T PL IA N M CO Features Applications 6 kA, 8/20 s surge capability High power DC bus protection *R oH S Low clamping voltage under surge Bidirectional TVS Excellent performance over temperature PTVS6-xxxC-TH Series High Current TVS Diodes General Information The Model PTVS6-xxxC-TH Series high current bidirectional TVS diodes are designed for use in high power DC bus clamping applications. These devices offer bidirectional port protection and are available with standoff voltage ratings of 58 V and 76 V. The devices are RoHS* compliant. They also meet IEC 61000-4-5 8/20 s current surge requirements. Absolute Maximum Ratings (@ TA = 25 C Unless Otherwise Noted) Rating PTVS6-058C-TH PTVS6-076C-TH Repetitive Standoff Voltage Peak Current Rating per 8/20 s IEC 61000-4-5 Symbol Value Unit VWM 58 76 V IPPM 6 kA Operating Junction Temperature Range TJ -55 to +125 C Storage Temperature Range TS -55 to +150 C 260 C Lead Temperature, Soldering (10 s) Electrical Characteristics (@ TA = 25 C Unless Otherwise Noted) Parameter ID Test Conditions Standby Current Clamping Voltage (1) per IEC61000-4-5 (8/20 s current waveform) IBR = 10 mA PTVS6-058C-TH PTVS6-076C-TH IPP = 6 kA PTVS6-058C-TH PTVS6-076C-TH V(BR) Temperature Coefficient C Capacitance Typ. Max. Unit 10 A 64 85 66 92 70 95 V 110 140 V VD = VWM V(BR) Breakdown Voltage VC Min. F = 10 kHz, Vd = 1 Vrms PTVS6-058C-TH PTVS6-076C-TH 0.1 %/C 4.5 3.3 nF (1) V measured at the time which is coincident with the peak surge current. C Asia-Pacific: Tel: +886-2 2562-4117 * Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 * Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 * Fax: +1-951 781-5700 www.bourns.com *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PTVS6-xxxC-TH Series High Current TVS Diodes Performance Graphs Percentage VBR Change vs. Junction Temperature VBR Change vs. Temperature (%) V-I Characteristic 12 10 8 Normalized to 25 C 6 4 2 0 -2 -4 -6 -8 -10 -12 -40 -20 0 20 40 -60 -80 100 120 140 Junction Temperature (C) Typical Surge Current Derating Percent of Rated Value 120 110 100 90 80 70 60 50 40 30 20 10 0 0 25 50 75 100 125 150 175 Ambient Temperature (C) This graph shows the typical device surge current derating versus ambient temperature when subjected to the 8/20 s current waveform per the IEC 61000-4-5 specification. This device is not intended for continuous operation at temperatures above 125 C. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PTVS6-xxxC-TH Series High Current TVS Diodes Product Dimensions Epoxy encapsulation materials conform to UL 94V-0. Silver plated lead finish conforms to the solderability requirements of JESD22-B102, Pb free solder. Package dimensions are shown below: G Dim. F A B D C C D H E B F E A DIMENSIONS: MM (INCHES) G H Typical Part Marking PTVS6-058C-TH .......................................................................6058 PTVS6-076C-TH .......................................................................6076 PTVS6-058C-TH PTVS6-076C-TH 24.15 0.72 (0.951 0.028) 2.40 0.50 (0.094 0.020) 1.75 1.25 (0.069 0.049) 12.00 Max. (0.472) 1.25 0.05 (0.049 0.002) 11.50 Max. (0.453) 5.00 6.00 Max. Max. (0.197) (0.236) 6.00 1.00 (0.236 0.039) How to Order PTVS 6 - 076 C - T H Series PTVS = Power TVS High Current Diode Peak Current Rating 6 = 6 kA Repetitive Standoff Voltage 058 = 58 V 076 = 76 V Suffix C = Bidirectional Device Package T = Through-Hole Temperature H = High Temperature Series REV. 11/15 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, "Bourns"). Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R) product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns(R) product with other components in the user's application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns(R) product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns(R) product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns(R) product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns(R) product to meet the requirements of such industry standard or particular qualification. Users of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns(R) products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns(R) products in such unauthorized applications might not be safe and thus is at the user's sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns(R) standard products that are suitable for use in automotive applications on such products' data sheets in the section entitled "Applications." Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns(R) standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user's sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns(R) standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns(R) standard product in the data sheet as compliant with the AEC-Q standard or "automotive grade" does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns(R) standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns(R) standard products that are suitable for use in aircraft or space applications on such products' data sheets in the section entitled "Applications." Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns(R) standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user's sole risk. The use and level of testing applicable to Bourns(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R) custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R) products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns(R) products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R