60W, 100-277Vac Input, Constant Current LED Driver
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
February 5, 2019
1 / 4
“Panel Mount with J-Box” LFWCD060SXXXSS-PM Series
*Product images are for illustrative purposes
only and may vary from actual design.
◼ Features
• Power Rating: 60W
• Input Voltage: 100-277Vac
• Constant current design
• Fixed output current(300mA-1500mA)
• Efficiency to 87%
• 0-10V/PWM/RX Dimming
• Dimming range 0-100%
• Dim-to-off
• OCP, SCP
• UL Class P / Class 2
• IP20
• 5-year warranty
• Surge Protection level L-N: 1kv
◼ Application
• Indoor or outdoor lights
• Dry or Damp locations
◼ Model List*(See part number scheme for model number details)
Model Number
Input
Voltage Range
Output
Power
Output
Voltage
Output
Current Min.
Output
Current Max.
Efficiency
Certification
LFWCD060S030SS-PM
100-277Vac
60W
25-40V
300mA
300mA
87%
UL
LFWCD060S040SS-PM
100-277Vac
60W
25-40V
400mA
400mA
87%
UL
LFWCD060S050SS-PM
100-277Vac
60W
25-40V
500mA
500mA
87%
UL
LFWCD060S060SS-PM
100-277Vac
60W
25-40V
600mA
600mA
87%
UL
LFWCD060S070SS-PM
100-277Vac
60W
25-40V
700mA
700mA
87%
UL
LFWCD060S080SS-PM
100-277Vac
60W
25-40V
800mA
800mA
87%
UL
LFWCD060S090SS-PM
100-277Vac
60W
25-40V
900mA
900mA
87%
UL
LFWCD060S100SS-PM
100-277Vac
60W
25-40V
1000mA
1000mA
87%
UL
LFWCD060S110SS-PM
100-277Vac
60W
25-40V
1100mA
1100mA
87%
UL
LFWCD060S120SS-PM
100-277Vac
60W
25-40V
1200mA
1200mA
87%
UL
LFWCD060S130SS-PM
100-277Vac
60W
25-40V
1300mA
1300mA
87%
UL
LFWCD060S140SS-PM
100-277Vac
60W
25-40V
1400mA
1400mA
87%
UL
LFWCD060S150SS-PM
100-277Vac
60W
25-40V
1500mA
1500mA
87%
UL
◼ Technical Data
Input voltage range
100-277Vac
Frequency
47-63Hz
Power factor
> 0.9 under 120~277Vac input with 80~100% load condition (for all output currents)
THD
< 15% under 120~277Vac input with 80~100% load condition (for all output currents)
60W, 100-277Vac Input, Constant Current LED Driver
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
February 5, 2019
2 / 4
“Panel Mount with J-Box” LFWCD060SXXXSS-PM Series
◼ Technical Data(cont.)
Current accuracy
±3%
Efficiency
87%@100-277Vac & 100% load (see charts)
Output Voltage
25-40V
Protection
Open circuit protection: Hiccup mode. Protection will trigger when load voltage exceeds
specified output voltage and will auto recover after the fault mode is removed.
Short circuit protection: Hiccup mode. Protection will trigger when short circuit and will
auto recover after the fault mode is removed.
Dimensions LxWxH
180x76x33mm
Weight
TBD
Packing
28pcs/carton; Carton 485x342x201mm
◼ Safety Compliance
Safety Standard
GB19510.1, GB19510.14; EN61347-1, EN61347-2-13; UL8750, CSA C22.2 No. 250.13-12
Dielectric Strength
I/P-OP:3750Vac/5mA/60S
Insulation Resistance
I/P-O/P: > 10M Ohms/500Vdc/25˚C/70% RH
Leakage Current
The leakage current shall be less than 0.25mA for Class 2 at maximum input voltage
EMI
GB17743, GB17625.1; EN55015, EN61000-3-2, EN61000-3-3
EMS
EN61000-4-2,3,4,5,6,8,11, EN61547
Notes:
1. The parameters above including the power factor, THD, efficiency are all tested under the ambient temperature
25˚C and humidity 50%, AC input 230V and 90% output load.
2. Io is rated output current.
◼ Dimming Features
Dimming Function
0-10V
PWM
RX
%
0
10
20
30
40
50
60
70
80
90
100
open
0-10V
0
9.4%
21.65%
33.23%
45.29%
57.64%
69.8%
82.05%
94.01%
100%
100%
100%
PWM
0
10.92%
25.54%
39.31%
52.04%
64%
75.02%
85.37%
94.58%
100%
100%
100%
RX
0
9.4%
21.65%
32.23%
45.29%
57.64%
69.8%
82.05%
94.01%
100%
100%
100%
Notes:
1. % refers to the percentage of the dimming signal.
2. 0-10V, PWM, RX refers to three different dimming functions, the percentage of the output current for the
corresponding dimming signal percentages.
60W, 100-277Vac Input, Constant Current LED Driver
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
February 5, 2019
4 / 4
“Panel Mount with J-Box” LFWCD060SXXXSS-PM Series
*Product images are for illustrative purposes only and may vary from actual design.
*Specifications are subject to change without notice. Autec is not responsible for issues arising from errors or
omissions.
S=Class II, 2 Wire Input
Part Number Scheme
LF W C D 060 S XXX S S -PM
LF=LED Driver Series
C=Constant Current
D=Dimming
S=Single Output
060=Output Power (Watts)
W=Input Voltage 100-277Vac
120VAC
XXX=Rated Current
Ex.) 030=300mA
150=1500mA
S=Metal case
-PM=Panel Mount Series
