10 | 9 8 | 6 4 3 MATERIAL NO. MATERIAL NO. STUD "Ss" ye "c" "UO" "ID" STOCK "H" Loose PIECE | ENG-NO. [Tape MoUNTED| ENG-NO- | size (2)z.005/0.13} MAX. MIN. MAX. MIN. THICKNESS | #.020/0.51 190690027 | AA-120-02 | 190690028 AA-120-02T | 2 | .094/(2.39) 190690029 | AA-120-04 | 190690030 AA-120-04T | 4 | .1197(3.02) |.235/(6.00) | .157/(3.99) | .484/(12.29) |.062/(1.57) | .028/(0.7 1) 190690031 | AA-120-06 | 190690032 AA-120-06T| 6 | .146/(3.71) 190690033 | AA-I2I-06 | 190690034 AA-i2\-06T | 6 | .146/(3.71) 190690035 | AA-I21-08 | 190690036 AA-121-08T | 8 | .173/(4.39) . . . . . . . . .028/(0.7 1) | I. . 90690037 | aac D101 190690038 AASB EIT Po 9B E03 Toe (8:18) | -270/16.86) | .641/(16.28) | .062/(1.57) 1. 155/(29.34) 190690039 | AA-121-209 | 190690475 AA-21-209T| 209 | .209/(5. 18) 190690040 | AA-122-10 | 190690041 AA-122-10T | 10 | .198/(5.03) 190690042 | AA-122-14 | 190690044 AA-122-14T | 14 | .265A6.71) | .477/012, 1) | -386/(9.80) | .835/(21.21) |.062/(1.57) | .028/(0.7 1) 190690045 | AA-122-56 | 190690046 AA-122-56T | 56 | .328/(8.33) 190690047 | AA-I26-10 | ------- | ------- iO. | .198/(5.03) 190690048 | AA-126-14 | 190690128 AA-126-14T | 14 | .265/6.71) 552/(14.02) | 1.034/(26.26) |, . .031/(0.79) | 1.342/(34.09) [90690051 | AA-l26-56. | ------- | ===-=== 56 | .328/(8.33) | 47 (13-82) 059/( 1.40) 190690049 | AA-126-38 | 190690050 AA-126-38T | 38 | .390/(9.91) 190690052 AA- 132-04 190690053 AA-132-04T 4 -119/(3.02) 190690054 _ | AA-132-06 | 190690055 AA-|32-06T | 6 146/(03.71) | .264/(6.70) | -240/(6.10) | -582/(14.78) | .062/(1.57) | -028/(0.7 1) 90690056 | AA-132-08 | 190690057 AA-132-08T | 8 | .173/(4.39) 1 155/(29.34) 190690061 | AA-133-10 | 190690062 AA-133-10T | 10 | .198/(5.03) |.283/(7.20) | .240/(6.10) | .591/(I5.00) |.062/(1.57)| .028/(0.71) | * 190690024 | AA-II1I-02 | [90690191 AA-I11I-02T | 2 | .094/(2.39) 90690025 | AAzII1I<04 1 190690026 RALTIO4T a TSO) 1 97/15.00) | -173/(4.40) | .490/(12.40) ].055/(1.40) | .0317/(0.79) L oo "Tp" MIN. "H" WJ TO TOP PART Sa Ss WwW 7 L rz Z| CH Ca tT SALES DRAWING 6165 4.19. C aSS QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS cq gHRD A! LE NOTE(S): MIN. |). =| [SymBois| (UNLESS SPECIFIED) IN/MM --7 INCH PROJECT NON . in = = = mm INCH DRAWN BY DATE TITLE |. MATERIAL: COPPER. ONS28 Z\W-0 PLACES |E--- _[z-- DEROSS 2000/6413 RING TONGUE TERMINAL SACL DIMENSIONS IN IN ai, |e poss [pass (RECRED BY DATE KRIMPTITE, 100 SERIES 3. ALL DIMENSIONS IN INCHES/(MM). Ses Jel, BP eLACES HE fe , PS B==/5|\/=0 [2 PLACeSs|+ + JHACKNEY __2000/6/13 22-18 AWG WIRE SIZE: ntSszaiy 1 PLACE |t-- Jt--- APPROVED BY DATE 22-18 AWG weetZe ANGULAR $===>WMACNEIL 2oto/t1/17fRolex =MOLEX INCORPORATED 0.25-1.5 MM? NS26 MATERIAL NO. DOCUMENT NO. SHEET NO. 4. PARTS ARE ROHS COMPLIANT. Poet DRAFT WHERE APPLICABLE] SEE CHART |SD-19069-004 1 OF 1 Mm 55 = _ WITH? DRE Ns SZE| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX C2 wu INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_B_P_ME_T Rev. D s002/04/02, | 9 | 8 7 an 5 | 4 | 3 | 2 1