High Temperature TaNFilm(R) Surface Mount Voltage Divider PFC HT Divider Series * * * * * Popular 1206 Chip Size 100 to 25K per resistor Operating temperature to 200C Gold and 100% matte tin terminations available TaNFilm(R) element provides excellent stability in harsh environments Electrical Data Characteristic Resistance Range Power Rating Each Resistor Total Resistance 100 - 25K 50K 100mW 125mW Absolute TCR to 25ppm/C Tracking TCR to 5ppm/C Maximum Voltage Rating 100 volts Operating Temperature Range -65C to +200C Noise Less than -25 db Termination Wire/epoxy bondable gold or 100% matte tin (Pb-free) Environmental Data Environmental Test MIL-PRF-55342 Power Derating Curve Maximum Maximum R Ratio Thermal Shock 0.10% 0.01% Short Time Overload 0.05% 0.01% High Temperature Exposure 0.10% 0.02% Effects of Solder 0.10% 0.02% Moisture Resistance 0.10% 0.05% Life: 1000 hours 200C, no load 1.0% 0.10% Life: 1000 hours, 150C, rated power 0.5% 0.05% % Rated Power 100 50 50 100 150 200 Temperature in C General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC's own data and is considered accurate at time of going to print. (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com A subsidiary of TT electronics plc PFC HT Divider Series Issue January 2009 Sheet 1 of 2 High Temperature TaNFilm(R) Surface Mount Voltage Divider Physical Data Top Side Recommended Solder Pad Bottom 0.0895" 0.058" .005" 0.024" 0.004" 0.0725" 0.015" 0.005" 0.027" 0.003" 0.180" 0.035" 0.126" 0.006" 0.030" min 0.0225" 0.050" 0.015" 0.005" 0.010" 0.004" Dimensions are in inches 0.058" Ordering Data Prefix 0.0315" Packaging Data PFC - D1206HT - 03 - 1002 - 1001 - F B PACKAGING ON 8mm TAPE Model D1206HT - Divider network with Gold termination D1206HTLF - Divider network with 100% tin Pb-free termination TCR Code 01 = 100ppm/C; 02 = 50ppm/C; 03 = 25ppm/C R1 Resistance Code Standard 4-Digit resistance code. Ex: 1002 = 10K; 1000 = 100 USER DIRECTION OF FEED R2 Resistance Code Standard 4-Digit resistance code Absolute Tolerance F = 1% Ratio Tolerance F = 1%; D = 0.5%; B = 0.1% (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com PFC HT Divider Series Issue January 2009 Sheet 2 of 2