www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51011
30 Revision: 24-Jul-07
TS63
Vishay Sfernice
Multi-Turn Surface Mount
Miniature 1/4" Square Cermet Trimmers, Fully Sealed
The TS63 multiturn trimmer has been designed for use in
PCB surface mounting applications.
Three variations are available according to the positioning of
the control screw and contact positions.
The cermet track gives a high stability performance with an
extended ohmic capacity of 10 Ω to 2 MΩ.
FEATURES
•0.25 W at 85 °C
•Industrial grade
•Multi-turn operation
•A low contact resistance variation (down to 2 % Rn)
•Low end contact resistance (1 Ω typical)
•Full sealing
•Tests according to CECC 41 000
DIMENSIONS in millimeters
TS63X
TS63Z
TS63Y
RECOMMENDED
SOLDERING AREAS
CIRCUIT DIAGRAM
Tolerance unless otherwise specified ± 0.5
b
c
Ø 0.45
slot 0.5 x 0.5
0.25
5.8 ± 0.10
Ø 1.8
0.7
6.85 max
6.85 max
0.20
2.54
2.54
5 max
1 ± 0.10
6.7 max
Ø 1.8
1.3 ± 0.1
7.6 max
2.54
2.54
Ø 0.45
6.85 max
0.25
slot 0.5 x 0.5
6.85 max
5 max
1 ± 0.1
8.85 max
5.3 max
c
b
1.3 ± 0.1
1 ± 0.10
Ø 0.45
a
6.85 max
0.3
Ø 1.8
8 max
slot 0.5 x 0.5
2.54
2.54
6.85 max
5 max
6.85
max
6.7 max
1
2.54
2.54
7.5
c
b
a
3
b
ca
9.3
2.54 2.54
1
2.54
2.54 1
7.5
c
b
a
3
ac
b
cw
(3)
(1)
RoHS
COMPLIANT
Document Number: 51011 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 24-Jul-07 31
TS63
Multi-Turn Surface Mount
Miniature 1/4" Square Cermet Trimmers, Fully Sealed Vishay Sfernice
MECHANICAL SPECIFICATIONS
Mechanical Travel 15 turns ± 5
Operating Torque (max. Ncm) 1.5
End Stop Torque clutch action
Unit Weight (max. g) 0.5
Wiper (actual travel)
Positioned at approx. 50 %
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 55 °C to + 155 °C
Climatic Category 55/125/56
Sealing sealed container
solder immersion IP67
POWER RATING CHART
ELECTRICAL SPECIFICATIONS
Resistive Element Cermet
Electrical Travel 13 turns ± 2
Resistance Range 10 Ω to 2 MΩ
Standard Series 1 - 2 - 5
Tolerance Standard ± 10 %
On request ± 5 %
Power Rating Linear 0.25 W at 85 °C
Logarithmic not applicable
Temperature Coefficient See Standard Resistance Element Data
Limiting Element Voltage (Linear Law) 250 V
Contact Resistance Variation 2 % Rn or 2 Ω
End Resistance (Typical) 1 Ω
Dielectric Strength (RMS) 1000 V
Insulation Resistance 106 MΩ
0.25
0.125
00 50 85 100 155
AMBIENT TEMPERATURE IN °C
RATED POWER IN W
PERFORMANCE
CECC 41100 TYPICAL VALUES AND DRIFTS
TESTS CONDITIONS ΔRT
RT (%) REQUIREMENTS ΔR1-2
R1-2 (%) ΔRT
RT (%) ΔR1-2
R1-2 (%)
Climatic Sequence
Phase A dry heat 125 °C
Phase B damp heat
Phase C cold - 55 °C
Phase D damp heat 5 cycles
± 2 % ± 3 % ± 0.5 % ± 1 %
Long Term Damp Heat 56 days
40 °C 93 % RH
± 2 % ± 3 % ± 0.5 % ± 1 %
Dielectric strength: 250 V RMS
Insulation resistance: > 100 MΩ
Dielectric strength: 1000 V RMS
Insulation resistance: > 104 MΩ
Rotational Life
(Electrical, Mechanical) 200 cycles at rated power ± 2 % ± (2 % + 3 Ω)
Contact res. variat.: < 3 % Rn Contact res. variat.: < 1 % Rn
Load Life 1000 h at rated power
90’/30’ - ambient temp. 85 °C
± 2 % ± 4 % ± 1 % ± 2 %
Contact res. variat.: < 3 % Rn Contact res. variat.: < 1 % Rn
Thermal Shock 5 cycles
- 55 °C to + 125 °C ± 1.5 % ΔV1-2
V1-3 ± 1 % ± 0.5 % ΔV1-2
V1-3 < ± 1 %
Shock
50 g at 11 ms
3 successive shocks
in 3 directions
± 1 % ± 2 % ± 0.1 % ± 0.2 %
Vibration
10 - 55 Hz
0.75 mm or 10 g
for 6 hours
± 1 % ΔV1-2
V1-3 ± 2 % ± 0.1 % ΔV1-2
V1-3 < ± 0.2 %
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51011
32 Revision: 24-Jul-07
TS63
Vishay Sfernice Multi-Turn Surface Mount
Miniature 1/4" Square Cermet Trimmers, Fully Sealed
MARKING
Printed: VISHAY trademark, model, style, ohmic value (in Ω,
kΩ, MΩ), tolerance (in %) only if non standard, manufacturing
date, marking of terminal 3.
SOLDERING RECOMMENDATION
Soldering cycle: 10 s at 220 °C max or with an 40 W iron:
3 s at 350 °C
Soldering is recommended by reflow or vapour phase.
STANDARD RESISTANCE ELEMENT DATA
STANDARD
RESISTANCE
VALUES
LINEAR LAW TYPICAL
TCR
- 55 °C
+ 125 °C
MAX.
POWER
AT 85 °C
MAX.
WORKING
VOLTAG E
MAX. CUR.
THROUGH
WIPER
ΩWV mAppm/°C
10
20
50
100
200
500
1K
2K
5K
10K
20K
25K
50K
100K
200K
250K
500K
1M
2M
0.25
0.25
0.25
0.13
0.06
0.03
1.58
2.23
3.53
5.00
7.07
11.2
15.8
22.3
35.3
50.0
70.7
79.0
112
158
224
250
250
250
250
158
112
77
50
35
22
15.8
11.2
7.1
5.0
3.5
3.2
2.2
1.6
1.1
1.1
0.50
0.25
0.125
± 100
PACKAGING
- X, Y and Z types: on tape and reel (Dia. 330 mm) of 500 pieces, code TR500.
- On request in magazine pack by 50 pieces (Tube) code TU.
212
4
Ø 1.5
+ 0.1
- 0
1.8
16
6
0.3
Ø 1.5
Version X.Y
3
Ø 330 22.4
Ø 13
16
Ø 1.5
Ø 1.5
12
4
2
2
12° MAX
6.05
7.06
0.3
Version Z
Document Number: 51011 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 24-Jul-07 33
TS63
Multi-Turn Surface Mount
Miniature 1/4" Square Cermet Trimmers, Fully Sealed Vishay Sfernice
ORDERING INFORMATION
TS63
MODEL
Y
STYLE
500 kΩ
OHMIC VALUE
± 10 %
TOLERANCE
TR500
PA CK A GI N G
e3
LEAD FINISH
TR500: Tape and reel
On request: TU50: Tube
e3: pure Sn
SAP PART NUMBERING GUIDELINES
TS63
Y504 KR 10
MODEL STYLE OHMIC
VALUE TOL PACKAGING
CODE
SPECIAL
(IF APPLICABLE)
See the end of this data book for conversion tables
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
