North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662
1
Special Features
Electrical Specs
Special Features
30 Watts
• Point of load (POL) applications
• High efficiency, 3.3V@93%
• -40°C to +85°C Ambient operating
temperature
• Open Frame SMT
• Positive enable function
• Low output ripple and noise
• Regulation to zero load
• Adjustable Output through external resistor
programming
• Fixed frequency switching (400 kHz)
• EU Directive 2002/95/EC compliant for RoHS
Input
Input range 1.8-6.0VDC and 6.5-13.0VDC
Input Surge 08 Device: 14V
03 Device: 7V
Efficiency 93%@3.3V
Control
Enable TTL compatible
(positive enable option)
Output
Regulation
(Line, Load, Temp) <3%
Ripple and noise 100mV (5V and 6V)
75mV (2.5V and 3.3V)
50mV (below 2.5V)
Output voltage
adjust range 08 Device: 0.9V to 6.2V
03 Device: 0.9V to 3.6V
Transient Response 5% max deviation with
50% to 75% full load
500 μS (max) recovery
Specifications subject to change without notice.
Operating temperature
-40°C to +85°C
Storage temperature: -55°C to +125°C
Demonstrated MTBF: > 2.3 Million Hours
UL, cUL 60950 Recognized
TUV EN60950 Licensed
Environmental
Total Power: 30W
Input Voltages: 1.8V - 13V
No. of Outputs: Single
Safety
Astec Industry Standard
APC08 (8 Amp)
12.01.06
Input Output Efficiency Model Number
Voltage Voltage Full Load
1.8V-6.0V 0.9V @ 8A 76% (Typ)* APC08J03
1.8V-6.0V 1.2V @ 8A 81% (Typ) APC08K03
1.8V-6.0V 1.5V @ 8A 86% (Typ) APC08M03
2.2V-6.0V 1.8V @ 8A 88% (Typ) APC08Y03
3.0V-6.0V 2.5V @ 8A 91% (Typ) APC08G03
4.0V-6.0V 3.3V @ 8A 93% (Typ) APC08F03
6.5V-13.0V 0.9V @ 8A 75% (Typ) APC08J08
6.5V-13.0V 1.2V @ 8A 81% (Typ) APC08K08
6.5V-13.0V 1.5V @ 8A 84% (Typ) APC08M08
6.5V-13.0V 1.8V @ 8A 86% (Typ) APC08Y08
6.5V-13.0V 2.5V @ 8A 90% (Typ) APC08G08
6.5V-13.0V 3.3V @ 8A 92% (Typ) APC08F08
* Typical Efficiency is measured at full load, mid range input and at TA=25°C
Options: suffix “-9” = Output Trim option
suffix “-9MA” = Output Trim with Ishare and PGood options
suffix “-J” = Jedec Style Tray Packaging (Default packaging is T&R with no “-J” suffix required)
suffix “L” = RoHS compliant (RoHS 6) / Blank = RoHS compliant with Lead (pb) in solder exemption (RoHS5)
EEUURROOPPEE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
AAMMEERRIICCAASS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
2
Ordering Information
www.astecpower.com
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Kwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
APC08 Astec Industry
Standard
MMeecchhaanniiccaall DDiimmeennssiioonnss
Tolerances:
x.xx +/- 0.02 in (x.x +/- 0.5mm)
x.xxx +/- 0.010 in (x.xx +/- 0.25mm
Note:
1. Specifications given are typical values at nominal
conditions.
2. The Technical Reference Notes should be
consulted for detailed information.
3. Specifications subject to change without notice.
Mechanical drawings are for reference only
PPiinn SSiiddee DDoowwnn [[ddiimmeennssiioonnss iinn mmmm]]
Optional Pins:
PGood - Power Good Logic Signal
P - Active Current Share Pin
Trim - Trim Pin
Typ
