MASW-008566TR-3000 - M/A-COM Technology Solutions

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

GaAs SP4T 2.5 V High Power Switch

DC - 3.0 GHz

Rev. V1

MASW-008566

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• Low Voltage Operation: 2.5 V

• Low Harmonics: < -65 dBc at +34 dBm & 1 GHz

• Low Insertion Loss: 0.65 dB @ 1 GHz

• High Isolation: 23 dB @ 2 GHz

• 0.5 micron GaAs PHEMT Process

• Lead-Free 4mm 16-lead PQFN Pa ckage

• 100% Matte Tin Plating over Copper

• Halogen-Free “Green” Mold Compound

• 260°C Reflow Compatible

• RoHS* Compliant Version of MASWSS0118

Description

M/A-COM’s MASW-008566 is a GaAs PHEMT

MMIC single pole four throw (SP4T) high power

switch in a low cost 4 mm 16-lead PQFN package.

The MASW-008566 is ideally suited for applications

where high power, low control voltage, low insertion

loss, high isolation, small size, and low cost are

required.

Typical applications are for GSM and DCS handset

systems that connect separate transmit and receive

functions to a common antenna, as well as other

handset and related applications. This part can be

used in all systems operating up to 3.0 GHz

requiring high power at low control voltage.

The MASW-008566 is fabricated using a 0.5 micron

gate length GaAs PHEMT process. The process

features full passivation for performance and

reliability.

Functional Schematic

Pin No. Pin Name Description

1 V1 Control 1

2 RF1 RF Port 1

3 GND RF Ground

4 RF2 RF Port 2

5 GND RF Ground

6 V2 Control 2

7 V3 Control 3

8 GND RF Ground

9 RF3 RF Port 3

10 GND RF Ground

11 GND RF Ground

12 RF4 RF Port 4

13 GND RF Ground

14 V4 Control 4

15 GND RF Ground

16 ANT Antenna Port

17 Paddle 3 RF Ground

Pin Configuration

3. The exposed pad centered on the package botto m must be

connected to RF and DC ground.

Part Number Package

MASW-008566-TR3000 3000 piece reel

MASW-008566-001SMB Sample Board

Ordering Information1,2

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

1. Reference Application Note M513 for reel size information.

2. All sample boards include 5 loose parts.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

GaAs SP4T 2.5 V High Power Switch

DC - 3.0 GHz

Rev. V1

MASW-008566

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Electrical Specifications: TA = 25°C, Z0 = 50 Ω 4

Parameter Test Conditions Units Min. Typ. Max.

Insertion Loss5 DC – 1 GHz

1 – 2 GHz

2 - 3 GHz

—

0.65

0.80

1.00

0.85

1.00

—

Isolation DC – 1 GHz

1 – 2 GHz

2 - 3 GHz

—

29.0

23.0

18.5

—

Return Loss DC – 3 GHz dB — 20 —

IP3 Two Tone +26 dBm, 5 MHz Spacing, > 50 MHz

VC = 0 V / 2.5 V dBm — 57 —

P.1dB VC = 0 V / 2.5 V dBm — 38 —

2nd Harmonic 1 GHz, PIN = +34 dBm, VC = 0 V / 2.5 V dBc — -80 -71

3rd Harmonic 1 GHz, PIN = +34 dBm, VC = 0 V / 2.5 V dBc — -68 -65

Trise, Tfall 10% RF to 90% RF, 90% to 10% RF, VC = 0 V / 2.5 V µS — 0.2 —

Ton, Toff 50% control to 90% RF, 50% control to 10% RF, VC = 0 V /

2.5 V µS — 0.2 —

Transients mV — 35 —

Control Current VC = 0 V / 2.5 V, 34 dBm µA — 10 50

IP2 Two Tone +26 dBm, 5 MHz Spacing, > 50 MHz

VC = 0 V / 2.5 V dBm — 81 —

4. External DC blocking capacitors are required on all RF ports.

5. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 - 500 MHz, 39 pF for 0.5 - 3 GHz.

V1 V2 V3 V4 ANT-

RF1

ANT-

RF2

ANT-

RF3

ANT-

RF4

1 0 0 0 On Off Off Off

0 1 0 0 Off On Off Off

0 0 1 0 Off Off On Off

0 0 0 1 Off Off Off On

Truth Table 8,9

8. Differential voltage, V (state 1) -V (state 2), must be 2.5 V

minimum.

9. 0 = -5 V to +2.5 V, 1 = -2.5 V to +5 V

Parameter Absolute Maximum

Input Power

(0.5 - 3.0 GHz, 2.5 V Control) +38 dBm

Voltage ± 8.5 volts

Operating Temperature -40°C to +85°C

Storage Temperature -65°C to +150° C

Absolute Maximum Ratings 6,7

6. Exceeding any one or combination of these limits may cause

permanent damage to this device.

7. M/A-COM does not recommend sustained operation near

these survivability limits.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

GaAs SP4T 2.5 V High Power Switch

DC - 3.0 GHz

Rev. V1

MASW-008566

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Typical Performance Curves

Insertion Loss vs. Temper ature

1 GHz 2nd Harmonic Rejection

Isolation vs. Temperature

1 GHz 3rd Harmonic Rejection

0.0

0.4

0.8

1.2

1.6

0.5 1.0 1.5 2.0 2.5 3.0

+25°C

+85°C

-40°C

Frequency (GHz)

0.5 1.0 1.5 2.0 2.5 3.0

+25°C

+85°C

-40°C

Frequency (GHz)

-100

-90

-80

-70

-60

-50

2.02.53.03.54.04.55.0

+25°C

+85°C

-40°C

Control Voltage (V)

-100

-90

-80

-70

-60

-50

2.02.53.03.54.04.55.0

+25°C

+85°C

-40°C

Control Voltage (V)

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

GaAs SP4T 2.5 V High Power Switch

DC - 3.0 GHz

Rev. V1

MASW-008566

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Lead-Free 4 mm 16-Lead PQFN†

† Reference Application Note M538 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.