General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print. A subsidiary of
TT electronics plc
• 4222 South Staples Street • Corpus Christi Texas 78411 USA
© IRC Advanced Film Division
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
High Temperature TaNFilm®
Surface Mount Voltage Divider
• Popular 1206 Chip Size
• 100Ω to 25KΩ per resistor
• Operating temperature to 200°C
• Gold and 100% matte tin terminations available
• TaNFilm® element provides excellent stability in harsh environments
PFC HT Divider Series
Electrical Data
Characteristic Each
Resistor
Total
Resistance
Resistance Range 100 - 25KΩ50KΩ
Power Rating 100mW 125mW
Absolute TCR to ±25ppm/°C
Tracking TCR to ±5ppm/°C
Maximum Voltage Rating 100 volts
Operating Temperature Range -65°C to +200°C
Noise Less than -25 db
Termination Wire/epoxy bondable gold or 100% matte tin (Pb-free)
Environmental Data
Environmental Test
MIL-PRF-55342
Maximum
∆R
Maximum
∆Ratio
Thermal Shock ±0.10% ±0.01%
Short Time Overload ±0.05% ±0.01%
High Temperature Exposure ±0.10% ±0.02%
Effects of Solder ±0.10% ±0.02%
Moisture Resistance ±0.10% ±0.05%
Life:
1000 hours 200°C, no load ±1.0% ±0.10%
Life:
1000 hours, 150°C, rated power ±0.5% ±0.05%
100
50
50 100 150 200
Temperature in °C
% Rated Power
Power Derating Curve
PFC HT Divider Series Issue January 2009 Sheet 1 of 2