Fea tures
•Low Cost
•High Speed
•No Mounting Hardware Required
•Wide Temperature Range
•100% LED Burn-In (96 hours)
•ST* Style Port
•Wave Solderable
De scrip tion
The OPF14XX series fiber optic
transmitters contain a high speed 840
nm GaAlAs LED. This LED in
conjunction with the package lensing is
designed to efficiently couple light into
optical fibers ranging in size from
50/125 µm up to 200 µm PCS. These
devices were designed to work
together with the Optek OPF24XX
series receivers to make-up a complete
high speed fiber optic link.
The high coupling efficiency of the LED
and lensing allows the devices to be
used at low current drive levels thus
decreasing the power consumption and
increasing system reliability. The
consistency of coupling varies by less
than 5 dB from part to part which
reduces the dynamic range
requirements of the receiver.
The high power (-16.5 dBm into 50/125
µm) OPF1414 was designed for small
fiber applications or where there are
large fixed losses such as in systems
that contain star couplers or in line
connectors. The OPF1412 (-11.5 dBm
optical power) is ideal for 100/140 µm
fiber applications.
Ab so lute Maxi mum Rat ings (TA = 25o C un less oth er wise noted)
Stor age Tem pera ture ...................................... -55o C to +85o C
Op er at ing Tem pera ture .................................... -40o C to +85o C
Lead Sol der ing Tem pera ture ................................. 260o C(10 sec)
For ward In put Cur rent........................................ Peak 200 mA
........................................DC 100 mA
Re verse In put Volt age .............................................. 1.8 V
See Me chani cal Di men sions page 8-19 for Me chani cal Draw ings.
Avail able in Panel Mount ST* pack age; add “T” suf fix to part number.
Prod uct Bul le tin OPF1412/1414
De cem ber 1997
High Speed Fiber Optic Transmitter
Types OPF1412/1414 Se ries
Bot tom View
PIN FUNC TION
1N.C.
2Anode
3Cathode
4N.C.
5N.C.
6Anode
7Anode
8N.C.
Op tek Tech nol ogy, Inc. 1215 W. Crosby Road Car roll ton, Texas 75006 (972) 323- 2200 Fax (972)323- 2396
This component is susceptible to damage from electrostatic discharge (ESD). Normal
static precautions should be taken in handling and assembly of this component to
prevent ESD damage or degradation.
8-4