 1005TYPE FEATURES 125 B EIAJ Guaranteed up to 125. Large B constant for higher temperature sensing capability. Ideal for automatic mounting in bulk or from tapes because of front-rear symmetry. Available in a standard EIA compatible case size. Improved reliability due to use of internal electrodes. APPLICATIONS Telecommunications equipmentmobile telephones,cellular telephones, cordless telephones, etc. Office automationprinters, facsimiles, word processors, etc. Consumer electronics VCRs, color television sets, LCD television sets, CD players, etc. Battery protection circuit OA CD ORDERING CODE 9 1 3 5 7 mm BK TB S0 S1 NTC 102 154 1.0x0.50402 1.6x0.80603 2 P 4 R S 1000 150000 295 410 55 5 10 6 8 B F G H J K x10 2950 4100 1 2 3 5 10 Q 1 3 F H 125 11 T B P S 1 S 1 0 3 K 4 4 0 H 5 Q 1 2 3 4 6 7 8 3 5 7 Dimension mm Nominal Zero-Power Resistance Nominal B constantK 2 1.0x0.50402 1.6x0.80603 4 Shape P S0 S1 NTC THERMISTOR Plated terminal Packaging R S Tape&Reel Bulk example 102 154 1000 150000 example 295 410 Symbolx10 2950 4100 8 Resistance tolerance B constant tolerance 1 2 3 5 10 10 11 Min. temperature 55 5 10 Max. temperature 6 F G H J K 9 9 1 Type TB 472 5 F H 1 3 Q 125 11 Internal code Standard product Blank space Please read the "Notice for TAIYO YUDEN products" before using this catalog. EXTERNAL DIMENSIONS Type 10050402 16080603 L 1.00.05 W 0.50.05 T 0.50.05 e 0.250.10 0.0390.002 0.0200.002 0.0200.002 0.0100.004 1.60.15 0.80.15 0.80.15 0.350.25 0.0630.006 0.0310.006 0.0310.006 0.0140.010 UnitmmInch R-T R-T CHARACTERISTICS 1005type0402 1608type0603 k k k 9 k k THERMISTORS k k k k k k k k k k k k k k k k k k k k k k k k k k k k SPECIFICATIONS ToleranceSymbols 1% F, 2% G, 3% H, 5% J , 10% K R25 B 1% F , 3%H B Constant Selection Guide P.16 Part Numbers P.474 Electrical Characteristics P.475 Packaging P.476 Reliability Data P.478 Precautions Please contact our Sales Department. etc Please read the "Notice for TAIYO YUDEN products" before using this catalog. 473 PART NUMBERS 1005TYPE Ordering Code EHS Environmental Hazardous Substances B R25 [k] B constant K25/85 K25/50 constant T B P S 0 2 2 24 1 0 H 5 Q RoHS 2.2 4100 4034 T B P S 0 3 3 24 1 0 H 5 Q RoHS 3.3 4100 4034 T B P S 0 4 7 24 1 0 H 5 Q RoHS 4.7 4100 4034 T B P S 0 6 8 24 1 0 H 5 Q RoHS 6.8 4100 4034 T B P S 0 1 0 34 1 0 H 5 Q RoHS 10 4100 4034 T B P S 0 1 5 34 1 0 H 5 Q RoHS 15 4100 4034 T B P S 0 2 2 34 4 0 H 5 Q RoHS 22 4400 4336 T B P S 0 3 3 34 5 5 H 5 Q RoHS 33 4550 4483 T B P S 0 4 7 34 5 5 H 5 Q RoHS 47 4550 4483 T B P S 0 6 8 34 5 5 H 5 Q RoHS 68 4550 4483 T B P S 0 1 0 44 5 5 H 5 Q RoHS 100 4550 4483 T B P S 0 1 5 44 5 5 H 5 Q RoHS 150 4550 4483 Thermal time Dissipation 3 sec factor 0.52.0 mW/ Rated Power Remark 35mW RS J,K Please specify the packaging codeRtape & reel, SBulk and the resistance tolerance codeJ, K . 1608TYPE Ordering Code EHS Environmental Hazardous Substances B R25 B constant [k] K25/85 K25/50 T B P S 1 4 7 02 9 5 H 5 Q RoHS 0.047 2950 2934 T B P S 1 6 8 02 9 5 H 5 Q RoHS 0.068 2950 2934 T B P S 1 1 0 13 1 5 H 5 Q RoHS 0.100 3150 3157 T B P S 1 1 5 13 1 5 H 5 Q RoHS 0.150 3150 3157 T B P S 1 2 2 14 1 0 H 5 Q RoHS 0.22 4100 4034 T B P S 1 3 3 14 1 0 H 5 Q RoHS 0.33 4100 4034 T B P S 1 4 7 14 1 0 H 5 Q RoHS 0.47 4100 4034 T B P S 1 6 8 14 1 0 H 5 Q RoHS 0.68 4100 4034 T B P S 1 1 0 24 1 0 H 5 Q RoHS 1.0 4100 4034 T B P S 1 1 5 24 1 0 H 5 Q RoHS 1.5 4100 4034 T B P S 1 2 2 24 1 0 H 5 Q RoHS 2.2 4100 4034 T B P S 1 3 3 24 1 0 H 5 Q RoHS 3.3 4100 4034 T B P S 1 4 7 24 4 0 H 5 Q RoHS 4.7 4400 4336 T B P S 1 6 8 24 4 0 H 5 Q RoHS 6.8 4400 4336 T B P S 1 1 0 34 4 0 H 5 Q RoHS 10 4400 4336 T B P S 1 1 5 34 6 0 H 5 Q RoHS 15 4600 4533 T B P S 1 2 2 34 6 0 H 5 Q RoHS 22 4600 4533 T B P S 1 3 3 34 6 0 H 5 Q RoHS 33 4600 4533 T B P S 1 4 7 34 7 5 H 5 Q RoHS 47 4750 4642 T B P S 1 6 8 34 7 5 H 5 Q RoHS 68 4750 4642 T B P S 1 1 0 44 7 5 H 5 Q RoHS 100 4750 4642 T B P S 1 1 5 44 7 5 H 5 Q RoHS 150 4750 4642 T B P S 1 1 0 33 4 4 F 5 Q RoHS 10 3435 3395 Thermal time Dissipation constant 5 sec factor 1.02.5 mW/ Rated Power Remark 63mW RS J, KTBP S1 103 344 F 5QF,GH Please specify the packaging codeRtape & reel, SBulk and the resistance tolerance codeF,G or H for TBP S1 103 344 F 5Q J, K for other part numbers . 474 Please read the "Notice for TAIYO YUDEN products" before using this catalog. ELECTRICAL CHARACTERISTICS 1005type0402 High Temperature Life Test Test Condition 125 Damp Heatsteady state Test Condition 8595% 9 THERMISTORS 1608type0603 High Temperature Life Test Test Condition 125 Damp Heatsteady state Test Condition 8595% Please read the "Notice for TAIYO YUDEN products" before using this catalog. 475 PACKAGING Leader and Blank portion Minimum Quantity 10050402 Thickness mm 0.50.020 16080603 0.80.031 Type Standard quantitypcs Bulk Taping 10000 10000 2000 4000 Tape material 160mm 6.3inches or more 100mm 3.94inches or more Direction of tape feed 400mm 15.7inches or more Reel size 2.00.5 0.0790.031 13.00.2 0.5120.020 UnitmmInch Taping Dimensions Top Tape Strength 8mm Paper tape0.315inches wide 0.10.7N The top tape requires a peel;-off force of 0.10.7N in the direction of the arrow as illustrated below. Type 10050402 16080603 Insertion pitch Tape thickness Chip cavity A B F T 0.650.1 1.150.1 2.00.05 0.8max 0.0260.0040.0450.0040.0790.0020.031max 1.00.2 1.80.2 4.00.1 1.1max 0.0390.0080.0710.0080.1570.0040.043max UnitmmInch 476 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 1/2 RELIABILITY DATA MULTILAYER CHIP NTC THERMISTORS Specified Value Test Methods and Remarks Item 10050402 1. Operating Temperature Range 55 to 125 2. Storage Temperature Range 55 to 125 3. Rated Power 4. Nominal Zero-Power Resistance 5. Nominal B Constant 6. Dissipation Constantsingle unit 35mW 63mW 0.047150k Ambient temperature250.2 5 5 Measuring electric power0.1mW max. 10 10 41004550K 29504750K 3 3 0.5 to 2.0mW 1.0 to 2.5mW This represents the amount of electric power required to raise the temperature of the element by 1 through self-heating under thermal equilibrium. Within 5 sec. This represents the amount of time for the temperature of the thermistor element to change by 63.2 of the difference between the initial temperature and the ambient temperature by the drastic change of power application into thermistor from non-zero-power to zero-power state. 2.2150k Within 3 sec. 8. Rated Ambient Temperature Measure the resistance at the ambient temperatures of 250.2 and 850.2. This represents the maximum ambient temperature at which rated power could be applied. 25 This represents the relations between the ambient temperature and the maximum permissible power. 9. Electric Power Derating Curve As shown in the figure at right. 10. Resistance to Flexure of Substrate R25 changeWithin 3 R25 changeWithin 5 Warp2mm B constant change B constant change Testing boardglass-epoxy-resin substrate Within 1 Within 2 9 THERMISTORS 7. Thermal Time Constantsingle unit 16080603 Board thickness0.8mm Pressing speed0.5mmsec. Duration30 sec. 11. Adhesion of Terminal Electrode R25 changeWithin 3 R25 changeWithin 5 Applied force5N B constant change B constant change Duration10sec. Within 1 Within 2 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 479 2/2 RELIABILITY DATA MULTILAYER CHIP NTC THERMISTORS Specified Value Item 10050402 12. Solderability 13. Resistance to Soldering Test Methods and Remarks 16080603 At least 75% of terminal At least 80% of terminal According to JIS C5102 clause 8.4. electrode is covered by new electrode is covered by new Solder temperature2305 solder. solder. Duration41 sec. R25 changeWithin 3 R25 changeWithin 5 Reflow soldering B constant change B constant change Solder temperature240 Within 1 Within 2 Duration5 sec. Preheating temperature150 Preheating time90 sec. Number of reflows3 times testing substrateglass-epoxy-resin substrate 14. Thermal Shock R25 changeWithin 3 R25 changeWithin 5 Conditions for 1 cycle B Constant change B Constant change Step1Minimum operating temperature 03 Within 1 Within 3 Step2Room temperature Step3Maximum operating temperature 03 Step4Room temperature 303 min 2 to 3 min 303 min 2 to 3 min Number of cycles5 15. High Temperature Life Test R25 changeWithin 3 R25 changeWithin 5 Temperature1252 B Constant change B Constant change Duration100012 hrs Within 1 Within 3 Recovery2 hrs of recovery under the standard condition after the removal from test chamber. testing substrateglass-epoxy-resin substrate 16. Damp Heatsteady state R25 changeWithin 3 R25 changeWithin 5 Temperature852 B Constant change B Constant change Humidity855RH Within 1 Within 3 THERMISTORS Recovery2 to 3 hrs of recovery under the standard condition after the test. 9 Duration100012 hrs Recovery2 hrs of recovery under the standard condition after the removal from test chamber. testing substrateglass-epoxy-resin substrate Note on standard condition"standard condition" referred to herein is defined as follows 5 to 35 of temperature, 45 to 85 relative humidity and 86 to 106kPa of air pressure. When there are questions concerning measurement results In order to provide correlation data, the test shall be conducted under condition of 202 of temperature, 60 to 70 relative humidity and 86 to 106kPa of air pressure. Unless otherwise specified, all the tests are conducted under the "standard condition." Please read the "Notice for TAIYO YUDEN products" before using this catalog. 481