TS63 Vishay Sfernice Multi-Turn Surface Mount Miniature 1/4" Square Cermet Trimmers, Fully Sealed FEATURES * 0.25 W at 85 C RoHS * Industrial grade COMPLIANT * Multi-turn operation The TS63 multiturn trimmer has been designed for use in PCB surface mounting applications. Three variations are available according to the positioning of the control screw and contact positions. The cermet track gives a high stability performance with an extended ohmic capacity of 10 to 2 M. * A low contact resistance variation (down to 2 % Rn) * Low end contact resistance (1 typical) * Full sealing * Tests according to CECC 41 000 DIMENSIONS in millimeters TS63X RECOMMENDED SOLDERING AREAS slot 0.5 x 0.5 5.8 0.10 0.25 1 5 max O 1.8 c 1 0.10 2.54 0.7 b c 2.54 2.54 O 0.45 b 6.85 max a 0.20 6.7 max 2.54 6.85 max 7.5 TS63Z 3 6.85 max b O 1.8 slot 0.5 x 0.5 5 max 1.3 0.1 9.3 1 0.1 0.25 6.85 max a c 7.6 max 8.85 max 1 O 0.45 5.3 max 2.54 2.54 2.54 2.54 TS63Y 6.85 max 2.54 c 0.3 a O 0.45 1.3 0.1 b c 5 max 6.85 max b slot 0.5 x 0.5 a 6.85 max 2.54 2.54 2.54 O 1.8 1 0.10 1 3 7.5 6.7 max 8 max CIRCUIT DIAGRAM a c (1) (3) b cw Tolerance unless otherwise specified 0.5 www.vishay.com 30 For technical questions, contact: sfer@vishay.com Document Number: 51011 Revision: 24-Jul-07 TS63 Multi-Turn Surface Mount Miniature 1/4" Square Cermet Trimmers, Fully Sealed Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive Element Cermet Electrical Travel 13 turns 2 10 to 2 M Resistance Range Standard Series 1-2-5 Tolerance Standard 10 % On request Power Rating 5% Linear 0.25 W at 85 C Logarithmic not applicable Temperature Coefficient See Standard Resistance Element Data Limiting Element Voltage (Linear Law) 250 V 2 % Rn or 2 Contact Resistance Variation End Resistance (Typical) 1 Dielectric Strength (RMS) 1000 V Insulation Resistance 106 M Mechanical Travel Operating Torque (max. Ncm) End Stop Torque Unit Weight (max. g) Wiper (actual travel) POWER RATING CHART 15 turns 5 1.5 clutch action 0.5 Positioned at approx. 50 % ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 55 C to + 155 C 55/125/56 sealed container solder immersion IP67 RATED POWER IN W MECHANICAL SPECIFICATIONS 0.25 0.125 0 0 50 85 100 AMBIENT TEMPERATURE IN C 155 PERFORMANCE CECC 41100 TESTS Climatic Sequence CONDITIONS Phase A dry heat 125 C Phase B damp heat Phase C cold - 55 C Phase D damp heat 5 cycles TYPICAL VALUES AND DRIFTS RT (%) REQUIREMENTS RT 0.5 % 1% 2% 3% 0.5 % 1% Rotational Life (Electrical, Mechanical) 200 cycles at rated power 2% Contact res. variat.: < 3 % Rn 1000 h at rated power 90'/30' - ambient temp. 85 C 2% Contact res. variat.: < 3 % Rn Shock Vibration Document Number: 51011 Revision: 24-Jul-07 5 cycles - 55 C to + 125 C R1-2 (%) R1-2 3% 56 days 40 C 93 % RH Thermal Shock RT (%) RT 2% Long Term Damp Heat Load Life R1-2 (%) R1-2 Dielectric strength: 250 V RMS Insulation resistance: > 100 M 1.5 % 50 g at 11 ms 3 successive shocks in 3 directions 1% 10 - 55 Hz 0.75 mm or 10 g for 6 hours 1% V1-2 V1-3 V1-2 V1-3 For technical questions, contact: sfer@vishay.com Dielectric strength: 1000 V RMS Insulation resistance: > 104 M (2 % + 3 ) Contact res. variat.: < 1 % Rn 4% 1% 2% Contact res. variat.: < 1 % Rn 1% 0.5 % 2% 0.1 % 2% 0.1 % V1-2 V1-3 <1% 0.2 % V1-2 V1-3 < 0.2 % www.vishay.com 31 TS63 Vishay Sfernice Multi-Turn Surface Mount Miniature 1/4" Square Cermet Trimmers, Fully Sealed MARKING STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW MAX. MAX. MAX. CUR. POWER WORKING THROUGH AT 85 C VOLTAGE WIPER W V mA 10 20 50 100 200 500 1K 2K 5K 10K 20K 25K 50K 100K 200K 250K 500K 1M 2M 0.25 1.58 2.23 3.53 5.00 7.07 11.2 15.8 22.3 35.3 50.0 70.7 79.0 112 158 224 250 250 250 250 158 112 77 50 35 22 15.8 11.2 7.1 5.0 3.5 3.2 2.2 1.6 1.1 1.1 0.50 0.25 0.125 0.25 0.25 0.13 0.06 0.03 Printed: VISHAY trademark, model, style, ohmic value (in , k, M), tolerance (in %) only if non standard, manufacturing date, marking of terminal 3. TYPICAL TCR - 55 C + 125 C ppm/C SOLDERING RECOMMENDATION Soldering cycle: 10 s at 220 C max or with an 40 W iron: 3 s at 350 C Soldering is recommended by reflow or vapour phase. 100 PACKAGING - X, Y and Z types: on tape and reel (Dia. 330 mm) of 500 pieces, code TR500. - On request in magazine pack by 50 pieces (Tube) code TU. Version Z O 13 O 330 22.4 16 3 O 1.5 O 1.5 12 Version X.Y 4 2 6 O 1.5 +- 0.1 0 12 0.3 4 2 2 1.8 16 0.3 12 MAX 6.05 O 1.5 www.vishay.com 32 7.06 For technical questions, contact: sfer@vishay.com Document Number: 51011 Revision: 24-Jul-07 TS63 Multi-Turn Surface Mount Miniature 1/4" Square Cermet Trimmers, Fully Sealed Vishay Sfernice ORDERING INFORMATION TS63 MODEL Y STYLE 500 k OHMIC VALUE 10 % TOLERANCE TR500 PACKAGING e3 LEAD FINISH TR500: Tape and reel On request: TU50: Tube e3: pure Sn SAP PART NUMBERING GUIDELINES T S MODEL 6 3 Y 5 STYLE 0 OHMIC VALUE 4 K TOL R 1 PACKAGING CODE 0 SPECIAL (IF APPLICABLE) See the end of this data book for conversion tables Document Number: 51011 Revision: 24-Jul-07 For technical questions, contact: sfer@vishay.com www.vishay.com 33 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1