15TQ060SPbF Vishay High Power Products Schottky Rectifier, 15 A FEATURES * 150 C TJ operation Base cathode 2 Available * Very low forward voltage drop RoHS* * High frequency operation COMPLIANT * High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance * Guard ring for enhanced ruggedness and long term reliability 3 Anode 1 D2PAK N/C * Lead (Pb)-free ("PbF" suffix) * Designed and qualified for Q101 level DESCRIPTION PRODUCT SUMMARY IF(AV) 15 A VR 60 V The 15TQ060SPbF Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS VALUES Rectangular waveform VRRM UNITS 15 A 60 V IFSM tp = 5 s sine 1000 A VF 15 Apk, TJ = 125 C 0.56 V TJ Range - 55 to 150 C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage 15TQ060SPbF UNITS 60 V VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS Maximum average forward current See fig. 5 IF(AV) Maximum peak one cycle non-repetitive surge current See fig. 7 IFSM Non-repetitive avalanche energy EAS TJ = 25 C, IAS = 1.5 A, L = 11.5 mH Repetitive avalanche current IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 50 % duty cycle at TC = 104 C, rectangular waveform 5 s sine or 3 s rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied VALUES UNITS 15 A 1000 A 260 6 mJ 1.50 A * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94143 Revision: 26-May-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 15TQ060SPbF Vishay High Power Products Schottky Rectifier, 15 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 15 A Maximum forward voltage drop See fig. 1 VFM (1) TJ = 25 C 30 A 15 A TJ = 125 C 30 A Maximum reverse leakage current See fig. 2 Maximum junction capacitance Typical series inductance IRM (1) CT LS Maximum voltage rate of change dV/dt TJ = 25 C VR = Rated VR TJ = 125 C VALUES UNITS 0.62 0.82 V 0.56 0.71 0.80 mA 45 VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 C 720 pF Measured lead to lead 5 mm from package body 8.0 nH 10 000 V/s VALUES UNITS - 55 to 150 C Rated VR Note (1) Pulse width < 300 s, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS Maximum junction and storage temperature range TJ, TStg Maximum thermal resistance, junction to case RthJC DC operation See fig. 4 3.25 Typical thermal resistance, case to heatsink RthCS Mounting surface, smooth and greased 0.50 Approximate weight Mounting torque Marking device www.vishay.com 2 C/W 2 g 0.07 oz. minimum 6 (5) kgf * cm maximum 12 (10) (lbf * in) Case style D2PAK For technical questions, contact: diodes-tech@vishay.com 15TQ060S Document Number: 94143 Revision: 26-May-08 15TQ060SPbF Schottky Rectifier, 15 A 1000 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) 1000 Vishay High Power Products TJ = 150 C TJ = 125 C TJ = 25 C 100 10 1 TJ = 150 C 100 TJ = 125 C 10 TJ = 100 C 1 TJ = 75 C 0.1 TJ = 50 C 0.01 TJ = 25 C 0.001 0 0.4 0.8 1.2 1.6 0 2.0 10 VFM - Forward Voltage Drop (V) 30 20 50 40 60 VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 1000 TJ = 25 C 100 10 0 20 30 40 50 60 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 0.1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 0.01 0.001 0.00001 Single pulse (thermal resistance) 0.0001 0.001 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 10 . 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94143 Revision: 26-May-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 15TQ060SPbF Schottky Rectifier, 15 A 150 14 140 12 130 Average Power Loss (W) Allowable Case Temperature (C) Vishay High Power Products DC 120 110 Square wave (D = 0.50) 80 % rated VR applied 100 90 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 10 8 RMS limit 6 4 DC 2 See note (1) 0 80 0 5 10 15 0 25 20 Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current IFSM - Non-Repetitive Surge Current (A) 2 4 6 8 10 12 14 16 18 20 22 IF(AV) - Average Forward Current (A) IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics 1000 At any rated load condition and with rated VRRM applied following surge 100 100 10 1000 10 000 tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current L D.U.T. IRFP460 Rg = 25 Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 94143 Revision: 26-May-08 15TQ060SPbF Schottky Rectifier, 15 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 15 T Q 060 S 1 2 3 4 5 1 - Current rating (15 A) 2 - Circuit configuration: TRL PbF 6 7 T = TO-220 3 - Schottky "Q" series 4 - Voltage rating (060 = 60 V) 5 - 6 - S = D2PAK None = Tube (50 pieces) TRL = Tape and reel (left oriented) TRR = Tape and reel (right oriented) 7 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95014 Part marking information http://www.vishay.com/doc?95008 Packaging information http://www.vishay.com/doc?95032 Document Number: 94143 Revision: 26-May-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1