SmartFusion2 SoC FPGA Advanced Development Kit Quickstart Card Kit Contents - M2S150-ADV-DEV-KIT-ES Quantity Description 1 SmartFusion2 SoC FPGA 150K LE M2S150T-1FCG1152ES 1 USB A male to micro-B male cable, three feet long 28/28AWG USB 2.0 1 USB A to mini-B cable 1 12 V, 5 A AC power adapter 1 Quickstart guide 1 Libero SoC Platinum software one year license Note: The M2S150-ADV-DEV-KIT-ES is a RoHS compliant. Overview Microsemi's SmartFusion(R)2 SoC FPGA Advanced Development Kit offers a full featured 150K LE device SmartFusion2 system-on-chip (SoC) FPGA. This 150K LE device inherently integrates reliable flash-based FPGA fabric, a 166 MHz CortexTM-M3 processor digital signal processing (DSP) blocks, static random-access memory (SRAM), embedded nonvolatile memory (eNVM), and industry-required high-performance communication interfaces-- all on a single chip. The Advanced Development Kit board has numerous standard and advanced peripherals such as: PCIe(R)x4 edge connector, two FMC connectors for using many off the shelf daughter cards, USB, Philips inter-integrated circuit (I2C), two gigabit Ethernet ports, serial peripheral interface (SPI), and UART. A high precision operational amplifier circuitry on the board helps to measure core power consumption by the device. The SmartFusion2 SoC FPGA memory management system is supported by 1 GByte (GB) of on-board double data rate3 (DDR3) memory and 2 GBytes (GB) SPI flash--1GB connected to the Microcontroller Subsystem (MSS) and 1GB connected to the FPGA fabric. The serializer and deserializer (SERDES) blocks can be accessed through the peripheral component interconnect express (PCIe) edge connector or high speed sub-miniature push-on (SMA) connectors or through on-board FPGA mezzanine card (FMC) connector. This kit enables you to design applications that involve one or more of the following: * * * * * * * * * Microprocessor applications Embedded ARM(R) CortexTM-M3 processor-based systems Motor control Industrial automation Power measurement Security applications FMC expansion High speed I/O applications Universal serial bus (USB) applications (OTG support) Hardware Feature Overview * * * * * * * SmartFusion2 SoC FPGA in the FCG1152 package (M2S150T-1FCG1152ES, 150K LE) DDR3 synchronous dynamic random access memory (SDRAM) - 4x256 MB for storing data. - 256 MB for storing the ECC bits SPI flash memory - 1 GB SPI flash connected to SPI port 0 of the SmartFusion2 SoC FPGA MSS. - 1 GB SPI flash connected to SmartFusion2 SoC FPGA fabric PCI Express Gen 2 x1 interface One pair SMA connectors for testing of the full-duplex SERDES channel Two FMC connectors with HPC/LPC pinout for expansion PCIe x4 edge connector August 2014 (c) 2014 Microsemi Corporation 1 SmartFusion2 SoC FPGA Advanced Development Kit Quickstart Card * * * * * * * * * * * * RJ45 interface for 10/100/1000 Ethernet USB micro-AB connector Headers for I2C, SPI, GPIOs FTDI programmer interface to program the external SPI flash JTAG/SPI programming interface RVI header for application programming and debug Flashpro programming header Embedded trace macro (ETM) cell header for debug QUAD 2:1 MUX/DEMUX high bandwidth bus switch Dual in-line package (DIP) switches for user application Push-button switches and LEDs for demo purposes Current measurement test points Development Board Callout Embedded FlashPro5 Programming Procedures - REQUIRED FOR PROGRAMMING WITHOUT A STANDALONE FLASHPRO PROGRAMMER: http://www.microsemi.com/document-portal/doc_download/134263-embedded-flashpro5-programmingprocedures 2 Development Board Block Diagram Development Board Block Diagram 3 Software and Licensing The SmartFusion2 SoC FPGA Advanced Development Kit is supported by the Libero(R) System-on-Chip (SoC) v11.4 or later, which includes a web install option. SoftConsole Software IDE and FlashPro are enabled by default in the web install; these software tools can be used for software design and debug. Refer to the SmartFusion2 SoC FPGA Advanced Development Kit User's Guide for more information. The M2S150-ADV-DEV-KIT-ES requires a valid Platinum Libero SoC software license. Upon receiving this kit, email your: 1. Full name 2. Address 3. Access code: (available with kit) 4. Sales or Purchase Order Number to Microsemi at: M2S150AdvDevKit.License@microsemi.com to receive your free 1-year Platinum license. Documentation Resources For further kit information, including user's guide, tutorial, and full design examples, refer to the SmartFusion2 SoC FPGA Advanced Development Kit page. New Demos and Tutorials will be posted as they become available. Microsemi recommends that you sign up for Product Updates to be notified when new material is available. You can sign up for product updates from your Microsemi Customer Portal account. Technical Support and Contacts Technical support is available online and by email.To find your local representative visit Microsemi SoC Sales offices, including Representatives and Distributors, which are located worldwide. Microsemi Corporate Headquarters One Enterprise, Aliso Viejo CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Sales: +1 (949) 380-6136 Fax: +1 (949) 215-4996 E-mail: sales.support@microsemi.com Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense and security, aerospace, and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs, and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif. and has approximately 3,400 employees globally. Learn more at www.microsemi.com. (c) 2014 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. 50200555-2/08.14