Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TP
– EEE-97 –
φ8
φD±0.5
φd±0.05
F±0.5
Sleeve
14 min.
3 min.
L
L<16:L±1.5
L>20:L±2.0
Pressure relief +
φ10<
φD±0.5
Radial Lead Type
Series: TP Type: A
Di men sions in mm (not to scale)
Body Dia. φD81012.51618
Lead Dia. φd0.60.60.6 0.8 0.8
Lead space F 3.5 5.0 5.0 7.5 7.5
Features
Endurance: 125 °C 2000 h to 5000 h or 135 °C 1000 h to 2000 h
Smaller than series TA
High ripple current (at high frequency) : 20 to 40% higher than TA series
RoHS directive compliant
Specifi cations
Category Temp. Range 40 °C to + 135 °C
Rated W.V. Range 25 V .DC to 35 V .DC
Nominal Cap. Range 100 µF to 5100 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
tan δ
W.V.(V) 25 35 (120Hz / +20 °C)
tan δ0.14 0.12
For capacitance value > 1000 µF , add 0.02 per every 1000 µF.
Endurance 1
After following life test with DC voltage and +125 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
φ8 : 2000 hours, φ
10 : 3000 hours, φ
12.5 : 4000 hours, φ
16 to φ
18 : 5000 hours
Capacitance change ±30% of initial measured value
tan δ< 300 % of initial specifi ed value
DC leakage current < initial specifi ed value
Endurance 2
After following life test with DC voltage and +135 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
φ8 : 1000 hours, φ
10 to φ
18 : 2000 hours
Capacitance change ±30% of initial measured value
tan δ< 300 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life 1 After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Shelf Life 2 After storage for 1000 hours at +135 °2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.
(V.DC) Cap. (µF) Frequency (Hz)
60 120 1 k 10 k 100 k
25 to 35
to 330 0.55 0.65 0.85 0.90 1.00
390 to 1000 0.70 0.75 0.90 0.95 1.00
1200 to 0.75 0.80 0.90 0.95 1.00
Frequency correction factor for ripple current
(Unit : mm)
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TP
– EEE-98 –
Standard Prod ucts
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
W.V. Cap.
20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia.
Length
Ripple
Current
(100 kHz)
(+125 °C)
Ripple
Current
(100 kHz)
(+135 °C)
E.S.R
(100 kHz)
(+20 °C)
tan δ
(120 kHz)
(+20 °C)
125 °C
Enduance
135 °C
Enduance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight Taping
B
(V) (µF) (mm) (mm)
(mA r.m.s.) (mA r.m.s.)
()
(hours) (hours)
(mm) (mm) (mm) (pcs) (pcs)
25
220 10 12.5 580 500 0.190 0.14
3000 2000
0.6 5.0 5.0
EEUTP1E221( )
200 500
330 10 16 1100 945 0.130 0.14
3000 2000
0.6 5.0 5.0
EEUTP1E331( )
200 500
470 8 20 1060 7600.067 0.14
2000 1000
0.6 3.5 5.0
EEUTP1E471L( )
200 1000
10 16 1100 945 0.130 0.14
3000 2000
0.6 5.0 5.0
EEUTP1E471( )
200 500
510 10 16 110 0 945 0.130 0.14
3000 2000
0.6 5.0 5.0
EEUTP1E511( )
200 500
820 10 20 1540 110 0 0.052 0.14
3000 2000
0.6 5.0 5.0
EEUTP1E821( )
200 500
1000 12.5 20 1860 1490 0.038 0.14
4000 2000
0.6 5.0 5.0
EEUTP1E102( )
200 500
1200 12.5 20 1860 1490 0.038 0.14
4000 2000
0.6 5.0 5.0
EEUTP1E122( )
200 500
1800 12.5 25 2180 1750 0.030 0.14
4000 2000
0.6 5.0 5.0
EEUTP1E182( )
200 500
16 20 2380 1985 0.029 0.14
5000 2000
0.8 7.5 7.5
EEUTP1E182S( )
100 250
2000 16 20 2380 1985 0.029 0.16
5000 2000
0.8 7.5 7.5
EEUTP1E202S( )
100 250
2200 16 25 2760 2300 0.022 0.16
5000 2000
0.8 7.5 7.5
EEUTP1E222( )
100 250
18 20 2700 2250 0.028 0.16
5000 2000
0.8 7.5 7.5
EEUTP1E222S( )
100 250
2700 16 25 2760 2300 0.022 0.16
5000 2000
0.8 7.5 7.5
EEUTP1E272( )
100 250
18 20 2700 2250 0.028 0.16
5000 2000
0.8 7.5 7.5
EEUTP1E272S( )
100 250
3300 16 31.5 3250 2710 0.018 0.18
5000 2000
0.8 7.5
EEUTP1E332
100
18 25 2960 2470 0.020 0.18
5000 2000
0.8 7.5 7.5
EEUTP1E332S( )
100 250
3900 16 31.5 3250 2710 0.018 0.18
5000 2000
0.8 7.5
EEUTP1E392
100
18 25 2960 2470 0.020 0.18
5000 2000
0.8 7.5 7.5
EEUTP1E392S( )
100 250
4700 18 31.5 3480 2900 0.016 0.20
5000 2000
0.8 7.5
EEUTP1E472
50
5100 18 31.5 3480 2900 0.016 0.22
5000 2000
0.8 7.5
EEUTP1E512
50
35
100 10 12.5 580 500 0.190 0.12
3000 2000
0.6 5.0 5.0
EEUTP1V101( )
200 500
120 10 12.5 580 500 0.190 0.12
3000 2000
0.6 5.0 5.0
EEUTP1V121( )
200 500
220 8 20 1060 7600.067 0.12
2000 1000
0.6 3.5 5.0
EEUTP1V221L( )
200 1000
10 16 1100 945 0.130 0.12
3000 2000
0.6 5.0 5.0
EEUTP1V221( )
200 500
270 8 20 1060 7600.067 0.12
2000 1000
0.6 3.5 5.0
EEUTP1V271L( )
200 1000
10 16 1100 945 0.130 0.12
3000 2000
0.6 5.0 5.0
EEUTP1V271( )
200 500
330 10 20 1540 110 0 0.052 0.12
3000 2000
0.6 5.0 5.0
EEUTP1V331( )
200 500
390 10 20 1540 110 0 0.052 0.12
3000 2000
0.6 5.0 5.0
EEUTP1V391( )
200 500
470 12.5 20 1860 1490 0.038 0.12
4000 2000
0.6 5.0 5.0
EEUTP1V471( )
200 500
560 12.5 20 1860 1490 0.038 0.12
4000 2000
0.6 5.0 5.0
EEUTP1V561( )
200 500
620 12.5 20 1860 1490 0.038 0.12
4000 2000
0.6 5.0 5.0
EEUTP1V621( )
200 500
820 12.5 25 2180 1750 0.030 0.12
4000 2000
0.6 5.0 5.0
EEUTP1V821( )
200 500
1000 16 20 2380 1985 0.029 0.12
5000 2000
0.8 7.5 7.5
EEUTP1V102( )
100 250
1200 16 20 2380 1985 0.029 0.12
5000 2000
0.8 7.5 7.5
EEUTP1V122( )
100 250
1500 16 25 2760 2300 0.022 0.12
5000 2000
0.8 7.5 7.5
EEUTP1V152( )
100 250
18 20 2700 2250 0.028 0.12
5000 2000
0.8 7.5 7.5
EEUTP1V152S( )
100 250
1600 16 25 2760 2300 0.022 0.12
5000 2000
0.8 7.5 7.5
EEUTP1V162( )
100 250
1800 16 31.5 3250 2710 0.018 0.12
5000 2000
0.8 7.5
EEUTP1V182
100
18 25 2960 2470 0.020 0.12
5000 2000
0.8 7.5 7.5
EEUTP1V182S( )
100 250
2000 16 31.5 3250 2710 0.018 0.14
5000 2000
0.8 7.5
EEUTP1V202
100
18 25 2960 2470 0.020 0.14
5000 2000
0.8 7.5 7.5
EEUTP1V202S( )
100 250
2200 18 31.5 3480 2900 0.016 0.14
5000 2000
0.8 7.5
EEUTP1V222
50
2700 18 31.5 3480 2900 0.016 0.14
5000 2000
0.8 7.5
EEUTP1V272
50
:
Substandard
(
E24series numbers
)
00 Nov. 2012