FEATURES
DControlled Baseline
− One Assembly/Test Site, One Fabrication
Site
DExtended Temperature Performance of Up to
−55°C to +125°C
DEnhanced Diminishing Manufacturing
Sources (DMS) Support
DEnhanced Product-Change Notification
DQualification Pedigree(1)
DSingle Voltage Detector (TPS3803):
Adjustable/1.5 V
DDual Voltage Detector (TPS3805):
Adjustable/3.3 V
DHigh ±1.5% Threshold Voltage Accuracy
DSupply Current: 3 µA Typical at VDD = 3.3 V
DPush/Pull Reset Output (TPS3805) Open-Drain
Reset Output (TPS3803)
D5-Pin SC−70 Package
(1) Component qualification in accordance with JEDEC and industry
standards to ensure reliable operation over an extended
temperature range. This includes, but is not limited to, Highly
Accelerated Stress Test (HAST) or biased 85/85, temperature
cycle, autoclave or unbiased HAST, electromigration, bond
intermetallic life, and mold compound life. Such qualification
testing should not be viewed as justifying use of this component
beyond specified performance and environmental limits.
APPLICATIONS
DApplications Using DSPs, Microcontrollers,
or Microprocessors
DWireless Communication Systems
DPortable/Battery-Powered Equipment
DProgrammable Controls
DIntelligent Instruments
DIndustrial Equipment
DNotebook/Desktop Computers
DAutomotive Systems
DESCRIPTION
The TPS3803 and TPS3805 families of supervisory circuits
provide circuit initialization and timing supervision, primarily
for DSPs and processor-based systems.
The TPS3803G15 device has a fixed-sense threshold voltage
VIT set by an internal voltage divider, whereas the
TPS3803−01 has an adjustable SENSE input that can be
configured by two external resistors. In addition to the fixed
sense threshold monitored at VDD, the TPS3805 devices
provide a second adjustable SENSE input. RESET is
asserted in case any of the two voltages drops below VIT.
During power on, RESET is asserted when supply voltage
VDD becomes higher than 0.8 V. Thereafter, the supervisory
circuit monitors VDD (and/or SENSE) and keeps RESET
active as long as VDD or SENSE remains below the threshold
voltage VIT. As soon as VDD (SENSE) rises above the
threshold voltage VIT, RESET is deasserted again. The
product spectrum is designed for 1.5 V, 3.3 V, and adjustable
supply voltages. The devices are available in a 5-pin SC-70
package.
3
2
4
5
DCK PACKAGE
(Top View)
1
NC
GND
RESET
(1) NC = No Connection on TPS3803G15
VDD
SENSE
NC(1)
TPS3803−01, TPS3803G15, TPS3805
Typical Operating Circuit
TPS3805H33 TMS320VC5416
RESETVDD
SENSE GND
DVDD CVDD
RESET
GND
3.3 V1.6 V
R1
R2
www.ti.com
TPS3803-01-EP
TPS3803G15-EP
TPS3805H33-EP
SGLS227C − DECEMBER 2003 − REVISED JUNE 2007
VOLTAGE
DETECTOR
         
          
 !     !   
www.ti.com
Copyright 2003−2007, Texas Instruments Incorporated
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
"#$%#&%'&(
"#$%#)'*&(
"#$%*+##&(
SGLS227C − DECEMBER 2003 − REVISED JUNE 2007
www.ti.com
2
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible
to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE INFORMATION
TA
DEVICE NAME
THRESHOLD VOLTAGE
MARKING
T
A
DEVICE NAME
VDD SENSE
MARKING
TPS3803−01QDCKREP(2) NA 1.226 V AWH
−40_C to +125_CTPS3803G15QDCKREP(2) 1.4 V NA AXT
−40 C to +125 C
TPS3805H33QDCKREP(2) 3.05 V 1.226 V AWY
TPS3803−01MDCKREP(2) NA 1.226 V BAY
−55_C to +125_CTPS3803G15MDCKREP(2) 1.40 V NA ARH
−55 C to +125 C
TPS3805H33MDCKREP(2) 3.05 V 1.226 V ARJ
(2) The DCKR passive indicates tape and reel containing 3000 parts.
ORDERING INFORMATION
TPS380 3 G 15 DCK R
Reel
Package
Nominal Supply Voltage
Nominal Threshold Voltage
Functionality
Family
Q
Temperature Designator
EP
Enhanced Plastic Designator
Function/Truth Tables
TPS3803-01 TPS3803G15
SENSE > VIT RESET VDD > VIT RESET
0 L 0 L
1 H 1 H
TPS3805H33
VDD > VIT SENSE > VIT RESET
0 0 L
01L
10L
1 1 H
"#$%#&%'&(
"#$%#)'*&(
"#$%*+##&(
SGLS227C − DECEMBER 2003 − REVISED JUNE 2007
www.ti.com
3
FUNCTIONAL BLOCK DIAGRAM
_
+
R1
R2
Reference
Voltage
of 1.215 V
TPS3803G15
RESET
VDD
GND
_
+
Reference
Voltage
of 1.226 V
TPS3803−01
RESET
VDD
GND
SENSE
Device
Supply Voltage
_
+
_
+
R1
R2
VDD
GND
Reference
Voltage
of 1.226 V
SENSE
RESET
TPS3805
"#$%#&%'&(
"#$%#)'*&(
"#$%*+##&(
SGLS227C − DECEMBER 2003 − REVISED JUNE 2007
www.ti.com
4
TIMING REQUIREMENTS
V
DD
or SENSE
VIT + Vhys
VIT
0.8 V
RESET
= Undefined
Terminal Functions
TERMINAL
I/O
DESCRIPTION
NAME NO.
I/O
DESCRIPTION
GND 2 I Ground
RESET 3 O Active-low reset output (TPS3803—open-drain, TPS3805—push/pull)
SENSE 5 I Adjustable sense input
NC 1 No internal connection
NC (TPS3803G15) 5No internal connection
VDD 4 I Input supply voltage, fixed sense input for TPS3803G15 and TPS3805
"#$%#&%'&(
"#$%#)'*&(
"#$%*+##&(
SGLS227C − DECEMBER 2003 − REVISED JUNE 2007
www.ti.com
5
ABSOLUTE MAXIMUM RATINGS(1)
Over operating free-air temperature, unless otherwise noted.
Supply voltage, VDD(2) +7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
All other pins(2) −0.3 V to +7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum low-output current, IOL +5 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum high-output current, IOH −5 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input clamp current, IIK (VI < 0 or VI > VDD)±10 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output clamp current, IOK (VO < 0 or VO > VDD)±10 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range, TA−55°C to +125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg,(3) −65°C to +150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is
not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to GND. For reliable operation the device should not be continuously operated at 7 V for more than
t = 1000 h.
(3) Long-term high-temperature storage and/or extended use at maximum recommended operating conditions may result in a reduction of overall
device life. See www.ti.com/ep_quality for additional information on enhanced plastic packaging.
DISSIPATION RATING TABLE
PACKAGE TA < +25°C
POWER RATING DERATING FACTOR
ABOVE TA = +25°CTA = +70°C
POWER RATING TA = +85°C
POWER RATING
DCK 321 mW 2.6 mW/°C206 mW 167 mW
RECOMMENDED OPERATING CONDITIONS MIN MAX UNIT
Supply voltage, VDD 1.3 6 V
Input voltage, VI0 VDD + 0.3 V
Operating free-air temperature range, TA
Q suffix devices −40 +125
°C
Operating free-air temperature range, T
AM suffix devices −55 +125 °
C
"#$%#&%'&(
"#$%#)'*&(
"#$%*+##&(
SGLS227C − DECEMBER 2003 − REVISED JUNE 2007
www.ti.com
6
ELECTRICAL CHARACTERISTICS
Over recommended operating free-air temperature range, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
VDD = 1.5 V, IOH = −0.5 mA
V
High-level output voltage (TPS3805 only) VDD = 3.3 V, IOH = −1 mA 0.8 x V
DD
V
High-level output voltage (TPS3805 only)
VDD = 6 V, IOH = −1.5 mA
0.8 x V DD
V
VDD = 1.5 V, IOL = 1 mA
V
Low-level output voltage VDD = 3.3 V, IOL = 2 mA 0.3 V
Low-level output voltage
VDD = 6 V, IOL = 3 mA
V
Power-up reset voltage(1)
VIT > 1.5 V, TA = +25°C 0.8 V
Power-up reset voltage
(1)
VIT ≤ 1.5 V, TA = +25°C 1 V
Negative-going input threshold
SENSE 1.2 1.226 1.244
V
Negative-going input threshold
voltage(2)
TPS3803G15 1.379 1.4 1.421 V
voltage(2)
TPS3805H33 3.004 3.05 3.096
V
Hysteresis
1.2 V < VIT < 2.5 V 15
mV
Vhys Hysteresis 2.5 V < VIT < 3.5 V 30 mV
IIInput current SENSE −25 25 nA
IOH High-level output current at RESET Open-drain only VDD = VIT + 0.2V, VOH = VDD 300 nA
TPS3803−01 2 4
Supply current
TPS3805,
TPS3803G15 VDD = 3.3 V, output unconnected 3 5
A
IDD Supply current TPS3803−01 2 4 µA
TPS3805,
TPS3803G15 VDD = 6 V, output unconnected 4 6
CIInput capacitance VI = 0 V to VDD 1 pF
(1) The lowest supply voltage at which RESET (VOL(max) = 0.2 V, IOL = 50 µA) becomes active. tr(VDD) ≥15 µs/V
(2) To ensure the best stability of the threshold voltage, place a bypass capacitor (ceramic, 0.1 µF) near the supply terminals.
TIMING REQUIREMENTS
AT RL = 1 MΩ, CL = 50 PF, over recommended operating free-air temperature range.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Pulse width
At VDD
VIH = 1.05 x VIT, VIL = 0.95 x VIT
5.5
s
twPulse width At SENSE VIH = 1.05 x VIT, VIL = 0.95 x VIT 5.5 µs
SWITCHING CHARACTERISTICS
AT RL = 1 MΩ, CL = 50 PF, over recommended operating free-air temperature range.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Propagation (delay) time,
VDD to RESET delay
V = 1.05 x V ,
tPHL
Propagation (delay) time,
high-to-low-level output SENSE to RESET delay VIH = 1.05 x VIT,
VIL = 0.95 x VIT
5 100
s
Propagation (delay) time,
VDD to RESET delay
IH IT
V
IL
= 0.95 x V
IT
µs
tPLH
Propagation (delay) time,
low-to-high-level output SENSE to RESET delay 5 100
"#$%#&%'&(
"#$%#)'*&(
"#$%*+##&(
SGLS227C − DECEMBER 2003 − REVISED JUNE 2007
www.ti.com
7
TYPICAL CHARACTERISTICS
Figure 1
3
2
1
00 0.5 1 1.5 2 2.5 3
4
5
TPS3805H33
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
6
3.5 4 4.5 5 5.5 6
DD
I Supply Current − −Aµ
VDD − Supply Voltage − V
SENSE = GND
RESET = Open
85°C
0°C
25°C
−40°C
Figure 2
1.5
1
0.5
00 0.5 1 1.5 2 2.5 3
2
2.5
TPS3803−01
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
3
3.5 4 4.5 5 5.5 6
DD
I Supply Current − −Aµ
VDD − Supply Voltage − V
SENSE = GND
RESET = Open
85°C
0°C
−40°C
25°C
Figure 3
1.00
0.80
0.60
0.40
012345
1.20
1.40
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
1.60
IOL − Low-Level Output Current − mA
OL
V − Low-Level Output Voltage − V
0.20
0
VDD = 1.5 V
V(SENSE) = Low
85°C
0°C
25°C
−40°C
Figure 4
0.35
0.30
0.25
0.20
0 0.5 1 1.5 2 2.5 3
0.40
0.45
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
0.50
0.15
0.10
0.05
0
OL
V − Low-Level Output Voltage − V
IOL − Low-Level Output Current − mA
85°C
0°C
25°C
−40°C
VDD = 1.5 V
V(SENSE) = Low
(Expanded View)
"#$%#&%'&(
"#$%#)'*&(
"#$%*+##&(
SGLS227C − DECEMBER 2003 − REVISED JUNE 2007
www.ti.com
8
TYPICAL CHARACTERISTICS
Figure 5
2
1.5
1
0.5
0 5 10 15 20 25 30
2.5
3
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
3.5
35 40 45 50
OL
V − Low-Level Output Voltage − V
IOL − Low-Level Output Current − mA
85°C
0°C
25°C
−40°C
VDD = 6 V
V(SENSE) = Low
0
Figure 6
0.7
0.6
0.5
0.4
02 4 6 81012
0.8
0.9
1
14 16 18 20
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
OL
V − Low-Level Output Voltage − V
IOL − Low-Level Output Current − mA
85°C
0°C
25°C
−40°C
VDD = 6 V
V(SENSE) = Low
0.3
0.2
0.1
0
(Expanded View)
Figure 7
2.75
2.25
2
1.75
−14 −12 −10 −8 −6 −4 −2
3
3.25
TPS3805H33
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
3.5
0
V
OH
− High-Level Output Voltage − V
IOH − High-Level Output Current − mA
1.5
2.5
0°C
25°C
−40°C
VDD = 3.3 V
V(SENSE) = High
85°C
Figure 8
3
2.9
2.8
2.7
−5 −4 −3 −2 −1 0
3.1
3.2
3.3
TPS3805H33
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
VOH− High-Level Output Voltage − V
IOH − High-Level Output Current − mA
2.6
2.5
0°C
25°C
−40°C
VDD = 3.3 V
V(SENSE) = High
85°C
(Expanded View)
"#$%#&%'&(
"#$%#)'*&(
"#$%*+##&(
SGLS227C − DECEMBER 2003 − REVISED JUNE 2007
www.ti.com
9
TYPICAL CHARACTERISTICS
Figure 9
5
4.5
4
3.5
−4 −3 −2 −1
5.5
6
TPS3805H33
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
V
OH
− High-Level Output Voltage − V
IOH − High-Level Output Current − mA
30
85°C
0°C
25°C
−40°C
VDD = 6 V
V(SENSE) = High
Figure 10
5.4
5.2
5
4.8
−14 −12 −10 −8 −6 −4
5.6
5.8
6
TPS3805H33
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
VOH− High-Level Output Voltage − V
IOH − High-Level Output Current − mA
4.6 −2 0
85°C
0°C
25°C
−40°C
VDD = 6 V
V(SENSE) = High
(Expanded View)
VIT − Normalized Input Threshold Voltage VIT(TA) / VIT(25°C)
Figure 11
1.0005
1.0000
0.9995
0.9990
−40 −20 0 20 40 60 80
1.0010
1.0015
TPS3803−01
NORMALIZED INPUT THRESHOLD VOLTAGE
vs
FREE-AIR TEMPERATURE AT SENSE
1.0020
TA − Free-Air Temperature at SENSE − °C
0.9985
0.9980
VDD = 6 V
RESET = 100 kΩ to VDD
Figure 12
7
6
5
4
0 0.1 0.2 0.3 0.4 0.5 0.6
8
9
MINIMUM PULSE DURATION AT VDD
vs
VDD THRESHOLD OVERDRIVE VOLTAGE
10
0.7 0.8 0.9 1
3
2
1
0
VDD − Threshold Overdrive Voltage − V
tw − Minimum Pulse Duration at VDD − µs
"#$%#&%'&(
"#$%#)'*&(
"#$%*+##&(
SGLS227C − DECEMBER 2003 − REVISED JUNE 2007
www.ti.com
10
TYPICAL CHARACTERISTICS
Figure 13
7
6
5
4
0 0.1 0.2 0.3 0.4 0.5 0.6
8
9
MINIMUM PULSE DURATION AT SENSE
vs
SENSE THRESHOLD OVERDRIVE VOLTAGE
10
0.7 0.8 0.9 1
3
2
1
0
SENSE − Threshold Overdrive Voltage − V
tw − Minimum Pulse Duration at SENSE − µs
Revision History
DATE REV PAGE SECTION DESCRIPTION
6/07
C
Front Page —Updated front page.
6/07
C
3 — Functional block diagram change.
NOTE:Page numbers for previous revisions may differ from page numbers in the current version.
PACKAGE OPTION ADDENDUM
www.ti.com 22-Feb-2012
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TPS3803-01MDCKREP ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TPS3803-01QDCKREP ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TPS3803G15MDCKREP ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TPS3803G15QDCKREP ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TPS3805H33MDCKREP ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TPS3805H33QDCKREP ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
V62/04648-01XE ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
V62/04648-02XE ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
V62/04648-03XE ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
V62/04648-04XE ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
V62/04648-05XE ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
V62/04648-06XE ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
PACKAGE OPTION ADDENDUM
www.ti.com 22-Feb-2012
Addendum-Page 2
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF TPS3803-01-EP, TPS3803G15-EP, TPS3805H33-EP :
•Catalog: TPS3803-01, TPS3803G15, TPS3805H33
•Automotive: TPS3803-01-Q1, TPS3803G15-Q1, TPS3805H33-Q1
NOTE: Qualified Version Definitions:
•Catalog - TI's standard catalog product
•Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
TPS3803-01QDCKREP SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
TPS3803G15MDCKREP SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
TPS3803G15QDCKREP SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
TPS3805H33MDCKREP SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
TPS3805H33QDCKREP SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
PACKAGE MATERIALS INFORMATION
www.ti.com 9-Aug-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
TPS3803-01QDCKREP SC70 DCK 5 3000 202.0 201.0 28.0
TPS3803G15MDCKREP SC70 DCK 5 3000 202.0 201.0 28.0
TPS3803G15QDCKREP SC70 DCK 5 3000 202.0 201.0 28.0
TPS3805H33MDCKREP SC70 DCK 5 3000 202.0 201.0 28.0
TPS3805H33QDCKREP SC70 DCK 5 3000 202.0 201.0 28.0
PACKAGE MATERIALS INFORMATION
www.ti.com 9-Aug-2012
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated