DISCLAIMER All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”),
disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product
described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited
to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products
shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications
do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products
designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
www.vishay.comVishay Intertechnology
SPECIFICATIONS AND TESTING
VJ...31 / VJ...34
AEC-Q200 Testing
No. AEC-Q200 Reference
1 Pre- and post stress electrical test User spec
3 High temperature exposure (storage) MIL-STD-202, Method 108
4 Temperature cycling JESD22, Method JA-104
5 Destructive physical analysis EIA-469
6 Moisture resistance MIL-STD-202, Method 106
7 Biased humidity MIL-STD-202, Method 103
8 Operation life MIL-STD-202, Method 108
9 External visual MIL-STD-883, Method 2009
10 Physical dimension JESD22, Method JB-100
13 Mechanical shock MIL-STD-202, Method 213
14 Vibration MIL-STD-202, Method 204
15 Resistance to solder heat MIL-STD-202, Method 215
16 ESD AEC-Q200-REV-C
17 Solderability J-STD-002
20 Electrical characterization User spec
21 Board flex AEC-Q200-005
22 Terminal strength AEC-Q200-006
23 Beam load AEC-Q200-003
General Specifications
C0G (NP0) Dielectric X5R, X7R, X8R Dielectric
Note:
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature:
–55 °C to +150 °C
(above +125 °C changed characteristics)
Capacitance Range:
1 pF to 22 nF
Temperature Coefficient of Capacitance (TCC):
±30 ppm/°C from –55 °C to +125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 Vrms and 1 kHz for values > 1000 pF
0.1 % maximum at 1.0 Vrms and 1 MHz for values ≤ 1000 pF
Voltage Range:
25 Vdc to 3000 Vdc
Insulating Resistance:
At +25 °C 100 000 M min. or 1000 F whichever is less
At +125 °C 10 000 M min. or 100 F whichever is less
Aging:
0 % maximum per decade
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for a
period of 1 s to 5 s and the charge/discharge current does not
exceed 50 mA
≤ 200 Vdc: DWV at 250 % of rated voltage
500 Vdc: DWV at 200 % of rated voltage
630 Vdc/1000 Vdc: DWV at 150 % of rated voltage
3000 Vdc: DWV at 120 % of rated voltage
Note:
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature:
–55 °C to +150 °C
(X5R above +85 °C changed characteristics)
(X7R above +125 °C changed characteristics)
Capacitance Range:
120 pF to 1.0 µF
Temperature Coefficient of Capacitance (TCC):
X5R: ±15 % from –55 °C to +85 °C, with 0 Vdc applied
X7R: ±15 % from –55 °C to +125 °C, with 0 Vdc applied
X8R: ±15 % from –55 °C to +150 °C, with 0 Vdc applied
Dissipation Factor (DF):
10 V ratings: 5 % maximum at 1.0 Vrms and 1 kHz
16 V, 25 V ratings: 3.5 % maximum at 1.0 Vrms and 1 kHz
> 25 V ratings: 2.5 % maximum at 1.0 Vrms and 1 kHz
Aging Rate:
1 % maximum per decade
Voltage Range:
10 Vdc to 1000 Vdc
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for a
period of 1 s to 5 s and the charge/discharge current does not
exceed 50 mA
≤ 200 Vdc: DWV at 250 % of rated voltage
500 Vdc: DWV at 200 % of rated voltage
630 Vdc/1000 Vdc: DWV at 150 % of rated voltage
General Certificates
• QualityManagementSystem
acc. to ISO/TS 16949
• QualityManagementSystem
acc. to ISO9000, Rev. 2000
• EnvironmentalCertification
acc. to ISO 14001
TRIM HERE — This panel is 8.125 inches wide
TRIM HERE — This panel is 8.125 inches wide