2N6071A/B Series Preferred Device Sensitive Gate Triacs Silicon Bidirectional Thyristors Designed primarily for fullwave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever fullwave silicon gate controlled solidstate devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied anode voltage with positive or negative gate triggering. http://onsemi.com TRIACS 4.0 A RMS, 200 - 600 V Features *Sensitive Gate Triggering Uniquely Compatible for Direct Coupling to TTL, HTL, CMOS and Operational Amplifier Integrated Circuit Logic Functions *Gate Triggering: 4 Mode - 2N6071A, B; 2N6073A, B; 2N6075A, B *Blocking Voltages to 600 V *All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and Stability *Small, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability *Device Marking: Device Type, e.g., 2N6071A, Date Code MT2 MT1 G REAR VIEW SHOW TAB 3 TO-225 CASE 077 STYLE 5 2 1 MARKING DIAGRAM 1. Cathode 2. Anode 3. Gate x y Y WW G YWW 2N 607xyG = 1, 3, 5 = A, B = Year = Work Week = Pb-Free Package ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet. Preferred devices are recommended choices for future use and best overall value. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2008 March, 2008 - Rev. 8 1 Publication Order Number: 2N6071/D 2N6071A/B Series MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Symbol Rating Value Unit *Peak Repetitive OffState Voltage (Note 1) (TJ = *40 to 110C, Sine Wave, 50 to 60 Hz, Gate Open) 2N6071A,B 2N6073A,B 2N6075A,B VDRM, VRRM *OnState RMS Current (TC = 85C) Full Cycle Sine Wave 50 to 60 Hz IT(RMS) 4.0 A ITSM 30 A I2t 3.7 A2s PGM 10 W PG(AV) 0.5 W *Peak Non-repetitive Surge Current (One Full cycle, 60 Hz, TJ = +110C) Circuit Fusing Considerations (t = 8.3 ms) *Peak Gate Power (Pulse Width 1.0 ms, TC = 85C) *Average Gate Power (t = 8.3 ms, TC = 85C) *Peak Gate Voltage (Pulse Width 1.0 ms, TC = 85C) V 200 400 600 VGM 5.0 V *Operating Junction Temperature Range TJ -40 to +110 C *Storage Temperature Range Tstg -40 to +150 C - 8.0 in. lb. Mounting Torque (632 Screw) (Note 2) Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. VDRM and VRRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. 2. Torque rating applies with use of a compression washer. Mounting torque in excess of 6 in. lb. does not appreciably lower casetosink thermal resistance. Main terminal 2 and heatsink contact pad are common. THERMAL CHARACTERISTICS Characteristic Symbol Max Unit *Thermal Resistance, Junction-to-Case RqJC 3.5 C/W Thermal Resistance, Junction-to-Ambient RqJA 75 C/W TL 260 C Maximum Lead Temperature for Soldering Purposes 1/8 from Case for 10 Seconds *Indicates JEDEC Registered Data. http://onsemi.com 2 2N6071A/B Series ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted; Electricals apply in both directions) Symbol Characteristic Min Typ Max Unit - - 10 2 mA mA - - 2 V - 1.4 2.5 0.2 - - OFF CHARACTERISTICS *Peak Repetitive Blocking Current (VD = VDRM = VRRM; Gate Open) IDRM, IRRM TJ = 25C TJ = 110C ON CHARACTERISTICS *Peak OnState Voltage (Note 3) (ITM = "6.0 A Peak) VTM *Gate Trigger Voltage (Continuous DC), All Quadrants (Main Terminal Voltage = 12 Vdc, RL = 100 W, TJ = -40C) VGT Gate Non-Trigger Voltage, All Quadrants (Main Terminal Voltage = 12 Vdc, RL = 100 W, TJ = 110C) VGD *Holding Current (Main Terminal Voltage = 12 Vdc, Gate Open, Initiating Current = "1 Adc) TJ = -40C TJ = 25C IH TurnOn Time (ITM = 14 Adc, IGT = 100 mAdc) tgt V V mA - - 30 15 - 1.5 - ms QUADRANT (Maximum Value) Gate Trigger Current (Continuous DC) (Main Terminal Voltage = 12 Vdc, RL = 100 W) Type IGT @ TJ I mA II mA III mA IV mA 2N6071A 2N6073A 2N6075A +25C 5 5 5 10 -40C 20 20 20 30 2N6071B 2N6073B 2N6075B +25C 3 3 3 5 -40C 15 15 15 20 dv/dt(c) - 5 - V/ms DYNAMIC CHARACTERISTICS Critical Rate of Rise of Commutation Voltage @ VDRM, TJ = 85C, Gate Open, ITM = 5.7 A, Exponential Waveform, Commutating di/dt = 2.0 A/ms 3. Pulse Test: Pulse Width 2.0 ms, Duty Cycle 2%. *Indicates JEDEC Registered Data. SAMPLE APPLICATION: TTLSENSITIVE GATE 4 AMPERE TRIAC TRIGGERS IN MODES II AND III 0V -VEE 14 MC7400 4 7 VEE = 5.0 V + 510 W 2N6071A Trigger devices are recommended for gating on Triacs. They provide: 1. Consistent predictable turnon points. 2. Simplified circuitry. 3. Fast turnon time for cooler, more efficient and reliable operation. http://onsemi.com 3 LOAD 115 VAC 60 Hz 2N6071A/B Series Voltage Current Characteristic of Triacs (Bidirectional Device) Symbol Parameter VDRM Peak Repetitive Forward Off State Voltage IDRM Peak Forward Blocking Current VRRM Peak Repetitive Reverse Off State Voltage IRRM Peak Reverse Blocking Current VTM Maximum On State Voltage IH Holding Current + Current Quadrant 1 MainTerminal 2 + VTM on state IH IRRM at VRRM off state IH Quadrant 3 MainTerminal 2 - + Voltage IDRM at VDRM VTM Quadrant Definitions for a Triac MT2 POSITIVE (Positive Half Cycle) + (+) MT2 Quadrant II (+) MT2 Quadrant I (+) IGT GATE (-) IGT GATE MT1 MT1 REF REF IGT - + IGT (-) MT2 Quadrant III (-) MT2 Quadrant IV (+) IGT GATE (-) IGT GATE MT1 MT1 REF REF MT2 NEGATIVE (Negative Half Cycle) All polarities are referenced to MT1. With in-phase signals (using standard AC lines) quadrants I and III are used. SENSITIVE GATE LOGIC REFERENCE IC Logic Functions Firing Quadrant I TTL HTL CMOS (NAND) III 2N6071A Series 2N6071A Series 2N6071A Series 2N6071A Series 2N6071B Series 2N6071B Series 2N6071A Series 2N6071A Series 2N6071B Series IV 2N6071B Series CMOS (Buffer) Operational Amplifier II 2N6071A Series 2N6071A Series Zero Voltage Switch http://onsemi.com 4 2N6071A/B Series 110 110 = 30 TC , CASE TEMPERATURE ( C) TC , CASE TEMPERATURE ( C) 60 100 = 30 60 90 90 120 180 dc a 80 70 120 90 180 a 80 70 1.0 2.0 3.0 IT(AV), AVERAGE ONSTATE CURRENT (AMP) 4.0 = CONDUCTION ANGLE 0 1.0 2.0 3.0 IT(RMS), RMS ONSTATE CURRENT (AMP) Figure 1. Average Current Derating 8.0 a a 180 a 6.0 P(AV) , AVERAGE POWER (WATTS) P(AV) , AVERAGE POWER (WATTS) 4.0 Figure 2. RMS Current Derating 8.0 dc 120 = CONDUCTION ANGLE 90 60 4.0 = 30 2.0 0 dc a 6.0 = 180 = CONDUCTION ANGLE 120 4.0 30 2.0 60 90 0 0 1.0 2.0 3.0 IT(AV), AVERAGE ONSTATE CURRENT (AMP) 4.0 1.0 2.0 3.0 IT(RMS), RMS ONSTATE CURRENT (AMP) 0 Figure 3. Power Dissipation 3.0 OFFSTATE VOLTAGE = 12 Vdc ALL MODES 2.0 1.0 0.7 0.5 0.3 -60 -40 -20 0 20 40 60 80 100 TJ, JUNCTION TEMPERATURE (C) 4.0 Figure 4. Power Dissipation I GT , GATE TRIGGER CURRENT (NORMALIZED) V GT , GATE TRIGGER VOLTAGE (NORMALIZED) dc a = CONDUCTION ANGLE 0 90 100 120 140 3.0 OFFSTATE VOLTAGE = 12 Vdc ALL MODES 2.0 1.0 0.7 0.5 0.3 -60 Figure 5. Typical Gate-Trigger Voltage -40 -20 0 20 40 60 80 100 TJ, JUNCTION TEMPERATURE (C) 120 Figure 6. Typical Gate-Trigger Current http://onsemi.com 5 140 2N6071A/B Series 40 IH, HOLDING CURRENT (NORMALIZED) 3.0 30 20 10 ITM , ONSTATE CURRENT (AMP) 7.0 5.0 2.0 1.0 0.7 0.5 0.3 -60 TJ = 110C 3.0 GATE OPEN APPLIES TO EITHER DIRECTION -40 -20 0 20 40 60 80 100 120 140 TJ, JUNCTION TEMPERATURE (C) 2.0 Figure 8. Typical Holding Current TJ = 25C 1.0 34 32 PEAK SINE WAVE CURRENT (AMP) 0.7 0.5 0.3 0.2 30 28 26 24 TJ = -40 to +110C f = 60 Hz 22 20 18 16 0.1 0 1.0 2.0 3.0 4.0 14 1.0 5.0 2.0 4.0 5.0 7.0 10 NUMBER OF FULL CYCLES VTM, ONSTATE VOLTAGE (VOLTS) Figure 7. Maximum On-State Characteristics Z JC(t), TRANSIENT THERMAL IMPEDANCE (C/W) 3.0 Figure 9. Maximum Allowable Surge Current 10 5.0 MAXIMUM 3.0 2.0 TYPICAL 1.0 0.5 0.3 0.2 0.1 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 t, TIME (ms) Figure 10. Thermal Response http://onsemi.com 6 500 1.0 k 2.0 k 5.0 k 10 k 2N6071A/B Series ORDERING INFORMATION Device 2N6071A Package Shipping TO-225 2N6071AG TO-225 (Pb-Free) 500 Units / Box 2N6071AT TO-225 50 Units / Tube 2000 Units / Box TO-225 (Pb-Free) 50 Units / Tube 2000 Units / Box 2N6071ATG 2N6071B TO-225 2N6071BG TO-225 (Pb-Free) 500 Units / Box 2N6071BT TO-225 50 Units / Tube 2000 Units / Box TO-225 (Pb-Free) 50 Units / Tube 2000 Units / Box 2N6071BTG 2N6073A 2N6073AG 2N6073B 2N6073BG 2N6075A 2N6075AG 2N6075B 2N6075BG TO-225 TO-225 (Pb-Free) TO-225 TO-225 (Pb-Free) TO-225 500 Units / Box TO-225 (Pb-Free) TO-225 TO-225 (Pb-Free) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 7 2N6071A/B Series PACKAGE DIMENSIONS TO-225 CASE 77-09 ISSUE Z -BU F Q -A- C M 1 2 3 H DIM A B C D F G H J K M Q R S U V K J V G S R 0.25 (0.010) A M M B M D 2 PL 0.25 (0.010) M A M B NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 077-01 THRU -08 OBSOLETE, NEW STANDARD 077-09. M INCHES MIN MAX 0.425 0.435 0.295 0.305 0.095 0.105 0.020 0.026 0.115 0.130 0.094 BSC 0.050 0.095 0.015 0.025 0.575 0.655 5 _ TYP 0.148 0.158 0.045 0.065 0.025 0.035 0.145 0.155 0.040 --- MILLIMETERS MIN MAX 10.80 11.04 7.50 7.74 2.42 2.66 0.51 0.66 2.93 3.30 2.39 BSC 1.27 2.41 0.39 0.63 14.61 16.63 5 _ TYP 3.76 4.01 1.15 1.65 0.64 0.88 3.69 3.93 1.02 --- STYLE 5: PIN 1. MT 1 2. MT 2 3. GATE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 8 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative 2N6071/D