39
KOA Speer Electronics, Inc. • Bolivar Drive • P.O. Box 547 • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
CN
concave termination with square corners
resistor array
Absolute
Maximum
Working
Voltage
Resistance
Tolerance
Resistance
Range
E-24
Part
Designation
Maximum
Overload
Voltage
(5 Secs. Max.)
Operating
Temperature
Range
Power Rating
@ 70°C
(Per Element)
T.C.R.
(ppm/°C)
Max.
applications and ratings (2%, 5% tolerance)
circuit schematic
CN1J
CN2A
CN2B
1/16W (.063W)
1/10W (.100W)
1/8W (.125W)
50V
100V
100V
200V
200V 400V
-55°C to +150°C±200 10Ω- 1MΩG: ±2%
J: ±5%
Absolute
Maximum
Working
Voltage
Resistance
Tolerance
Resistance
Range
E-24, E-96
Part
Designation
Maximum
Overload
Voltage
(5 Secs. Max.)
Operating
Temperature
Range
Power Rating
@ 70°C
(Per Element)
T.C.R.
(ppm/°C)
Max.
applications and ratings (1% tolerance)
CN1J
CN2A
CN2B
1/16W (.063W)
1/10W (.100W)
1/8W (.125W)
50V
100V
100V
200V
200V 400V
-55°C to +125°C±100 10Ω- 1MΩF: ±1%*
* RCWV = Rated Continuous Working Voltage.
Performance Characteristics
Parameter
Thermal Shock MIL-STD-202, Method 107, -55°C to +125°C, 5 cycles
±(1.0% + 0.1Ω)
Low Temperature Operation MIL-R-55342 π4.7.4, 1 hour @ -55°C followed by 45 minutes of RCWV*
High Temperature Exposure MIL-R-55342 π4.7.6, 100 hours @ 125°C
Short Time Overload MIL-R-55342 π4.7.5, 2.5 x RCWV for 5 seconds
±(2.0% + 0.05Ω)
Resistance to Solder Heat MIL-R-55342 π4.7.7, 260°C for 10 seconds
1.2 Kg for 1 minute
±(1.0% + 0.1Ω)
±(0.5% + 0.05Ω)
Terminal Strength-Push
Terminal Strength-Bend 5mm deflection in either direction for 10 seconds
Moisture Resistance MIL-STD-202, Method 103, 40°C, 90 - 95% RH, 1000 hours
±5.0%
±1.0%
Life
Dielectric Withstanding Voltage
CN1J, CN2A, CN2B
Pulse
Temperature Cycling
MIL-STD-202, Method 108, 70°C,
1000 hours @ RCWV, 1.5 hr ON, 0.5 hr OFF
2.5 x RCWV, not exceeding max. overload voltage, 1 sec. ON, 25 sec. OFF, 10,000 cycles
30 min. @ -55°C, 15 min. @ +25°C, 30 min. @ +125°C, 15 min. @ +25°C, 5 cycles
15 Grams Minimum
Terminal Adhesion Axial pull, one terminal at a time
—
1 minute minimum
MIL-STD-202, Method 301
100V, 400V, 400V
Insulation Resistance 1,000 MΩMinimum
Maximum ∆R Test Method
resistor
arrays
* without CN2A8, CN2B8