MC10EL16, MC100EL16
http://onsemi.com
4
Table 6. 100EL SERIES PECL DC CHARACTERISTICS VCC = 5.0 V; VEE = 0 V (Note 9)
−40°C 25°C 85°C
Symbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit
IEE Power Supply Current 18 22 18 22 21 26 mA
VOH Output HIGH Voltage (Note 10) 3915 3995 4120 3975 4045 4120 3975 4050 4120 mV
VOL Output LOW Voltage (Note 10) 3170 3305 3445 3190 3295 3380 3190 3295 3380 mV
VIH Input HIGH Voltage (Single−Ended) 3835 4120 3835 4120 3835 4120 mV
VIL Input LOW Voltage (Single−Ended) 3190 3525 3190 3525 3190 3525 mV
VBB Output Voltage Reference 3.62 3.74 3.62 3.74 3.62 3.74 V
VIHCMR Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 11)
2.5 4.6 2.5 4.6 2.5 4.6 V
IIH Input HIGH Current 150 150 150 mA
IIL Input LOW Current 0.5 0.5 0.5 mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
9. Input and output parameters vary 1:1 with VCC. VEE can vary +0.8 V / −0.5 V.
10.Outputs are terminated through a 50 W resistor to VCC − 2.0 V.
11 . VIHCMR min varies 1:1 with VEE, VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential input
signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPPmin and 1 V.
Table 7. 100EL SERIES NECL DC CHARACTERISTICS VCC = 0 V; VEE = −5.0 V (Note 12)
−40°C 25°C 85°C
Symbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit
IEE Power Supply Current 18 22 18 22 21 26 mA
VOH Output HIGH Voltage (Note 13) −1085 −1005 −880 −1025 −955 −880 −1025 −955 −880 mV
VOL Output LOW Voltage (Note 13) −1830 −1695 −1555 −1810 −1705 −1620 −1810 −1705 −1620 mV
VIH Input HIGH Voltage (Single−Ended) −1165 −880 −1165 −880 −1165 −880 mV
VIL Input LOW Voltage (Single−Ended) −1810 −1475 −1810 −1475 −1810 −1475 mV
VBB Output Voltage Reference −1.38 −1.26 −1.38 −1.26 −1.38 −1.26 V
VIHCMR Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 14)
−2.5 −0.4 −2.5 −0.4 −2.5 −0.4 V
IIH Input HIGH Current 150 150 150 mA
IIL Input LOW Current 0.5 0.5 0.5 mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
12.Input and output parameters vary 1:1 with VCC. VEE can vary +0.8 V / −0.5 V.
13.Outputs are terminated through a 50 W resistor to VCC − 2.0 V.
14. VIHCMR min varies 1:1 with VEE, VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential
input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPPmin
and 1 V.