357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: nelsales@nelfc.com www.nelfc.com
CMOS
HS-1450 Series
Description
The HS-1450 Series of quartz crystal oscillators provide enable/disable 3-state CMOS compatible signals
for bus connected systems. Supplying Pin 1 of the HS-1450 units with a logic “1" or open enables its pin 8
output. In the disabled mode, pin 8 presents a high impedance to the load. All units are designed to
survive wave soldering operations without damage.
Features
• Wide frequency range– 4.0MHz to 40.0MHz
• User specified tolerance available
• Will withstand vapor phase temperatures of 253°C
for 4 minutes maximum
• Space-saving alternative to discrete component
oscillators
• High shock resistance, to 3000g
• All metal, resistance weld, hermetically sealed
package
• Low Jitter
• High Q Crystal actively tuned oscillator circuit
• Power supply decoupling internal
• No internal PLL avoids cascading PLL problems
• Low power consumption
• Gold plated leads - Solder dipped leads available
upon request
• TTL compatible (HCT) at specified supply voltage
Electrical Connection
Pin Connection
1 Enable Input
7 Grd & Case
8 Output
14 VDD
Dimensions are in inches and (MM)
CRYSTAL CLOCK OSCILLATORS Data Sheet 0012T
Rev. D
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: nelsales@nelfc.com www.nelfc.com
HS-1450 Series Continued
CMOS
Operating Conditions and Output Characteristics
Electrical Characteristics
Parameter Symbol Conditions Min Typical Max
Frequency ----- ----- 4.0MHz ----- 40.0MHz
Duty Cycle ----- @ VDD /2 45/55% ----- 55/45%
Logic 0 VOL @ 600µA ----- ----- 0.2V
Logic 1 VOH @ 600µA VDD-0.2V ----- -----
Rise & Fall Time tr,tf 10-90% ----- ----- 3 ns
Tpz ----- ----- ----- ----- 25 ns
Jitter, RMS(2) ----- ----- ----- ----- 8 psec
Frequency Stability (1) dF/F Overall conditions including: -100ppm ----- +100ppm
voltage, calibration, temp.,
10 yr aging, shock, vibration
General Characteristics
Parameter Symbol Conditions Min Typical Max
Supply Voltage VDD ----- 4.75V 5.0V 5.25V
Supply Current IDD No Load 0.0 mA ----- 30mA
Output current IO ----- 0.0 mA ----- ±16.0 mA
Operating temperature TA ----- 0°C ----- 70°C
Storage temperature TS ----- -55°C ----- 125°C
Power Dissipation PD----- ----- ----- 158 mW
Lead temperature TL Soldering, 10 sec. ----- ----- 300°C
Load ---- ----- ----- ----- 15pf
Start-up time tS----- ----- 2 ms 10 ms
Environmental and Mechanical Characteristics
Mechanical Shock Per MIL-STD-202, Method 213, Condition E
Thermal Shock Per MIL-STD-833, Method 1011, Condition A
Vibration 0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz
Soldering Condition 300°C for 10 seconds
Hermetic Seal Leak rate less than 1 x 10 -8 atm.cc/sec of helium
Footnotes:
1) Standard frequency stability (±20,±25,±50ppm & others available)
2) Jitter performance is frequency dependent. Please contact factory for full characterization.
Test Load:
Rev. D
CRYSTAL CLOCK OSCILLATORS
HS - A145X - FREQ
Package Code Tolerance/Performance
HS Leaded 4 pin (14 pin) 0 ±100ppm 0-70°C
SM Leaded 4 pin (14 pin) SMD 1 ±50ppm 0-70°C
Gull Wing 7 ±25ppm 0-70°C
Input Voltage 9 Customer Specific
Code Specification A ±20ppm 0-70°C
A 3.3V B ±50ppm -40 to +85°C
5V C ±100ppm -40 to +85°C
Creating a Part Number
Data Sheet 0012T
