SG PARAMETER*** SYMBOL MAX UNITS 1 1 1 1 1 1 Quiescent current Input offset voltage Input offset voltage Input bias current, +IN Input bias current, -IN Input offset current IQ VOS VOS +IB -IB IOS 25C 25C 25C 25C 25C 25C 150V 15V 150V 150V 150V 150V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 25 4 2 50 50 100 mA mV mV pA pA pA 3 3 3 3 3 3 Quiescent current Input offset voltage Input offset voltage Input bias current, +IN Input bias current, -IN Input offset current IQ VOS VOS +IB -IB IOS -55C -55C -55C -55C -55C -55C 150V 15V 150V 150V 150V 150V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 28 6.4 4.4 50 50 50 mA mV mV pA pA pA 2 2 2 2 2 2 Quiescent current Input offset voltage Input offset voltage Input bias current, +IN Input bias current, -IN Input offset current IQ VOS VOS +IB -IB IOS 125C 125C 125C 125C 125C 125C 150V 15V 150V 150V 150V 150V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 28 7 5 10 10 10 mA mV mV nA nA nA 4 4 4 4 4 4 4 4 Output voltage, IO = 200mA Output voltage, IO = 70mA Output voltage, IO = 20mA Current limits Stability/noise Slew rate Open loop gain Common-mode rejection VO VO VO ICL EN SR AOL CMR 25C 25C 25C 25C 25C 25C 25C 25C 50V 150V 48V 50V 150V 150V 150V 150V RL = 200 40 RL = 2K 141 RL = 2K 40 RCL = 10, RL = 200 60 CC = 68pF, RC = 100, AV = +1, CL = 470pF RL = 2K, AV = 100, CC = OPEN 400 RL = 2K, F = 15Hz, CC = OPEN 96 F = DC, VCM = 90V 90 112 1 V V V mA mV V/s dB dB 6 6 6 6 6 6 6 Output voltage, IO = 200mA Output voltage, IO = 70mA Output voltage, IO = 20mA Stability/noise Slew rate Open loop gain Common-mode rejection VO VO VO EN SR AOL CMR -55C -55C -55C -55C -55C -55C -55C 50V 150V 48V 150V 150V 150V 150V RL = 200 RL = 2K RL = 2K CC = 68pF, RC = 100, AV = +1, CL = 470pF RL = 2K, AV = 100, CC = OPEN RL = 2K, F = 15Hz, CC = OPEN F = DC, VCM = 90V 40 141 40 1 V V V mV V/s dB dB 5 5 5 5 5 5 5 Output voltage, IO = 150mA Output voltage, IO = 70mA Output voltage, IO = 20mA Stability/noise Slew rate Open loop gain Common-mode rejection VO VO VO EN SR AOL CMR 125C 125C 125C 125C 125C 125C 125C 40V 150V 48V 150V 150V 150V 150V RL = 200 RL = 2K RL = 2K CC = 68pF, RC = 100, AV = +1, CL = 470pF RL = 2K, AV = 100, CC = OPEN RL = 2K, F = 15Hz, CC = OPEN F = DC, VCM = 90V 30 141 40 1 V V V mV V/s dB dB BURN IN CIRCUIT TEMP. POWER MIN 400 96 90 400 96 90 * These components are used to stabilize device due to poor high frequency characteristics of burn in board. ** Input signals are calculated to result in internal power dissipation of approximately 2.1W at case temperature = 125C. TEST CONDITIONS *** An additional test is performed manually at TC = 25C which stresses power supply, common mode range and output swing to 225V (450V total). This data sheet has been carefullyCORPORATION checked and is believed to be reliable, however, no responsibility is assumed for possible* inaccuracies or omissions. All specifications subject to change without notice. APEX MICROTECHNOLOGY * TELEPHONE (520) 690-8600 * FAX (520) 888-3329 ORDERS (520) 690-8601 * EMAILare prodlit@apexmicrotech.com PA85MU REV A FEBRUARY 1998 (c) 1998 Apex Microtechnology Corp. 1