ER1600CT - ER1606CT WTE POWER SEMICONDUCTORS Pb 16A GLASS PASSIVATED DUAL SUPERFAST RECTIFIER Features ! Glass Passivated Die Construction ! ! ! ! ! Super-Fast Switching Low Forward Voltage Drop C Low Reverse Leakage Current High Surge Current Capability G Plastic Material has UL Flammability Classification 94V-O D B Mechanical Data ! ! ! ! ! ! ! A PIN1 2 3 F Case: TO-220, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 2.24 grams (approx.) Mounting Position: Any Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. Lead Free: For RoHS / Lead Free Version, Add "-LF" Suffix to Part Number, See Page 4 TO-220 Dim Min Max 13.90 15.90 A 9.80 10.70 B 2.54 3.43 C 3.56 4.56 D 12.70 14.73 E 0.51 0.96 F 3.55 O 4.09 O G 5.75 6.85 H 4.16 5.00 I 2.03 2.92 J 0.30 0.65 K 1.14 1.40 L 2.29 2.79 P All Dimensions in mm E P I H L PIN 1 - J + PIN 3 - Case, PIN 2 K Maximum Ratings and Electrical Characteristics @TA=25C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current VRRM VRWM VR 50 100 150 200 300 400 600 V VR(RMS) 35 70 105 140 210 280 420 V IO 16 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 125 A Forward Voltage @IF = 8.0A VFM @TA = 25C @TA = 125C IRM Peak Reverse Current At Rated DC Blocking Voltage @TC = 105C ER ER ER ER ER ER ER Unit 1600CT 1601CT 1601ACT 1602CT 1603CT 1604CT 1606CT 0.95 1.3 1.7 10 500 V A Reverse Recovery Time (Note 1) trr 35 50 nS Typical Junction Capacitance (Note 2) Cj 80 60 pF Operating and Storage Temperature Range Tj, TSTG -65 to +150 C Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. ER1600CT - ER1606CT 1 of 4 (c) 2006 Won-Top Electronics IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 20 16 12 8 4 0 0 50 100 100 1600 - 1602 1606 1.0 Pulse width = 300s 2% duty cycle 0.1 0 150 TC, CASE TEMPERATURE (C) Fig. 1 Forward Current Derating Curve 0.6 1.2 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 400 225 Tj = 25C f = 1.0MHz 8.3 ms single half-sine-wave JEDEC method Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 1603 - 1604 10 150 75 100 ER1600CT ER1602CT ER1603CT ER1606CT 10 0 1 0.1 100 10 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60Hz Fig. 3 Maximum Non-Repetitive Surge Current trr +0.5A 50 NI (Non-inductive) 10 NI Device Under Test (+) (-) 0A Pulse Generator (Note 2) 50V DC Approx (-) 1.0 NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0M, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50. -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit ER1600CT - ER1606CT 2 of 4 (c) 2006 Won-Top Electronics MARKING INFORMATION WTE ER160xCT WTE ER160xCT x Polarity = Manufacturer's Logo = Device Number = 0, 1, 1A, 2, 3, 4 or 6 = As Marked on Body PACKAGING INFORMATION BULK Tube Size L x W x H (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 525 x 31 x 6 50 555 x 145 x 95 2,000 572 x 306 x 218 8,000 19.0 Note: 1. Anti-static tube, water clear color. RECOMMENDED SCREW MOUNTING ARRANGEMENT Recommended isolated mounting when screw is at heatsink potential. 4-40 hardware is used. 4-40 PAN or HEX Head Screw Plain Washer Screw should not be tightened with any type of air-forced torque or equipment that may cause high impact on device package. The insulating bushing inside the mounting hole will insure the screw threads do not contact the metal base. The interface should apply a layer of thermal grease or a highly conductive thermal pad for better heat dissipation. ER1600CT - ER1606CT Insulating Bushing Rectifier Insulator Heatsink Compression Washer 4-40 HEX Nut 3 of 4 (c) 2006 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity ER1600CT TO-220 50 Units/Tube ER1601CT TO-220 50 Units/Tube ER1601ACT TO-220 50 Units/Tube ER1602CT TO-220 50 Units/Tube ER1603CT TO-220 50 Units/Tube ER1604CT TO-220 50 Units/Tube ER1606CT TO-220 50 Units/Tube 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add "-LF" suffix to part number above. For example, ER1600CT-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com We power your everyday. ER1600CT - ER1606CT 4 of 4 (c) 2006 Won-Top Electronics