NTC Thermistor:
::
:TTF Type
Insulation Film Type for Temperature Sensing/Compensation
THINKING ELECTRONIC INDUSTRIAL Co., LTD.
4
www.thinking.com.tw
2008.05
Recommended Reworking Conditions With Soldering Iron
Item Conditions
Temperature of Soldering Iron-tip 360℃ (max.)
Soldering Time 3 sec (max.)
Distance from Coating Can't touch film bottom
Reliability
Item Standard Test conditions / Methods Specifications
Tensile
Strength of
Terminals IEC60068-2-21
Gradually applying the force specified and keeping t
10±1 sec..
Terminal cross-sectional area
Force
(mm2) (Kg)
0.07<S≦0.2 0.5
No visible damage
Bending
Strength of
Terminals IEC60068-2-21
Hold specimen and apply the force specified below to each lead. Bend
the specimen to 90°, th
en return to the original position. Repeat the
procedure in the opposite direction.
Terminal cross-sectional area
Force
(mm2) (Kg)
0.07<S≦0.2 0.25
No visible damage
Solderability IEC60068-2-20
235 ± 5℃ , 2 ± 0.5 sec At least 95% of terminal
electrode is covered by
new solder
Resistance to
Soldering Heat IEC60068-2-20
260 ± 5℃ , 10 ± 1 sec No visible damage
∣△R
25
/R
25
∣≦ 3 %
High
Temperature
Storage IE600C68-2-2 100 ± 5℃ , 1000 ± 24 hrs No visible damage
∣△R
25
/R
25
∣≦ 5 %
Damp Heat,
Steady State IEC60068-2-3 40 ± 2℃ , 90~95% RH , 1000 ± 24 hrs No visible damage
∣△R
25
/R
25
∣≦ 3 %
Rapid Change of
Temperature IEC60068-2-14
The conditions shown below shall be repeated 5 cycles
Step Temperature (℃) Period (minutes)
1 -40 ± 5 30 ± 3
2 Room temperature 5 ± 3
3 100 ± 5 30 ± 3
4 Room temperature 5 ± 3
No visible damage
∣△R
25
/R
25
∣≦ 3 %
Life Test IEC 60539-1 25 ± 5℃, Pmax. , 1000 ± 24 hrs No visible damage
∣△R
25
/R
25
∣≦ 5 %
Insulation Test MIL-STD-202F-
Method 302 500 V
DC
1 min No visible damage
≧100 MΩ
Hi-pot Test MIL-STD-202F-
Method 301 1000 V
AC
10mA 1 min No visible damage