ILD610-2-X007 - Vishay Intertechnology, Inc.

Document Number: 83651 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com

Rev. 1.8, 09-Jan-08 1

Optocoupler, Phototransistor Output, Dual Channel

ILD610

Vishay Semiconductors

DESCRIPTION

The ILD610 series is a dual channel optocoupler series for

high density applications. Each channel consists of an

optically coupled pair with a gallium arsenide infrared LED

and silicon NPN phototransistor. Signal information,

including a DC level, can be transmitted by the device while

maintaining a high degree of electrical isolation between

input and output. The ILD610 series is the dual version of

SFH610 series and uses a repetitive pin-out configuration

instead of the more common alternating pin-out used in most

dual couplers.

FEATURES

• Dual version of SFH610 series

• Isolation test voltage, 5300 VRMS

•V

CEsat 0.25 (≤ 0.4) V at IF = 10 mA, IC = 2.5 mA

•V

CEO = 70 V

• Lead (Pb)-free component

• Component in accordance to RoHS

2002/95/EC and WEEE 2002/96/EC

AGENCY APPROVALS

• UL1577, file no. E52744 system code H or J, double

protection

• DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending

available with option 1

• CSA 93751

• BSI IEC 60950 IEC 60065

Note

For additional information on the available options refer to option information.

i179045

ORDER INFORMATION

PART REMARKS

ILD610-1 CTR 40 to 80 %, DIP-8

ILD610-2 CTR 63 to 125 %, DIP-8

ILD610-3 CTR 100 to 200 %, DIP-8

ILD610-4 CTR 160 to 320 %, DIP-8

ILD610-2X007 CTR 63 to 125 %, SMD-8 (option 7)

ILD610-3X006 CTR 100 to 200 %, DIP-8 400 mil (option 6)

ILD610-3X009 CTR 100 to 200 %, SMD-8 (option 9)

ILD610-4X009 CTR 160 to 320 %, SMD-8 (option 9)

ABSOLUTE MAXIMUM RATINGS

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

INPUT

Reverse voltage VR6.0 V

Surge forward current t ≤ 1.0 ms IFSM 1.5 A

Power dissipation Pdiss 100 mW

Derate linearly from 25 °C 1.3 mW/°C

Forward continuous current IF60 mA

OUTPUT

Collector emitter voltage VCE 70 V

Collector current IC50 mA

t ≤ 1.0 ms IC100 mA

Power dissipation Pdiss 150 mW

Derate linearly from 25 °C 2.0 mW/°C

www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83651

2Rev. 1.8, 09-Jan-08

ILD610

Vishay Semiconductors Optocoupler, Phototransistor

Output, Dual Channel

Note

Tamb = 25 °C, unless otherwise specified.

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied

at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for

extended periods of the time can adversely affect reliability.

Note

Tamb = 25 °C, unless otherwise specified.

Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering

evaluation. Typical values are for information only and are not part of the testing requirements.

Note

(1) CTR will match within a ratio of 1.7:1

COUPLER

Isolation test voltage t = 1.0 s VISO 5300 VRMS

Isolation resistance VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 Ω

VIO = 500 V, Tamb = 100 °C RIO ≥ 1011 Ω

Storage temperature Tstg - 55 to + 150 °C

Operating temperature Tamb - 55 to + 100 °C

Junction temperature Tj100 °C

Lead soldering time at 260 °C 10 s

ABSOLUTE MAXIMUM RATINGS

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

ELECTRICAL CHARACTERISTICS

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

INPUT

Forward voltage IF = 60 mA VF1.25 1.65 V

Reverse current VR = 6.0 V IR0.01 10 µA

Capacitance VR = 0 V, f = 1.0 MHz CO25 pF

OUTPUT

Collector emitter breakdown

voltage IC = 10 mA, IE = 10 µA BVCEO 70 90 V

BVCEO 6.0 7.0 V

Collector emitter dark current VCE = 10 V ICEO 2.0 50 nA

Collector emitter capacitance VCE = 5.0 V, f = 1.0 MHz CCE 7.0 pF

Collector emitter leakage current VCE = 10 V

ILD610-1 ICEO 2.0 50 nA

ILD610-2 ICEO 2.0 50 nA

ILD610-3 ICEO 5.0 100 nA

ILD610-4 ICEO 5.0 100 nA

COUPLER

Collector emitter saturation

voltage IF = 10 mA, IC = 2.5 mA VCEsat 0.25 0.40 V

Coupling capacitance CC0.35 pF

CURRENT TRANSFER RATIO

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

CTR (1)

IF = 10 mA, VCE = 5.0 V

ILD610-1 CTR 40 80 %

ILD610-2 CTR 63 125 %

ILD610-3 CTR 100 200 %

ILD610-4 CTR 160 320 %

IF = 1.0 mA, VCE = 5.0 V

ILD610-1 CTR 13 %

ILD610-2 CTR 22 %

ILD610-3 CTR 34 %

ILD610-4 CTR 56 %

Document Number: 83651 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com

Rev. 1.8, 09-Jan-08 3

ILD610

Optocoupler, Phototransistor

Output, Dual Channel Vishay Semiconductors

SWITCHING CHARACTERISTICS

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

NON-SATURATED

Rise time VCC = 5.0 V, RL = 75 Ω,

IF = 10 mA

ILD610-1

2.0

µs

ILD610-2 2.5

ILD610-3 2.9

ILD610-4 3.3

Fall time VCC = 5.0 V, RL = 75 Ω,

IF = 10 mA

ILD610-1

2.0

µs

ILD610-2 2.6

ILD610-3 3.1

ILD610-4 3.5

Turn-on time VCC = 5.0 V, RL = 75 Ω,

IF = 10 mA

ILD610-1

ton

3.0

µs

ILD610-2 3.2

ILD610-3 3.6

ILD610-4 2.3

Turn-off time VCC = 5.0 V, RL = 75 Ω,

IF = 10 mA

ILD610-1

toff

2.9

µs

ILD610-2 3.4

ILD610-3 3.7

ILD610-4 4.1

SATURATED

Rise time VCC = 5.0 V, RL = 1.0 kΩ,

IF = 5.0 mA

ILD610-1

2.0

µs

ILD610-2 2.8

ILD610-3 3.3

ILD610-4 4.6

Fall time VCC = 5.0 V, RL = 1.0 kΩ,

IF = 5.0 mA

ILD610-1

µs

ILD610-2 2.6

ILD610-3 3.1

ILD610-4 15

Turn-on time VCC = 5.0 V, RL = 1.0 kΩ,

IF = 5.0 mA

ILD610-1

ton

3.0

µs

ILD610-2 4.3

ILD610-3 4.6

ILD610-4 6.0

Turn-off time VCC = 5.0 V, RL = 1.0 kΩ,

IF = 5.0 mA

ILD610-1

toff

µs

ILD610-2 2.9

ILD610-3 3.4

ILD610-4 25

www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83651

4Rev. 1.8, 09-Jan-08

ILD610

Vishay Semiconductors Optocoupler, Phototransistor

Output, Dual Channel

TYPICAL CHARACTERISTICS

Tamb = 25 °C, unless otherwise specified

Fig. 1 - Forward Voltage vs. Forward Current

Fig. 2 - Normalized Non-Saturated and Saturated CTR vs.

LED Current

Fig. 3 - Normalized Non-Saturated and Saturated CTR vs.

LED Current

Fig. 4 - Normalized Non-Saturated and Saturated CTR vs.

LED Current

Fig. 5 - Normalized Non-Saturated and Saturated CTR vs.

LED Current

Fig. 6 - Collector Emitter Current vs. Temperature and LED Current

iilct6_01

IF - Forward Current (mA)

1001010.1

0.7

0.8

0.9

1.0

1.1

1.2

1.3

1.4

VF - Forward Voltage (V)

amb

= - 55 °C

amb

= 25 °C

amb

= 85 °C

iilct6_02

1001010.1

0.0

0.5

1.0

1.5

NCTR(SAT)

NCTR

IF- LED Current (mA)

NCTR - Normalized CTR

Normalized to:

VCE = 10 V,I

F= 10 mA

Tamb= 25 °C

CTRCE(sat) VCE = 0.4 V

iilct6_03

1001010.1

0.0

0.5

1.0

1.5

NCTR(SAT)

NCTR

- LED Current (mA)

NCTR - Normalized CTR

Normalized to:

= 10 V,I

= 10 mA, T

= 25 °C

= 50 °C

CTRce(sat)V

= 0.4 V

iilct6_04

1001010.1

0.0

0.5

1.0

1.5

IF- LED Current (mA)

NCTR(SAT)

NCTR

Normalized to:

VCE = 10 V,I

F= 10 mA

amb= 25 °C

CTRCE(sat) VCE = 0.4 V

amb= 70 °C

NCTR - Normalized CTR

iilct6_05

0.1 1 10 100

1.5

1.0

0.5

0.0

- LED Current (mA)

NCTR - Normalized CTR

NCTR(SAT)

NCTR

Normalized to:

= 10 V,I

= 10 mA, T

amb

= 25 °C

CTR

CE(sat)

= 0.4 V

amb

= 85 °C

iilct6_06

60503020100

50 °C

70 °C

85 °C

IF- LED Current (mA)

ICE - Collector Current (mA)

25 °C

Document Number: 83651 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com

Rev. 1.8, 09-Jan-08 5

ILD610

Optocoupler, Phototransistor

Output, Dual Channel Vishay Semiconductors

Fig. 7 - Collector Emitter Leakage Current vs.Temperature

Fig. 8 - Propagation Delay vs. Collector Load Resistor

Fig. 9 - Switching Timing

Fig. 10 - Non-Saturated Switching Schematic

Fig. 11 - Saturated Switching Time Test Waveform

iilct6_07

100806040200- 20

- 2

- 1

Tamb- Ambient Temperature (°C)

ICEO - Collector Emitter (nA)

Vce = 10 V

Typical

iilct6_08

- Collector Load Resistor (kΩ)

1001010.1

100

1000

1.0

1.5

2.0

2.5

pLH

pHL

pLH

- Propagation (µs)

pHL

- Propagation Delay (µs)

amb

= 25 °C, I

= 10 mA

= 5 V, V

= 1.5 V

iild610_09

tStF

tPHL

tPLH

VTH = 1.5 V

iild610_10

= 5 V

F = 10 kHz,

DF = 50 %

= 10 mA

off

10 %

50 %

90 %

tpdoff

tpdon

ton

Output

Input

10 %

50 %

90 %

iild610_11

www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83651

6Rev. 1.8, 09-Jan-08

ILD610

Vishay Semiconductors Optocoupler, Phototransistor

Output, Dual Channel

PACKAGE DIMENSIONS in inches (millimeters)

i178006

Pin one ID

0.255 (6.48)

0.268(6.81)

0.379 (9.63)

0.390 (9.91)

0.030 (0.76)

0.045 (1.14)

4° typ.

0.100 (2.54) typ.

10°

3° to 9°

0.300 (7.62)

typ.

0.018(0.46)

0.022 (0.56) 0.008(0.20)

0.012 (0.30)

0.110 (2.79)

0.130 (3.30)

0.150 (3.81)

0.020 (0.51)

0.035 (0.89)

0.230 (5.84)

0.250 (6.35)

4321

0.031 (0.79)

0.050 (1.27)

567 8ISO method A

min.

0.315 (8.00)

0.020 (0.51 )

0.040 (1.02 )

0.300 (7.62)

ref.

0.375 (9.53)

0.395 (10.03 )

0.012 (0.30 ) typ.

0.0040 (0.102)

0.0098(0.249)

15° max.

Option 9

0.014 (0.35)

0.010 (0.25)

0.400 (10.16)

0.430 (10.92)

0.307 (7.8)

0.291 (7.4)

0.407 (10.36)

0.391 (9.96)

Option 6

0.315 (8.0)

min.

0.300 (7.62)

typ.

0.180 (4.6)

0.160 (4.1)

0.331 (8.4)

min.

0.406 (10.3)

max.

0.028(0.7)

min.

Option 7

18450

Document Number: 83651 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com

Rev. 1.8, 09-Jan-08 7

ILD610

Optocoupler, Phototransistor

Output, Dual Channel Vishay Semiconductors

OZONE DEPLETING SUBSTANCES POLICY STATEMENT

It is the policy of Vishay Semiconductor GmbH to

1. Meet all present and future national and international statutory requirements.

2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with

respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.

It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone

depleting substances (ODSs).

The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use

within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances.

Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in

the following documents.

1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively.

2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency

(EPA) in the USA.

3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.

Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do

not contain such substances.

We reserve the right to make changes to improve technical design

and may do so without further notice.

Parameters can vary in different applications. All operating parameters must be validated for each customer application by the

customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall

indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any

claim of personal damage, injury or death associated with such unintended or unauthorized use.

Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany

Document Number: 91000 www.vishay.com

Revision: 18-Jul-08 1

Disclaimer

Legal Disclaimer Notice

Vishay

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.