Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr LC Combined Type Data Sheet 1 Block Type EMIFILr LC Combined Type BNX01* Series Dimensions Insertion Loss Characteristics 11.00.2 12.00.2 (50 - 50) 8.00.5 0 0.8 0.1 7.50.2 12.00.5 20 o0.8 0.1 0.6 0.1 o0.8 0.1 2.50.2 30 Insertion Loss (dB) 0.8 0.1 10 4.00.5 3.20.5 BNX*** 2.50.2 *** : 012/016 40 BNX012-01 50 60 BNX016-01 70 PSG: Power supply ground CG: Load circuit ground CB: Load circuit + Bias CB CG 80 CG PSG 90 0.001 Equivalent Circuit 0.1 10 100 1000 Code Packaging Minimum Quantity - Box 150 L3 C2 B L2 1 Frequency (MHz) Packaging L1 (1) 0.01 (in mm) B CB (2) C1 CG (4) (3) PSG (1)-(4): Terminal Number PSG: Power Supply Ground CG: Circuit Ground CB: Circuit+B Rated Value Part Number Rated Voltage Withstand Voltage Rated Current Insulation Resistance(min.) Insertion Loss BNX012-01 50Vdc 125Vdc 15A 500M ohm 1MHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm) BNX016-01 25Vdc 62.5Vdc 15A 50M ohm 100kHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm) Operating Temperature Range: -40C to 125C In operating temperatures exceeding +85C, derating of current is necessary. Continued on the following page. o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2009.1.8 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr LC Combined Type Data Sheet 2 Continued from the preceding page. Notice (Rating) " Rating Derating 15 Derated Current [A] In operating temperatures exceeding +85C, derating of current is necessary for BNX01p series. Please apply the derating curve shown in chart according to the operating temperature. 10 5 1 0 -40 85 102.5 120 125 Operating Temperature [C] " Connecting power line In case of using power line, please connect to each terminal as shown. Power Supply (BNX Input) Power Supply +Bias Power Supply Ground Power Supply -Bias Power Supply Ground BNX Circuit (BNX Output) B PSG CB CG Load Circuit +Bias B PSG CB CG Load Circuit -Bias Load Circuit Ground Load Circuit Ground !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2009.1.8 http://www.murata.com/