Eighth-Brick Series Single output DC/DC CONVERTERS High Current, High y, Low 1 NEW Product * * * * * * * * * * Ultra-high e ciency topology Industry standard eighth brick footprint (identical to quarter-brick pinout) Low pr through-hole version Low pr with 38% space savings over other quarter-brick brick converters Wi de ambient temperature range, -40 C to +85 C 80% to 110% output trim Monotonic start-up in normal and prebiased loads Basic insulation system Overvoltage and overtemperature protection Secondary side control, no optocouplers, fast transient response * 100 V, 100 ms input voltage transient rated * Available RoHS compliant This is a new high e ciency, open-frame, low pr single board, isolated dc-dc converter series in an industry standard eight-brick footprint that provides up to 100 W of output power. The series delivers very high output current at low voltages, and excellent useable power for today's high performance applications. The series features an input voltage range of 18 Vdc to 36 Vdc and 36 Vdc to 75 Vdc and is available with output voltages of 1.2 V, 1.5 V 1.8 V, 2.5 V, 3.3 V and 5.0 V. The output voltage is adjustable from 80% to 110% of the nominal value. The series also has a remote ON/OFF capability. Overcurrent, overvoltage and overtemperature protection features are included as standard. Full international safety approval including EN60950-1 VDE and UL/cUL60950, reduces compliance costs and time to market. All 2 YEAR WARRANTY SPECIFICATIONS are typical at nominal input, full load at 25 C ambient unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Volta ge a djus ta bility 8 0 % to 1 1 0 % M inimum loa d Overshoot 0% At turn-on and turn-o None U nd e r s ho o t N o ne Transient response (S e e N ote 1 ) 60 mV to 150 mV typ. deviation 2 0 s re c ove ry 24 V nominal 48 V nominal Input c urre nt N o loa d Remote OFF Active high remote ON/OFF Logic compatibility ON OFF Undervoltage Lockout 24 Vin 48 Vin 48 Vin Start-up time (See Note 2) 18-36 Vdc 36-75 Vdc 5 0 mA 5 mA Open collector ref to -input O pe n c irc uit or >2 . 4 V dc <0 . 4 V d c Power up Power down Power up Power down Power up Remote ON/OFF 17.5 V (typ.) 16.5 V (typ.) 35.5 V (typ.) 33.5 V (typ.) 15 ms (typ.) 15 ms (typ.) EN61000-4-2 8 kV/6 kV(O/P within spec.) EN61000-4-3 10 V/m (O/P within spec.) EN61000-4-6 10 V (O/P within spec.) 100 V, 100 ms GENERAL SPECIFICATIONS Basic insulation S witc hing fre que nc y INPUT SPECIFICATIONS Input voltage range Immunity: ESD air enclosure Radiated enclosure Conducted Input transients Approvals and s ta nda rds Input/output F ix e d 480 kH z (See Note 3) M a te ria l fla mma bility EN60950-1 VDE U L /c U L 6 0 9 5 0 U L 9 4 V- 0 We ight MTBF 2250 Vdc 2 1 g (0 . 7 3 oz ) Telcordia Tech SR-332 4,034,120 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient. temperature Non-operating -40 C to +85 C -55 C to +125 C PROTECTION S hortc irc uit O ve rvolta ge T he r m a l C ontinuous N on- la tc hing 1 2 5 C hot s pot te mpe ra ture with automatic recovery International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. 60950-00 : UL 60950 File No. E135734/60950 No. 40005017. File No. 10401-3336-0197 VDE CB Report and to IEC60950, No. DE1-31103 File Name: eighth_brick.pdf Rev (07): 16 Nov 2005 Eighth-Brick Series Single output DC/DC CONVERTERS High Current, High Efficiency, Low Profile 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product OUTPUT VOLTAGE INPUT CURRENT (MAX.) (4) INPUT RIPPLE CURRENT (5) OUTPUT CURRENT (MAX.) REGULATION 1.2 V 0.98 A 100 mA 25 A 88% 1.5 V 1.21 A 100 mA 25 A 89.5% 1.8 V 1.43 A 100 mA 25 A 90.5% 1.5% 0.1% 0.2% 60 mV LES25A48-1V8J 2.5 V 1.62 A 150 mA 20 A 90% 1.5% 0.1% 0.2% 60 mV LES20A48-2V5J 3.3 V 2.11 A 150 mA 20 A 91% 1.5% 0.1% 0.2% 60 mV LES20A48-3V3J 5.0 V 1.59 A 100 mA 10 A 92% 1.5% 0.1% 0.2% 60 mV LES10A48-5V0J 1.2 V 1.98 A 150 mA 50 A 86% 1.5% 0.1% 0.2% 60 mV LES50A48-1V2J 1.5 V 1.91 A 150 mA 40 A 88.5% 1.5% 0.1% 0.2% 60 mV LES40A48-1V5J 1.8 V 2.30 A 150 mA 40 A 90% 1.5% 0.1% 0.2% 60 mV LES40A48-1V8J 2.5 V 1.99 A 200 mA 25 A 89.5% 1.5% 0.1% 0.2% 60 mV LES25A48-2V5J 3.3 V 2.65 A 200 mA 25 A 90.5% 1.5% 0.1% 0.2% 60 mV LES25A48-3V3J 5.0 V 2.30 A 150 mA 15 A 91.5% 1.5% 0.1% 0.2% 60 mV LES15A48-5V0J 2.5 V 3.20 A 150 mA 40 A 91% 1.5% 0.1% 0.2% 60 mV LES40A48-2V5J 3.3 V 3.20 A 150 mA 30 A 90.5% 1.5% 0.1% 0.2% 60 mV LES30A48-3V3J 5.0 V 3.20 A 150 mA 20 A 92% 1.5% 0.1% 0.2% 60 mV LES20A48-5V0J EFFICIENCY (TYP.) MODEL NUMBER (7,8) LINE LOAD RIPPLE & NOISE (pk - pk) 1.5% 0.1% 0.2% 60 mV LES25A48-1V2J 1.5% 0.1% 0.2% 60 mV LES25A48-1V5J SET POINT ACCURACY (MAX.) 48 Vin VALUE MODELS 48 Vin PERFORMANCE MODELS 48 Vin ULTRA MODELS 24 Vin MODELS 1.8 V 2.40 A 50 mA 20 A 91% 1.5% 0.1% 0.2% 35 mV LES20A24-1V8J 3.3 V 4.25 A 170 mA 20 A 90% 1.5% 0.1% 0.2% 60 mV LES20A24-3V3J Part Number System with Options LES50A48-1V2RANJ RoHS Compliance (7) J = Pb-free (RoHS 6/6 compliant) L = Low Profile E = 1/8 Brick Pin Length Options Blank = 0.188" (4.78 mm) N = 0.145" (3.68 mm) K = 0.110" (2.79 mm) Number of outputs S = Single Body Height, Package Type and Pin Length A = 0.300" (7.62 mm), Through Hole, 0.188" (4.78 mm) Pins E = 0.340" (8.64 mm), Through Hole, 0.188" (4.78 mm) Pins S = Surface Mount Rated Output Current 10 A = 10 Amps, 15 A = 15 Amps etc. Nominal Rated Input Voltage 24 = 24 Volts (18 Vdc to 36 Vdc range) 48 = 48 Volts (36 Vdc to 75 Vdc range) Remote ON/OFF Logic Blank = Positive R = Negative Output Voltage 1V2 = 1.2 Volts, 1V5 = 1.5 Volts etc. Notes 1 2 3 4 5 di/dt = 1 A/s, Vin = 24 or 48 Vdc, Tc = 25 C, load change = 50% to 75% lo max. and 75% to 50% lo max. Deviation varies by model. For further details see long form data sheets. Start-up into resistive load. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. Recommended input fusing is up to 10 A HRC 200 V rated fuse. Peak to peak measured with no external Pi filter. Significant reduction possible with external filter. See Application Note 138 for further details. 6 7 8 Active low Remote ON/OFF is available. Standard product is Active High. When ordering active low parts, designate with the Suffix `R' e.g. LES50A48-1V2RAJ. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. File Name: eighth_brick.pdf Rev (07): 16 Nov 2005 Eighth-Brick Series Single output DC/DC CONVERTERS High Current, High Efficiency, Low Profile 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm 2.30 (58.4) DIMENSION OPTIONS o0.040 0.002 (o1.02 0.05) (6 pls) 2.000 (50.80) OPTION 0.145 0.020 (3.68 0.51) 1 0.300 (7.62) 0.90 (22.9) TOP VIEW 0.300 (7.62) 2 3 0.45 (11.4) 8 7 6 5 4 0.150 (3.81) 0.150 (3.81) o 0.062 0.002 (o1.57 0.05) (2 pls) NEW Product CLEARANCE HEIGHT 0.016 (0.41) +0.022 (0.56) -0.030 (0.76) A 0.030 (0.76) 0.300 (7.62) E 0.070 (1.78) 0.340 (8.64) HEIGHT See Option Table 0.188 (4.78) CLEARANCE See Option Table 2.30 (58.4) 0.145 0.020 (3.68 0.51) 0.90 (22.9) 8 7 6 5 4 1 0.300 (7.62) 2 0.300 (7.62) 3 0.45 (11.4) PIN CONNECTIONS o0.058 0.008 (o1.47 0.02) (6 pls) Ref IPC-2222 Level B 2.000 (50.80) 0.150 (3.81) o 0.080 0.008 (o2.03 0.02) (2 pls) Ref IPC-2222 Level B 0.150 (3.81) Dimensions in Inches (mm) Tolerances (unless otherwise specified) x.xx 0.02 (x.x 0.5) x.xxx 0.010 (x.xx 0.25) RECOMMENDED HOLE PATTERN PIN NUMBER FUNCTION PIN NUMBER FUNCTION 1 +Vin 5 -Sense 2 ON/OFF 6 Trim 3 -Vin 7 +Sense 4 -Vout 8 +Vout Through-hole Mechanical Drawing, Dimension Options and Pinout Table 2.30 (58.4) 0.055 (1.40) x 0.105 (2.67) (7 pls) 2.186 (55.52) 0.0570.020 (1.450.51) 0.150 (3.81) 0.90 (22.9) 1 0.300 (7.62) TOP VIEW 0.300 (7.62) 2 3 8 7 6 5 4 0.4500.020 (11.430.51) 0.150 (3.81) PIN CONNECTIONS HEIGHT 0.28 (7.1) CLEARANCE 0.015 (0.38) o0.0800.008 (o2.030.02) (2 pls) Ref IPC-2222 Level B 2.30 (58.4) 2.186 (55.52) 0.0570.020 (1.450.51) o0.0580.008 (o1.470.02) (6 PLS) Ref IPC-2222 Level B 0.90 (22.9) 1 0.300 (7.62) TOP VIEW 0.300 (7.62) 0.4500.020 (11.430.51) 2 3 0.1450.020 (3.680.51) 2.000 (50.80) 0.067(1.70) x 0.118(3.00) (8 pls) PIN NUMBER FUNCTION PIN NUMBER FUNCTION 1 +Vin 5 -Sense 2 ON/OFF 6 Trim 3 -Vin 7 +Sense 4 -Vout 8 +Vout 0.150 (3.81) 8 7 6 5 4 Lead coplanarity within 0.006 [0.15] MAX 0.150 (3.81) Dimensions in Inches (mm) Tolerances (unless otherwise specified) x.xx 0.02 (x.x 0.5) x.xxx 0.010 (x.xx 0.25) Surface-mount Mechanical Drawing and Pinout Table Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Data Sheets www.artesyn.com File Name: eighth_brick.pdf Rev (07): 16 Nov 2005