Time-Delay Ferrule Fuse FNM
13/32” x 1-1/2”
Form No. FNM
Page 1 of 2
BIF Doc #2028
Bussmann®
1-18-00
N99107 Rev. A
Carton Quantity and Weight
Ampere Carton Weight
Ratings Qty Lbs. Kg.
0-30 10 .125 .057
FNM-12
FNM-15
–
–
32 Volts AC
FNM-20
FNM-25
FNM-30
-
–
–
–
-
Electrical Ratings (Catalog Symbol and Amperes)
250 Volts AC IR 250 Volts AC IR 250 Volts AC IR 125 Volts AC
1.5"
(50.031)
(38.1mm)
.41"
(50.004)
(10.3mm)
CATALOG SYMBOL: FNM
TIME-DELAY
1/10 TO 30 AMPERES
INTERRUPTING RATING - SEE CHART BELOW
UL LISTED: STD. 248-14, 0-10/250V AC; 12-15/125V AC
FILE #E19180, GUIDE #JDYX
CSA CERTIFIED: 1-10/250V AC; CLASS 1422-01,
12-15/125V AC; FILE 53787
DC RATING: 1-15A rated 125V DC and 1.6 KAIC.
FNM-1/10
FNM-1/8
FNM-15/100
FNM-2/10
FNM-1/4
FNM-3/10
FNM-4/10
FNM-1/2
FNM-6/10
FNM-3/4
FNM-8/10
FNM-1
–
FNM-1-1/8
FNM-1-1/4
FNM-1-4/10
FNM-1-1/2
FNM-1-6/10
FNM-1-8/10
FNM-2
FNM-2-1/4
FNM-2-1/2
FNM-2-8/10
FNM-3
FNM-3-2/10
FNM-3-1/2
FNM-4
FNM-4-1/2
FNM-5
FNM-5-6/10
FNM-6
FNM-6-1/4
FNM-7
FNM-8
FNM-9
FNM-10
–
–
–
Fuseblock Catalog Numbers
Poles Terminal Type
Screw With Pressure Plate Box
Quick Connect w/Quick Connect Lug
1 BM6031SQ BM6031PQ BM6031B
2 BM6032SQ BM6032PQ BM6032B
3 BM6033SQ BM6033PQ BM6033B
35A@
250VAC
10,000
@
125VAC
100A@
250VAC
10,000
@
125VAC
200A@
250VAC
10,000 @
125VAC
10,000
@ 125V AC
• Fibre tube.
• For circuits with high inrush currents.
• Formerly designated 5AB.
• Fusetron®Dual-Element fuse.
If 250V AC is needed for 12-30 amps, use FNW series.
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000V AC, 75-1500V DC). Refer to BIF document #8002 or contact
Bussmann Application Engineering at 636-527-1270 for more information.
Time-Delay Ferrule Fuse FNM
13/32” x 1-1/2”
Bussmann®
Form No. FNM
Page 2 of 2
BIF Doc #2028
1-18-00
N99107 Rev. A
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to
clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any
products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been select-
ed, it should be tested by the user in all possible applications.
Time-Current Characteristic Curves–Average Melt
