August 2014 1
© 2014 Microsemi Corporation
SmartFusion2 SoC FPGA Advanced Development
Kit Quickst art Card
Kit Contents – M2S150-ADV-DEV-KIT-ES
Overview
Microsemi’s SmartFusion®2 SoC FPGA Advanced Development Kit offers a full featured 150K LE device
SmartFusion2 system-on-chip (SoC) FPGA. This 150K LE device inherently integrates reliable flash-based FPGA
fabric, a 166 MHz Cortex™-M3 processor digital signal processing (DSP) blocks, static random-access memory
(SRAM), embedded nonvolatile memory (eNVM), and industry-required high-performance communication interfaces—
all on a sing l e ch ip.
The Advanced Development Kit board has numerous standard and advanced peripherals such as: PCIe®x4 edge
connector, two FMC connectors for using many off the shel f daugh te r cards, USB, Phil ips inter-integrated circuit (I2C),
two gigabit Ethern et ports, serial pe ripheral interface (SPI), and UART. A high precision operational amplifier circuitry
on the board helps to measure core power consumption by the device.
The SmartFusion2 SoC FPGA memory management system is supported by 1 GByte (GB) of on-board double data
rate3 (DDR3) memory and 2 GBytes (GB) SPI flash—1GB connected to the Microcontroller Subsystem (MSS) and
1GB connected to the FPGA fabric. The serializer and deserializer (SERDES) blocks can be accessed through the
peripheral component interconnect express (PCIe) edge connector or high speed sub-miniature push-on (SMA)
connectors or through on-board FPGA mezzanine card (FMC) connector.
This kit enables you to design applications that involve one or more of the following :
• Microprocessor applications
• Embedded ARM® Cortex™-M3 processor-based systems
• Motor control
• Industrial automation
• Power measurement
• Security applications
• FMC expansion
• High speed I/O applications
• Universal serial bus (USB) applications (OTG support)
Hardware Feature Overview
• SmartFusion2 SoC FPGA in the FCG1152 package (M2S150T-1FCG1152ES, 150K LE)
• DDR3 synchronous dynamic random access memory (SDRAM)
– 4x256 MB for storing data.
– 256 MB for storing the ECC bits
• SPI flash memory
– 1 GB SPI flash connected to SPI port 0 of the SmartFusion2 SoC FPGA MSS.
– 1 GB SPI flash connected to SmartFusion2 SoC FPGA fabric
• PCI Express Gen 2 x1 interface
• One pair SMA connectors for testing of the full-duplex SERDES channel
• Two FMC connectors with HPC/LPC pinout for expansion
• PCIe x4 edge connector
Quantity Description
1 SmartFusion2 SoC FPGA 150K LE M2S150T-1FCG1152ES
1 USB A male to micro-B male cable, three feet long 28/28AWG USB 2.0
1 USB A to mini-B cable
1 12 V, 5 A AC power adapter
1 Quickstart guide
1 Libero SoC Platinum software one year license
Note: The M2S150-ADV-D EV -KIT-ES is a Ro HS compl iant.