Astec Industry Standard 30 Watts Total Power: Input Voltages: No. of Outputs: 30W 1.8V - 13V Single APC08 (8 Amp) Electrical Specs Input Input range Input Surge Efficiency 1.8-6.0VDC and 6.5-13.0VDC 08 Device: 14V 03 Device: 7V 93%@3.3V Control Enable TTL compatible (positive enable option) Output Regulation (Line, Load, Temp) Special Features Ripple and noise * Point of load (POL) applications * High efficiency, 3.3V@93% * -40C to +85C Ambient operating temperature * Open Frame SMT * Positive enable function * Low output ripple and noise * Regulation to zero load * Adjustable Output through external resistor programming * Fixed frequency switching (400 kHz) * EU Directive 2002/95/EC compliant for RoHS Output voltage adjust range Transient Response <3% 100mV (5V and 6V) 75mV (2.5V and 3.3V) 50mV (below 2.5V) 08 Device: 0.9V to 6.2V 03 Device: 0.9V to 3.6V 5% max deviation with 50% to 75% full load 500 S (max) recovery Specifications subject to change without notice. Environmental Operating temperature -40C to +85C Storage temperature: -55C to +125C Demonstrated MTBF: > 2.3 Million Hours Safety UL, cUL 60950 Recognized TUV 1 EN60950 Licensed North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 12.01.06 AMERICAS EUROPE ASIA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Kwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 APC08 Ordering Information Input Voltage Output Voltage Efficiency Full Load Model Number 1.8V-6.0V 1.8V-6.0V 1.8V-6.0V 2.2V-6.0V 3.0V-6.0V 4.0V-6.0V 0.9V @ 8A 1.2V @ 8A 1.5V @ 8A 1.8V @ 8A 2.5V @ 8A 3.3V @ 8A 76% (Typ)* 81% (Typ) 86% (Typ) 88% (Typ) 91% (Typ) 93% (Typ) APC08J03 APC08K03 APC08M03 APC08Y03 APC08G03 APC08F03 6.5V-13.0V 6.5V-13.0V 6.5V-13.0V 6.5V-13.0V 6.5V-13.0V 6.5V-13.0V 0.9V @ 8A 1.2V @ 8A 1.5V @ 8A 1.8V @ 8A 2.5V @ 8A 3.3V @ 8A 75% (Typ) 81% (Typ) 84% (Typ) 86% (Typ) 90% (Typ) 92% (Typ) APC08J08 APC08K08 APC08M08 APC08Y08 APC08G08 APC08F08 * Typical Efficiency is measured at full load, mid range input and at TA=25C Options: suffix "-9" = Output Trim option suffix "-9MA" = Output Trim with Ishare and PGood options suffix "-J" = Jedec Style Tray Packaging (Default packaging is T&R with no "-J" suffix required) suffix "L" = RoHS compliant (RoHS 6) / Blank = RoHS compliant with Lead (pb) in solder exemption (RoHS5) Mechanical Dimensions Tolerances: x.xx +/- 0.02 in (x.x +/- 0.5mm) x.xxx +/- 0.010 in (x.xx +/- 0.25mm Typ Pin Side Down [dimensions in mm] Note: 1. Specifications given are typical values at nominal conditions. 2. The Technical Reference Notes should be consulted for detailed information. 3. Specifications subject to change without notice. Mechanical drawings are for reference only www.astecpower.com Astec Industry Standard Optional Pins: PGood - Power Good Logic Signal P - Active Current Share Pin Trim - Trim Pin 2