© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3017_PME271YA_Y2_300 • 4/25/2013 1
One world. One KEMET
Benets
• Approvals: ENEC, UL, CSA, CQC
• Rated voltage: 300 VAC 50/60 Hz
• Capacitance range: 0.001 – 0.15 µF
• Lead spacing: 10.2 – 25.4 mm
• Capacitance tolerance: ±20% for C > 0.1 µF, ±10% for C ≤ 0.1 µF
• Climatic category: 40/115/56/B, IEC 60068–1
• Tape and reel packaging in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Operating temperature range of -40˚C to +115˚C
• 100% screening factory test at 3,000 VDC
• The highest possible safety regarding
active and passive ammability
• Excellent self-healing properties
ensure long life even when subjected to
frequent over-voltages
• Good resistance to ionization due to
impregnated dielectric
• High dV/dt capability
• Impregnated paper ensures excellent
stability and reliability properties,
particularly in applications with continuous operation
Overview
The PME271Y A–E Series is constructed of multilayer metallized
paper encapsulated and impregnated in self-extinguishing
material meeting the requirements of UL 94 V–0.
Applications
Typical applications include worldwide use as electromagnetic
interference suppressor in all Y2 applications, line-to-earth.
AC Line EMI Suppression and RC Networks
PME271Y A–E Series Metallized Impregnated Paper,
Class Y2, 300 VAC
Legacy Part Number System
PME271 Y A 4100 MR30
Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Capacitance
Tolerance Lead and
Packaging Code
Y2, Metallized Paper Y = 300 A = 10.2
B = 15.2
C = 20.3
D = 22.5
E = 25.4
Digits 2 – 4(3) indicates the rst
three digits of the capacitance
value. First digit indicates the total
number of digits in the capacitance
value.
M = ±20%
(for C ≤ 0.1 µF)
K = ±10%
(for C > 0.1 µF)
See Ordering
Options Table
New KEMET Part Number System
P272 H E 102 M300 A
Capacitor
Class Series Lead Spacing (mm) Size Code Capacitance Code (pF) Capacitance
Tolerance Rated Voltage
(VAC)
Lead and
Packaging Code
P = Paper Y2, Metallized
Paper
H = 10.2
Q = 15.2
C = 20.3
D = 22.5
E = 25.4
See Dimension
Table
First two digits indicate the
two most signicant digits
of the capacitance value in
picofarads. The third digit
is the number of following
zeros.
M = ±20%
(for C ≤ 0.1 µF)
K = ±10%
(for C > 0.1 µF)
300 = 300 See Ordering
Options Table
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3017_PME271YA_Y2_300 • 4/25/2013 2
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Ordering Options Table
Lead
Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
KEMET
Lead and
Packaging
Code
Legacy
Lead and
Packaging
Code
10.2
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads 6 +0/-1 CR06
Bulk (Bag) – Max Length Leads 30 +5/-0 A R30
Tape & Reel (Standard Reel) H
0
= 18.5 +/-0.5 L R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel) H
0
= 18.5 +/-0.5 P R19T1
Native 10.2
formed to 7.5 Ammo Pack H0= 16.5 +/-0.5 LAF3 R30XA
15.2
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads 6 +0/-1 CR06
Bulk (Bag) – Max Length Leads 30 +5/-0 A R30
Tape & Reel (Standard Reel) H
0
= 18.5 +/-0.5 L R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel) H
0
= 18.5 +/-0.5 P R19T1
20.3
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads 6 +0/-1 CR06
Bulk (Bag) – Max Length Leads 30 +5/-0 A R30
Tape & Reel (Standard Reel) H
0
= 18.5 +/-0.5 L R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel) H
0
= 18.5 +/-0.5 P R19T1
22.5
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads 6 +0/-1 CR06
Bulk (Bag) – Max Length Leads 30 +5/-0 A R30
Tape & Reel (Standard Reel) H
0
= 18.5 +/-0.5 L R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel) H
0
= 18.5 +/-0.5 P R19T1
25.4
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads 6 +0/-1 CR06
Bulk (Bag) – Max Length Leads 30 +5/-0 A R30
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3017_PME271YA_Y2_300 • 4/25/2013 3
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Dimensions – Millimeters
L
H
B
d
p
LL
p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
10.2 +/-0.4 3.9 Maximum 7.5 Maximum 13.5 Maximum 0.6 +/-0.05
10.2 +/-0.4 4.1 Maximum 8.2 Maximum 13.5 Maximum 0.6 +/-0.05
10.2 +/-0.4 5.1 Maximum 10.5 Maximum 13.5 Maximum 0.6 +/-0.05
15.2 +/-0.4 5.2 Maximum 10.5 Maximum 18.5 Maximum 0.8 +/-0.05
15.2 +/-0.4 5.5 Maximum 11 Maximum 18.5 Maximum 0.8 +/-0.05
15.2 +/-0.4 7.3 Maximum 13 Maximum 18.5 Maximum 0.8 +/-0.05
20.3 +/-0.4 7.6 Maximum 14 Maximum 24 Maximum 0.8 +/-0.05
20.3 +/-0.4 9 Maximum 15 Maximum 24 Maximum 0.8 +/-0.05
20.3 +/-0.4 11.3 Maximum 16.5 Maximum 24 Maximum 0.8 +/-0.05
22.5 +/-0.4 8 Maximum 17 Maximum 27 Maximum 0.8 +/-0.05
22.5 +/-0.4 10 Maximum 19 Maximum 27 Maximum 0.8 +/-0.05
22.5 +/-0.4 12 Maximum 22 Maximum 27 Maximum 0.8 +/-0.05
25.4 +/-0.4 12.1 Maximum 19 Maximum 30.5 Maximum 1 +/-0.05
25.4 +/-0.4 15.3 Maximum 22 Maximum 30.5 Maximum 1 +/-0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3017_PME271YA_Y2_300 • 4/25/2013 4
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Performance Characteristics
Rated Voltage 300 VAC 50/60 Hz
Capacitance Range 0.001 – 0.15 µF
Capacitance Tolerance ± 20% for C ≤ 0.1µF, ± 10% for C > 0.1µF
Temperature Range -40ºC to +115°C
Climatic Category 40/115/56/B
Approvals ENEC, UL, CSA, CQC
Dissipation Factor
Maximum Values at +23°C
1 kHz 1.3%
Test Voltage Between Terminals
The 100% screening factory test is carried out at 3,000 VDC. The
voltage level is selected to meet the requirements in applicable
equipment standards. All electrical characteristics are checked
after the test. It is not permitted to repeat this test as there is a risk
to damage the capacitor. KEMET is not liable in such case for any
failures.
Insulation Resistance
Minimum Value Between Terminals
≥ 12,000 MΩ
In DC Applications Recommended voltage ≤ 1,000 VDC
Environmental Test Data
Test IEC Publication Procedure
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 500 Hz at 0.75 mm or 98 m/s2
Bump IEC 60068–2–29 Test Eb 4,000 bumps at 390 m/s2
Solderability IEC 60068–2–20 Test Ta Solder globule method
Active Flammability IEC 60384–14
Passive Flammability IEC 60384–14 Needle-ame test
Humidity IEC 60068–2–3 Test Ca +40°C and 90 – 95% RH
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3017_PME271YA_Y2_300 • 4/25/2013 5
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Approvals
Mark Specication File Number
EN/IEC 60384–14 SE/0140–27C
UL 1283 (250 VAC) E100117
CSA – C22.2 No. 8 (250 VAC) E100117
CQC 10001043354
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
Table 1 – Ratings & Part Number Reference
Capacitance
Value (µF)
Maximum Dimensions in mm Lead
Spacing (p)
fo
(MHz)
dV/dt
(V/µs)
New KEMET
Part Number
Legacy Part
Number
B H L
0.0010 3.9 7.5 13.5 10.2 53.0 2000 P272HE102M300(1) PME271YA4100M(1)
0.0015 3.9 7.5 13.5 10.2 44.0 2000 P272HE152M300(1) PME271YA4150M(1)
0.0022 3.9 7.5 13.5 10.2 37 2000 P272HE222M300(1) PME271YA4220M(1)
0.0025 4.1 8.2 13.5 10.2 35 2000 P272HH252M300(1) PME271YA4250M(1)
0.0033 4.1 8.2 13.5 10.2 30 2000 P272HH332M300(1) PME271YA4330M(1)
0.0047 5.1 10.5 13.5 10.2 24 2000 P272HL472M300(1) PME271YA4470M(1)
0.0068 5.2 10.5 18.5 15.2 19 1400 P272QE682M300(1) PME271YB4680M(1)
0.0100 5.2 10.5 18.5 15.2 16 1400 P272QE103M300(1) PME271YB5100M(1)
0.0150 5.5 11 18.5 15.2 13 1400 P272QH153M300(1) PME271YB5150M(1)
0.0220 7.3 13 18.5 15.2 9.8 1400 P272QM223M300(1) PME271YB5220M(1)
0.0330 7.6 14 24 20.3 71000 P272CE333M300(1) PME271YC5330M(1)
0.0470 915 24 20.3 61000 P272CJ473M300(1) PME271YC5470M(1)
0.0680 11.3 16.5 24 20.3 4.6 1000 P272CP683M300(1) PME271YC5680M(1)
0.0330 817 27 22.5 6.8 600 P272SJ333M300(1) PME271YD5330M(1)
0.0470 817 27 22.5 5.8 600 P272SJ473M300(1) PME271YD5470M(1)
0.0680 10 19 27 22.5 4.8 600 P272SP683M300(1) PME271YD5680M(1)
0.1000 12 22 27 22.5 3.8 600 P272SU104M300(1) PME271YD6100M(1)
0.1000 12.1 19 30.5 25.4 3.9 400 P272EJ104M300(1) PME271YE6100M(1)
0.1500 15.3 22 30.5 25.4 3.1 400 P272EL154K300(1) PME271YE6150K(1)
Capacitance
Value (µF) B (mm) H (mm) L (mm) Lead Spacing
(p) fo (MHz) dV/dt
(V/µs)
New KEMET
Part Number Legacy Part Number
(1) Insert ordering code for lead type and packaging. See Ordering Options Table for available options.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3017_PME271YA_Y2_300 • 4/25/2013 6
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Soldering Process
The implementation of the RoHS Directive has required the use
of SnAuCu (SAC) or SnCu alloys as primary solder. These alloys
require a higher liquidus temperature (217ºC – 221ºC) as compared
to SnPb eutectic alloy (183ºC). Due to the higher pre-heat and
wave temperatures, the heat stress to components has increased
considerably. Polypropylene capacitors are especially sensitive
to soldering temperature due to the relatively low melting point of
polypropylene material (160ºC – 170ºC). As a result, wave soldering
can be destructive, especially to mechanically small polypropylene
capacitors with lead spacings of 5 –10 mm. For more information,
please refer to KEMET's Recommended Soldering Proles or contact
a KEMET representative. IEC Publication 61760–1 Edition 2 may
also be consulted for general guidelines.
Marking
• KEMET’s logo
• Series
• Capacitance
• Rated voltage
• Capacitor class
• Approval marks
• IEC climatic category
• Passive ammability class
• Manufacturing date code
• SH for self-healing
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3017_PME271YA_Y2_300 • 4/25/2013 7
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Packaging Quantities
Lead Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long Leads
Standard Reel
ø 360 mm
Large Reel
ø 500 mm
Ammo
Formed
10.2
7.5
13.5
2000
1000
700
1400
800
4.1 8.2 13.5 2000 1000 600 780
5.1 10.5 13.5 1600 800 600 1200 630
15.2
5.5 12.5 18 1000 500 600
6.5 12.5 18 600 400 400
7.5 14.5 18 600 400 400
8.5 16 18 400 250 400
5.2 10.5 18.5 1000 500 600
5.5 11 18.5 1000 500 500
612.5 18.5 600 400 400
7.3 13 18.5 600 400 400 800
7.8 13.5 18.5 600 400 400
8.5 14.3 18.5 500 300 350
20.3
7.6 14 24 1500 250 250 500
8.4 14 24 1200 200 250 500
915 24 1500 200 250
11.3 16.5 24 1000 150 180 400
22.5
817 27 1200 200
10 19 27 1000 150 200
12 22 27 800 100 180 350
25.4
16.1
30.5
1000
150
10.5 17.3 30.5 1000 100
12.1 19 30.5 800 100
15.3 22 30.5 600 75
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3017_PME271YA_Y2_300 • 4/25/2013 8
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm Standard IEC 60286–2
Lead spacing +6/-0.1 F
Formed
7.5
10.2 15.2 20.3 22.5 F
Carrier tape width +/-0.5 W18 18 18 18 18 18+1/-0.5
Hold-down tape width +/-0.3 W
0
912 12 12 12
Position of sprocket hole +/-0.5 W199999 9+0.75/-0.5
Distance between tapes Maximum W233333 3
Sprocket hole diameter +/-0.2 D044444 4
Feed hole lead spacing +/-0.3 P0
(1) 12.7(4) 12.7 12.7 12.7 12.7 12.7
Distance lead – feed hole +/-0.7 P
1
3.75 7.6 5.1 8.9 5.3 P1
Deviation tape – plane Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3
Lateral deviation Maximum ∆h 22222 2
Total thickness +/-0.2 t0.7 0.7 0.7 0.7 0.9MAX 0.9MAX
Sprocket hole/cap body Nominal H
0
(2) 18+2/-0 18+2/-0 18+2/-0 18+2/-0 18.5+/-0.5 18+2/-0
Sprocket hole/top of cap body Maximum H1
(3) 35 35 35 35 58 58MAX
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request. (3) Depending on case size.
(4) 15 mm available on request.
Lead Spacing 10.2 – 15.2 mm
Lead Spacing 20.3 – 22.5 mm
Formed Leads from 10.2 to 7.5 mm
0
0
0
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3017_PME271YA_Y2_300 • 4/25/2013 9
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
H
T
W
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Series Dimensions (mm)
H W T
R4x, R4x+R, R7x, RSB
360 340 59F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx 330 330 50
Reel Speci cations
Series Dimensions (mm)
D H W
R4x, R4x+R, R7x, RSB 355
500
30
25 55 (Max)F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
360
500
30 46 (Max)
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year Code Month Code
2000 MJanuary 1
2001 NFebruary 2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006
U
July
7
2007
V
August
8
2008 WSeptember 9
2009 XOctober O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015
F
2016
H
2017 J
2018
K
2019
L
2020
M
D
W
H
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3017_PME271YA_Y2_300 • 4/25/2013 10
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Sasso Marconi, Italy
Tel: 39-051-939111
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Kamen, Germany
Tel: 49-2307-438110
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3017_PME271YA_Y2_300 • 4/25/2013 11
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Other KEMET Resources
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Electrolytic LifeCalculator http://www.kemet.com:8080/elc
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET speci cally disclaims – any warranty concerning suitability for a speci c customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3017_PME271YA_Y2_300 • 4/25/2013 12
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing Communications,
cn=Jeannette Calvo, email=jeannettecalvo@kemet.com
Date: 2013.04.29 10:39:39 -04'00'